$37.50 Each
Temporarily Oversold

Laser crosshairs show the precise point where the drill bit will contact the workpiece—mounts to almost any drill press in just minutes!

Wixey WL133 Drill Press Laser Crosshairs

Item #
64784
Rating:
86% of 100

Wixey's WL133 Drill Press Laser projects a thin set of crosshairs to show the precise point where the drill bit will contact the workpiece. This allows you to quickly position your work so the hole is drilled exactly where needed, eliminating the need to repeatedly lower the bit to the surface to check for alignment. The laser attachment mounts in minutes and is quickly and easily aligned. After initial setup, the crosshairs stay centered regardless of workpiece thickness and table height.

Features:

  • Thin, precise crosshairs ensure drilling accuracy
  • Mounts quickly to nearly any drill press and is easy to adjust for center
  • Crosshairs stay on center at any table or workpiece height
  • Rugged steel frame construction stands up to heavy use and vibration
  • Uses 2 AA batteries (not included)

(1) Wixey WL133 Drill Press Laser Crosshairs
(2) AA batteries

More Information
Brand Wixey
Manufacturer Part Number WL133
Weight 1.1500
Tech Spec
  • Batteries: Two AA (included)
Technical Documents Wixey WL133 Drill Press Laser Crosshairs Manual
4.3 / 5.0
9 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
3
0
1
0
Wixey WL 133 Drill Press Laser Crosshairs
It installed easily and enables me to drill the exact spot that I want.
September 14, 2019
Purchased
3 weeks ago
Woodworking Experience:
Advanced
Nice upgrade
This was a nice upgrade for my ‘50s era drill press. I believe my grandpa would be impressed. Really speeds things up when drilling a series of holes. Super easy to install and setup.
September 13, 2019
Purchased
3 weeks ago
Woodworking Experience:
Advanced
I am very pleased with this the installation was easy the set up the same, I highly recommend this product.
September 2, 2019
Purchased
1 month ago
Nice little device - really convenient to use and ups the "cool factor"
This was very easy to install and set up. Comes with an extension plate and multiple positions to accommodate just about any size drill press.

Very clear instruction for setting up alignment in the X Y Z directions!!
June 6, 2019
Purchased
3 months ago
Woodworking Experience:
Advanced
Installed on drill press and adjusted. Basically works as advertised. Good value for price. Lines projected by laser do not cross at 90 degrees (forming a +). Rather they form a somewhat narrower "X" which makes it slightly less accurate and if you use a fence that blocks the lines. You can usually find workarounds and it does make positioning the part quicker.but
May 3, 2019
Purchased
5 months ago
Woodworking Experience:
Intermediate
Decent But Not Great
Not a bad product. But for my tastes, the laser light is a bit too bright and the beams too wide. The two factors contribute to my drill mark being washed out and/or barely visible. I still have to do my final alignment visually, with the beam turned off. Maybe it's just me, but I wish I could dim the light beams just a bit. Otherwise, not a bad tool.
September 8, 2019
Purchased
1 month ago
Woodworking Experience:
Intermediate
Fills the need
I’m sight impaired and need help finding the “right spot” for drilling without multiple guesses. This helps a lot. Easy to attach, easier to align the cross hairs. I wish the lasers were a little brighter but it works for me.
July 17, 2019
Purchased
3 months ago
Woodworking Experience:
Intermediate
Batteries were NOT included. Beam does nor extend much beyond the reference point.
May 16, 2019
Purchased
4 months ago
Woodworking Experience:
Advanced
Wixey WL133 Drill Press Laser Sight
I'm sorry to write that the plastic parts -- the battery holder and its lid -- are not robust. Further, one laser beam is weak. This makes the intersection of beams harder to distinguish. I am concerned that the tool may not survive in our busy shop.
April 22, 2019
Purchased
5 months ago
Woodworking Experience:
Intermediate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 9 answers
Why did you choose this?
Rockler Store
To make it easier to set up material on drill press
Rebecca M on Aug 29, 2019
I'm hoping this will save me time and allow me to be more accurate because of my poor eye sight.
Richard K on May 24, 2019
To make it easier to set up material on drill press
Rebecca M on Aug 29, 2019
Accurate lineup of bits with the workpiece should be much quicker and easier with this
DAVID M on Jul 4, 2019
I'm hoping this will save me time and allow me to be more accurate because of my poor eye sight.
Richard K on May 24, 2019
To replace a "Steel city" laser crosshair device.
George U on Apr 24, 2019
Seems like a perfect solution for aligning the workpiece to get accurate holes
Ron H on Mar 30, 2019
best price !!! EXCEPT I COULD NOT ENTER PROMO CODE FOR FREE SHIPPING
Kenneth P on Mar 7, 2019
Accurate lineup of bits with the workpiece should be much quicker and easier with this
DAVID M on Jul 4, 2019
To replace a "Steel city" laser crosshair device.
George U on Apr 24, 2019
does the center point automatically adjust when the distance from the drill bit to the piece change?
chris b on Aug 12, 2019
BEST ANSWER: Once calibrated the light beam intersection will accurately indicate the center point independent of the height of the table, distance from the drill bit to the work piece, etc. Our drill press is a shared tool. Given such a circumstance, calibration should be verified prior to demanding use.
More Suggestions