Special Price $39.99 Each Regular Price $49.99 Each
In stock
Cuts a deep channel that provides crisp definition for sign lettering and decorative V-grooving effects.

Rockler Solid Carbide Sign Making Router Bit - 19/32" Dia x 33/64" H x 1/4" Shank

Item #
91428
Rating:
96% of 100
Specially designed for routing letters in wood signs and intricate design work in flat panels. 60° V-groove point cuts deeper than a standard 90° bit, for more contrasting shadows and crisper definition at the edge of the groove. Features a three-flute design that has been precision ground to a fine point.
(1) Rockler Solid Carbide Sign Making Router Bit
More Information
Brand Rockler
Weight 0.1500
Bit Type Specialty, V-Groove
Diameter 19/32"
Cutter Height 33/64"
Shank Size 1/4"
Flutes 2
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

Prop 65 WarningWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
4.8 / 5.0
9 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
7
2
0
0
0
Works great
This bit works great for my sign making.
March 19, 2018
Purchased
1 year ago
Woodworking Experience:
Intermediate
Used to decorate a turned walnut bowl
The Sign Making "V-bit" was used to create the decoration on the turned bowl.
Walnut bowl with birds eye maple lid and ebony finial top view. V bit used to create decoration.
Walnut bowl with birds eye maple lid and ebony finial side view. V bit used to create decoration.
November 7, 2017
Purchased
1 year ago
Woodworking Experience:
Intermediate
Good but got the job done
All created at          Graphicspider . com out of 1" acrylic using this bit
All created at          Graphicspider . com out of 1" acrylic using this bit
All created at          Graphicspider . com out of 1" acrylic using this bit
All created at          Graphicspider . com out of 1" acrylic using this bit
March 29, 2017
Purchased
over 2 years ago
Woodworking Experience:
Advanced
Expensive, But Worth It
I swore I would never even spend $30 on a single bit, as I was buying them for $1-$4 a piece. Here, I spent $60 on a single bit, and it was well worth it. There is an unbelievable difference between this bit and all other 60s. It won't disappoint.
September 25, 2016
Purchased
over 2 years ago
No Sanding Needed
It's sharp. No sanding needed. it's all I ask of a router bit.
March 14, 2016
Purchased
over 3 years ago
Woodworking Experience:
Advanced
60 Degree Sign Making Bit
I use this bit on my CNC machine on a regular bases. I commonly rout hardwood such as Oak, Cherry, Walnut and Maple and occasionally use MDF and Melamine. I have found this to be a very durable bit. The cuts are clean and accurate whether I am cutting large or small letters.
Sea Chest Lid for Coastguard Captain
Text cut with 60 Degree Sign Bit
Gymnastics Award Plaque 
Text cut with 60 Degree Sign Bit
Graduation Gift Plaque
Logo and Text cut with 60 Degree Sign Bit
February 22, 2016
Purchased
over 3 years ago
Woodworking Experience:
Advanced
A great tool
December 3, 2015
Purchased
over 3 years ago
Haven't had to use it for the project I was working on.
December 31, 2018
Purchased
8 months ago
This is only my second 60...
This is only my second 60 degree bit I have purchased but it seems as good as the Amana bit I got from [another source]. I use them pretty hard for my sign making business. This bit was slightly cheaper but a little higher shipping cost made the two bits about the same price for me. It shipped fast and I am pleased so far. []
February 3, 2008
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 5 answers
Why did you choose this?
Rockler Store
Great bit for my very detailed CNC pieces with thin lines
Benjmain K on Apr 15, 2019
For the precision of the bit, and the three-flute design.
Benjmain K on Sep 20, 2016
Great bit for my very detailed CNC pieces with thin lines
Benjmain K on Apr 15, 2019
What my daughter wanted for Christmas.
Paul C on Nov 24, 2017
For the precision of the bit, and the three-flute design.
Benjmain K on Sep 20, 2016
to make making signs easier
Wrex E. H on Mar 10, 2016
right bit for the job
roger a on Jan 22, 2016
For my CNC
Mark C on Jun 23, 2015
Again love the CNC needed a more precise router bit and this has done just that.
Edward K on May 25, 2015
Needed bits for new CNC
Scott H on May 20, 2015
I need this bit to make a V-Groove on the murphy bed exterior to match the doors in my house.
Kenneth R on Apr 17, 2015
What my daughter wanted for Christmas.
Paul C on Nov 24, 2017
to make making signs easier
Wrex E. H on Mar 10, 2016
Depth of v cut?
Jim F on Nov 17, 2015
BEST ANSWER: Need more info. Router size, machine size, shank size, material and set-up.
Do you buy 6 piece antique sign making router bit kits in wooden box?
Susan A on Dec 29, 2017
BEST ANSWER: No, I bought them individually as I don't have a need for more than that.