Protect and decorate the top corners of your steamer trunks! Large, ornate corners are made for corners where two sides meet the top. Available in Brass, Antique Brass or Nickel plated finishes.
(4) Trunk Corners
| Weight | 0.3300 |
|---|---|
| Tech Spec |
|
| Discountable | No |
3.9 / 5.0
9 Reviews
Trunk Project Hardware
The trunk corners arrived quickly and were exactly what I needed. These are high quality items that look really great.
Added Dec 28, 2017
- Was this review helpful? Yes (1) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (1)
- Flag as Inappropriate
They were the same as on a trunk made for me by my father-in-law. This was very special to me and the corners were rusted and ruined by moisture. These made it as good as new.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Trunk corners
They aware exactly what I wanted !!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Works well for my application
I use the trunk corners around work benches to save my shirts from ripping, The larger ones which are available from rockler work well for this application.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Everything old is new again.
I recently decided to finally refinish my daughter's military trunk. She died while a cadet at the USAFAcademy in 1988, and the trunk was returned to our family in less than pristine condition. The worst part was that it was missing a bottom corner. I ordered four new corners from your company, and with the new corners, a new paint job and interior refinishing, it is better than new.
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
I am building a steamer trunk...
I am building a steamer trunk using the plans that I purchased at Rockler. I have never used these corner trunk corners before. The lid requires that the corners be modified so as to conform to the less than 90 degree angles on the curved top. These brackets are very sturdy and I am finding it difficult to bend them to fit the corners.
Editor's note: With a style of corner such as this it is common to give the the edges of the box or lid a slight radius to give a better fit.
Editor's note: With a style of corner such as this it is common to give the the edges of the box or lid a slight radius to give a better fit.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
March 17, 2010
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
Would like them to be a touch smaller size, if they came in two sizes I would have picked the smaller of the two. But my costumer was happy, that was what counts.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions
Browse 4 questions
and 10 answers
Why did you choose this?
Rockler Store
I have used these with a speciality furniture piece I build and it gives the perfect finished look
Paul A
on Jul 16, 2018
To protect the trunk that I built.
jack
on Mar 10, 2018
I have used these with a speciality furniture piece I build and it gives the perfect finished look
Paul A
on Jul 16, 2018
Restoring an old trunk
Cathy P
on Jul 13, 2018
Restoring an old trunk
Cathy P
on Jul 13, 2018
To replace damaged old corners.
THOMAS M Z
on Feb 17, 2018
Please clarify the measurement 1-3/4 inches "from screw hole to "center of tab." What does the "center of tab" mean? More helpful to me would be the distance from the screw hole to the corner of the trunk itself. Thanks.
BEST ANSWER: See Technical Document for 90275 located on the on-line order page. The dimension is misleading until you look at the Technical Document.
- Reply
- Inaccurate
- Bruce G on Jun 13, 2016
- Purchased on Jan 4, 2015
Are these parts for the Woodsmith steamer trunk available in solid brass? I found that brass plating wears off in a couple of years.
Trunk Corners
BEST ANSWER: I mounted the brass plated hardware on a trunk I built 16 months ago and the plating has not worn off yet. As to whether they are available in solid brass, I don't have any information. I imagine the people at Rockler are better able to a swerve this question. Good luck. George H.
- Reply
- Inaccurate
- George H on Oct 15, 2018
- Purchased on Dec 2, 2016
How far outside the trunk do these protrude? I need to have the trunk fit inside a luggage rack so I need to know this in order to scale the outside dimensions of the trunk.
BEST ANSWER: 3/8 - 1/2". They are beautiful once installed. I installed the chrome/nickel on a dark wood stained hope chest
- Reply
- Inaccurate
- Chris H on Jul 24, 2019
- Purchased on Nov 3, 2017
What is the internal radius of the corner piece? I’m using it in a corner that’s rounded to 3/16” and need to find a brass corner with that same internal radius
BEST ANSWER: I had to radius the corners of the trunk I built by around 3/8” to get the corner protectors to sit flush. I did not realize that until after the trunk was stained and varnished and the corners were PERFECT. This required radius in all 8 corners, restraining, and varnishing.
I had to do that overnight since this type of hardware is the last thing to go on and I built the trunk for equestrian gear and we had an event literally the next day. not much sleep...
This was partially my fault since it was the first time I had used this type of corner and did not understand the wood needed to be radiused, and really the first time building something that is basically fine furniture. But suggestion for Rockler: state this in the product description so people can plan ahead.
I had to do that overnight since this type of hardware is the last thing to go on and I built the trunk for equestrian gear and we had an event literally the next day. not much sleep...
This was partially my fault since it was the first time I had used this type of corner and did not understand the wood needed to be radiused, and really the first time building something that is basically fine furniture. But suggestion for Rockler: state this in the product description so people can plan ahead.
- Reply
- Inaccurate
- Steve C on Oct 18, 2019
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.govWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Related Products
More Suggestions
