$19.99 Each
In stock

Through-The-Wall Dust Right® Port Kit

Item #
42401
Rating:
92% of 100
Through-The-Wall Dust Right® Port Kit Through-The-Wall Dust Right® Port Kit
Through-The-Wall Dust Right® Port Kit

Here's a great way to access your dust collector while keeping it in a sound insulated storage area! Has stepped fittings for the Dust Right® Handle or standard 4" hose (each sold separately).

(1) Through-The-Wall Dust Right® Port Kit
(1) Pair of Dust Right® Combo ports
(1) 4" x 12" Pipe
More Information
Brand Dust Right
Manufacturer Part Number TA28666-3K
Weight 1.7500
Tech Spec No
Tech Docs No
Size 4"
Material Plastic
Type Tool Port
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

Prop 65 WarningWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
4.6 / 5.0
21 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
16
4
0
0
1
Looks good easy to install
July 30, 2018
Purchased
3 months ago
Woodworking Experience:
Intermediate
Easy to install and very convenient
Installed my dust collector outside my small shop using the port kit to attach the hose inside. I can close the door and hardly hear the collectot
June 4, 2018
Purchased
1 year ago
Woodworking Experience:
Intermediate
Nice and easy solution.
When building my dust collection system, designing a thru-wall connection involved pipe (usually PVC) and adapting it for hose or duct use. These are a 'no adapter' solution. The only improvement I would request is for Rockler to design in screw holes in each corner of the flanges as you need them to secure them to the walls. Otherwise, well done.
April 4, 2018
Purchased
7 months ago
Woodworking Experience:
Advanced
Easy inside to i outside
Just what was needed
May 11, 2017
Purchased
1 year ago
Woodworking Experience:
Intermediate
Through the wall dust collector.
Works great easy to install.
March 7, 2017
Purchased
1 year ago
Woodworking Experience:
Intermediate
Exactly What I Needed
This is one of those little things that you never think you'd use until you actually buy one. Then you think "How did I ever get along without this?". This is how I always wanted the dust to exit my shop.
Wall Penetration
Wall Penetration
February 12, 2017
Purchased
1 year ago
Woodworking Experience:
Advanced
easy
It made going through the wall really easy and left a nice finished product on each side of the wall. It looked more prefestionnal.
January 1, 2017
Purchased
1 year ago
Woodworking Experience:
Intermediate
worked very well&looks good
October 22, 2016
Purchased
over 2 years ago
Woodworking Experience:
Intermediate
Used in a cyclone dust collector
Cutting this dust port in half gave me the perfect set of two connectors to 4" hoses and an extension pipe to build a cyclone dust collector. I used the Thein separator design and repurposed the fittings in this kit to connect the hoses to the separator.
September 4, 2016
Purchased
over 2 years ago
Woodworking Experience:
Advanced
It worked great. No holes for attaching to wall
February 28, 2016
Purchased
over 2 years ago
Woodworking Experience:
Advanced
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 7 questions Browse 7 questions and 66 answers
Why did you choose this?
Rockler Store
so I can put my collector outside my work shop room.
JERRY E on Jun 21, 2018
To finish my Vac. system off
Steve I on Jan 22, 2018
so I can put my collector outside my work shop room.
JERRY E on Jun 21, 2018
vaccum system in dental lab
Keith R on Feb 26, 2018
To finish my Vac. system off
Steve I on Jan 22, 2018
Rockler is the only company that I could find with this particular product to do what I needed to do.
Ronald W. W on Oct 29, 2017
need it
Mary G on Oct 24, 2017
needed to remodel my shop
Roy H on Sep 26, 2017
Dust collector too noisy. Plan to put outside shop.
Sam R on Jul 21, 2017
2 walls to pass
George K on Jul 6, 2017
To use to conect my garage to the shed with my generater in it. I will run the power cord to the el. box from the gen and my charger to the to the bat.
on the generater. It's my lets not go out in the rain or snow thing.
plant guy on Jun 27, 2017
vent system for Swietoslawski ebulliometer fugitive emissions from vapor liquid equilibrium condensers
George W on May 17, 2017
Saw a video by April Wilkerson
John R on May 13, 2017
Exit woodshop to outside dust collection system on other side of the wall.
HARRY D on Apr 19, 2017
I needed something like this for a long time. With this equipment I will use my dust system more often and with better results.
Eric B on Apr 18, 2017
Building a Shop. At the rough-in stage.
Robert H on Mar 15, 2017
building new shop.
michael f on Feb 26, 2017
to put noisy dust collector in another added on room
Harry T on Feb 24, 2017
Wanted to vent dust collector outside after exiting the cyclone seperator
troy m on Feb 21, 2017
to remove the primary dust collection system to an adjoining shed to my shop to cut down on shop noise
Alan T on Feb 17, 2017
So the noise of the dust collector is outside of my workshop.
Veryl K on Feb 15, 2017
Sawdust collection
Adam P on Feb 13, 2017
Best product for what I want to do
Christopher N on Jan 21, 2017
simple installation, from all appearances
Thomas P on Jan 3, 2017
To get the hose through a wall.
robert r on Dec 15, 2016
Installing system
richard b on Nov 25, 2016
Used to set dust collection room out side of my work space. Used it Thru the wall from my vacs
Frederick J on Nov 2, 2016
This works great and it's so easy to install. Well worth it. It allowed me to put my dust collector in a closet where it's nice and quiet. Yes, the remote for the collector came from Rockler and it works through the wall.
James E M on Nov 1, 2016
New installation
Stan P on Oct 28, 2016
I'm moving my dust collector to an enclosure outside my shop.
Howard J C on Sep 25, 2016
Mistake worthless product
Maynard B on Sep 20, 2016
EXPANDING DUST COLLECTION SYSTEM
MIKE C on Sep 17, 2016
To bridge wall between shop and vacuum system
Theresa M on Sep 5, 2016
My new shop for retirement will feature the dust collector outside the shop. The through-the-wall port will be just right.
Steve W on Sep 5, 2016
This looks so much cleaner in the shop than my old hose through the wall method. Plus no more drywall scrapes everywhere!
Paul D on Apr 23, 2016
moved dust collection unit to another room since it was so loud and ran the line thru the wall into the shop.
J E on Mar 25, 2016
The vacuum is noisy I am placing it in the next room. To connect this the wall received a hole to route the hose.
Dr B on Mar 16, 2016
To install my dust collector thru my outside wall into my shop.Outside is weather protected and the 30 micro filter will be ok out there.
Eugene H on Feb 22, 2016
Needed it, worked perfectly.
Bill on Dec 28, 2015
To make a Chip Separator, Intake Tube. To be modified from my Dewalt Planner.
dastine on Dec 27, 2015
to connect to an external dust vac
Jac N on Nov 17, 2015
moving dust collection outside the shop to reduce noise
Dana E on Nov 2, 2015
Only one on market, looking to run hoses down through the ceiling from the joists with a clean look
Ron Z on Oct 16, 2015
Good price and just what I need to place the dust collector outside the workshop room.
GARY N on Sep 22, 2015
Good standard quality
Sidney H on Aug 15, 2015
want to have the dust collector in different.
Kenneth F on Aug 14, 2015
to extend my shop vacuum into my work room
Robert S on Aug 9, 2015
I'm going to extend the my dust collecting options to include the porch. I'd like to be able to close the shop door when I work outside, which I can't if there's a hose in the way. (My shop has a porch.)
James R on Jul 29, 2015
To go through the wall from the dust collector to the workshop.
Jim S on Jul 26, 2015
Want to build vortex style thien separator and a down draft table rather than use it for its intended purpose.
Andrea D Q on Jul 5, 2015
perfect for my application from sound proof room to shop.
Tom B on Jun 22, 2015
kept the collector out of the shop
robert b on Jun 15, 2015
vaccum system in dental lab
Keith R on Feb 26, 2018
Rockler is the only company that I could find with this particular product to do what I needed to do.
Ronald W. W on Oct 29, 2017
Can I use this to vent my dust collector outside?
Matt K on Feb 19, 2017
BEST ANSWER: Matt,
I purchased this item for that purpose, but have yet to install it. But to answer your question, yes, this is an excellent fixture for venting your 4" dust collector to the outside. The only thing missing here for that purpose is a means of covering the outer opening. I intend to use a 4" dryer vent with a flap that opens and closes automatically. Or, you could get by using a 4" end cap, removing and replacing it manually with each use. But, this could be quite a hassle after awhile. If you need to use tape to connect the tubing of a vent cover to the tubing of this port kit, aluminum duct tape is pretty strong and works well for this. At any rate, I would have it placed high enough above ground level to prevent critters from having access. Also, make sure you are clear of any wiring, plumbing, or other obstructions in the wall. Depending on the exterior makeup of your building and how you plan to cover the opening, you may have to do a little engineering of your own to assure that it is caulked and leak-proof from a driving rain, or the runoff coming down the wall surface. If you have siding with planks or shingles that overlap, locate your opening just below an overlap so that the lip of the exterior flange can slide up underneath and behind the plank above. Pre-position the exterior flange first and mark where to cut so that you don't accidentally cut the opening too close to the overlap. Hope this helps and good luck!
Can this be used for dryer venting into a garage?
A shopper on Apr 7, 2015
BEST ANSWER: I would assume it could be used to vent a clothes dryer, however I would be concerned about the melting point of the plastic. I would not recommend using this product for a dryer vent. Metal products are readily available that provide a better comfort zone for safety.
Is this the right gate to use with my Rockler Through-the-Wall-Kit? My flange on my old gate, which vents outside, cracked and broke so I cannot attach a hose from the dust collector to it. The old gate attached to the kit wall plate with a short rubber hose fitting that has a hose clamp on one end and a rubber ridge that fit over a groove in the back of the blast gate. The new through the wall kit description says to use with this gate, but since there is no photo of the back of the thing, I am not sure.
JACOB T on Apr 2, 2017
Through-The-Wall Dust Right® Port Kit
Through-The-Wall Dust Right® Port Kit
Rockler 4'' StableGate™ Blast Gate
Rockler 4'' StableGate™ Blast Gate
BEST ANSWER: Hi Jacob, sorry I can't help you with this because I use my through the wall kit going directly to collector which is in its own room then I use a collection hose from other side and move it as needed to Machine being used. For me this works better than gates. Good luck. Tom
Is there a 6 inch version and can it accommodate a blast gate on either side?
Pondhockey on Jun 9, 2016
BEST ANSWER: If you are asking if there is a six inch diameter version I don't think there is. It can accommodate a blast gate on either side.
What is the exact outer diameter of the through-tube? I have ordered one of these and want to cut the hole in advance. Thanks
Chris on Dec 5, 2015
BEST ANSWER: The outer diameter is 3-7/8". A 4" hole saw works well but you can use a 3-7:8 hole saw, or an adjustable hole cutter to get a tighter fit. The flanges on each side of the wall, hide any gap that might exist using the 4" hole saw.
Do the instructions encourage installation at/near a wall stud ?
Roger P on Mar 5, 2017
BEST ANSWER: I INSTALLED ONE OF THESE A COUPLE OF YEARS AGO THROUGH DRYWALL ON BOTH SIDES. STAYED AWAY FROM THE WALL STUDS. THE PRODUCT DOES NOT CARRY ANY WEIGHT SO YOU DON'T NEED TO ATTACH IT TO OR NEAR A STUD. HOPE THIS HELPS. JON G.
More Suggestions