$59.99 Each
In stock
Cover emits a corrosion-inhibiting vapor that protects your table saw from rust for up to five years!

Zerust® No Rust Table Saw Cover

Item #
55324
Rating:
78% of 100

If exposed to the open air for long periods of time, the cast iron surfaces of your table saw will inevitably begin to rust. Not with the Zerust Table Saw Cover, however. Once installed, this proprietary cover emits non-toxic vapor corrosion inhibitors (VCIs) that surround your table saw to prevent rust, corrosion and electrochemical reactions. Of course, it also helps to shield your equipment from airborne moisture, dust and abrasions. The rust and corrosion inhibitors will remain active for 5 years after the date of purchase.


Features:
  • Remains effective for five years
  • Cleaner and more convenient than oil
  • Also great for other power tools such as lathes, jointers, planers and more
(1) Zerust® No Rust Table Saw Cover
More Information
Brand Zerust
Manufacturer Part Number 19050
Weight 1.2500
Tech Spec
  • Made in USA
  • Dimensions: 45''W x 63''L x 19''H
    3.9 / 5.0
    56 Reviews
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Star
    28
    11
    9
    1
    7
    Zerust Table Saw Cover Works Well!
    The Zerust No Rust Table Saw Cover works exactly as it is advertised to do. My south Texas garage is unconditioned and rust is a problem for any ferrous metal that isn't either covered in oil or wiped down and put in a cabinet. My table saw got covered in rust spots last summer and I decided to do something about it. After searching the internet through the various products out there, I settled on the Zerust. I cleaned the saw top and put the cover on the same day that it arrived. I have been completely rust free since then.

    After each use, I get up all dust with my collector, give the top a quick wipe down with my oiled rag, and pop back on the Zerust cover - the whole process takes about 2 minutes. I haven't had the cover for a very long time, however, the weather is currently in the worst time of year for my rust problems. I expect the performance to continue on through the rest of the warm months when rust is an issue, as there have been ZERO signs of new rust.

    I would recommend this cover for shops in almost any condition - you people with your power tools sitting out in the weather don't count. For everyone else (especially in less humid areas), this cover will work.
    July 11, 2019
    Purchased
    2 months ago
    Woodworking Experience:
    Advanced
    Works in the humid south
    I was surprised this works as well as it does. I live along the gulf coast where it is humid most of the year. While It helps to combat rust, I still have to keep multiple coats of wax on my table saw,
    May 10, 2019
    Purchased
    over 3 years ago
    Woodworking Experience:
    Intermediate
    Anti- Rust Table Saw Cover
    I gave this a five star rating although I haven't even taken it out of the package yet. I trust Rockler's comments about the product. With other things going on and my table saw being used as a catch-all table until I find time to put things up I just haven't had time to use the product.
    April 7, 2019
    Purchased
    5 months ago
    Woodworking Experience:
    Intermediate
    Zerust -NoRust Table Saw Cover
    Just got it ... appears to be working GREAT!

    Wish they had a product for my 6" Jointer
    April 1, 2019
    Purchased
    5 months ago
    Woodworking Experience:
    Intermediate
    I’ve had the cover on my saw for about 6 months. It has done the job keeping rust off the table top. I wish I had bought it sooner. Deffinetly a good investment.
    January 11, 2019
    Purchased
    11 months ago
    Woodworking Experience:
    Intermediate
    stops rust I hope
    This is going to work great in the shop, the saw wont get covered with dust and grime
    January 10, 2019
    Purchased
    8 months ago
    Woodworking Experience:
    Advanced
    It works.
    I originally bought one for my Bosch contractors table saw that I keep under a tarp all year (I live in southern Arizona). I think I've had that about 5 years - ABSOLUTELY NO RUST. I then bought one for my DeWalt 735W planer. Actually I bout it for the table saw and gave the original one to my planer. No rust in or on either the table saw and or the planer. I just now bought a third one; this one I'm going to cut in half - half for my miter saw and the other half for my antique table saw / jointer / drill press. It's been raining so I haven't had a chance to put in on the two machines. But so far, I love 'em!!!
    December 6, 2018
    Purchased
    9 months ago
    Woodworking Experience:
    Intermediate
    table saw cover
    works as described, so far i am happly with this purchase.
    October 12, 2018
    Purchased
    11 months ago
    Woodworking Experience:
    Advanced
    Great Product, fits on a 36" Sawstop PCS
    Fits well on my 36" Sawstop PCS, seems to protect well in the humid environment my garage shop is forced into.
    May 7, 2018
    Purchased
    1 year ago
    Woodworking Experience:
    Advanced
    Works great!
    This is the second one of these that I have bought. The first one was for me, my saw is on my patio, and I have yet to get any rust on my saw even during our raining season. The second one, I bought for my son in-law, his saw is outdoors like mine. I recommend this cover to anyone that is tired of having to remove rust off of their cast iron table saws.
    March 26, 2018
    Purchased
    1 year ago
    Woodworking Experience:
    Intermediate
    Start typing your question and we'll check if it was already asked and answered. Learn More
    Browse 4 questions Browse 4 questions and 15 answers
    Why did you choose this?
    Rockler Store
    To help protect my table saw from Florida humidity and rust
    Todd H on Jul 26, 2019
    Will use to cover my Delta Unisaw located in a garage shop.
    Larry C on Mar 23, 2019
    To help protect my table saw from Florida humidity and rust
    Todd H on Jul 26, 2019
    keep the rust off my table saw
    Stephen S on Mar 24, 2019
    Will use to cover my Delta Unisaw located in a garage shop.
    Larry C on Mar 23, 2019
    Just purchased new saw stop saw and this looked like a decent cover for a fair price. We'll see if it lives up to my expectations when I receive it. If it is the same quality as other products that I have purchased from Rockler ,Im sure it will exceed my expectations as usual.
    Dan L on Mar 19, 2019
    I needed around the clock protection for my table saw which is in an uninsulated garage.
    Kevin M on Mar 9, 2019
    Needed for my table saw.
    Jim on Mar 9, 2019
    Table saw is located in garage.
    I want to prevent rust due to condensation.
    Scott S on Mar 1, 2019
    My current table saw cover provides no protection from rust. I am hoping this will help with preventing rust on my table saw.
    James T on Mar 1, 2019
    easy then using a tarp
    Steve L on Sep 21, 2018
    To prevent rust on table saw once it is cleaned up.
    Roger B on Jul 8, 2018
    Shop is in unheated garage; rainy in winter. Infrequent use.
    Doug G on Mar 26, 2018
    to protect my tablesaw table top from rust...
    Les W on Mar 25, 2018
    My workshop is in a converted garage and cast iron tool surfaces can begin rust if left unused on high humidity days for even a short period of time. If this works as advertised this could really help inhibit rust on my table saw surface.
    Richard S on Mar 14, 2018
    Seems like worthwhile protection for my saw.
    JOHN P on Mar 9, 2018
    Tired of the 4 mil poly I'm using!
    Edward B on Mar 8, 2018
    have new sawstop saw want to keep it rust free
    Carolyn A on Mar 8, 2018
    moisture problem in workshop
    brett a r on Mar 6, 2018
    need one
    BARRY D on Mar 4, 2018
    I have one and really like it. I'm buying this one for my son in-law.
    Terry G on Mar 3, 2018
    Humidity is high in hawaii
    Steven j. M on Feb 24, 2018
    On my husband's Christmas list!
    Debra B on Dec 14, 2017
    to help preserve saw table
    Edward M on Dec 14, 2017
    high humidity
    PAUL J on Dec 13, 2017
    cause I need it
    Arnold J. O on Nov 28, 2017
    To keep my saw from rusting.
    Richard J on Nov 26, 2017
    keep my tools metal from rusting
    Jack G on Nov 22, 2017
    On Husband's wish list for Christmas
    Laura Sue M on Nov 10, 2017
    LIVE BETWEEN TWO SALT WATER INLETS. HOPE THE COVER WILL HELP WITH CONSTANT RUST PROBLEM.
    LOUIS A on Nov 6, 2017
    bought a new table saw want to protect my investment
    James V on Nov 4, 2017
    Function
    Viidorflash on Oct 30, 2017
    To cover my table saw
    John S on Oct 28, 2017
    Recently purchased tools that need to be covered for extending their longevity of life.
    Larry B on Sep 27, 2017
    Suppose to prevent rust
    John B on Sep 16, 2017
    Its the only one that I found that emits a vapor to prevent rust
    Theresa M on Aug 17, 2017
    Hoping it truly works to prevent rust.
    Neil S on Aug 16, 2017
    Good price and looks like a good product.
    Daniel C on Aug 14, 2017
    To protect my table saw from rust.
    Julius B on Aug 13, 2017
    Protect one of the largest investments in my shop.
    Jeff W on Aug 13, 2017
    WANT TO COVER MY MACHINES
    ALAN V on Apr 28, 2017
    I have a Powermatic PM2000, and need to do a better job protecting the top.
    John L on Apr 17, 2017
    Protect surface of a newly purchased table saw.
    Richard C on Apr 14, 2017
    It looks like a good way to protect a new saw I recently purchased that will be exposed to the weather. I hope to be able to make some good comments after I receive the cover and use it for some time.
    Gerald Z on Mar 30, 2017
    want to protect my tools
    Teryl A on Mar 14, 2017
    I like the no rust aspect of a fitted tarp for my new Sawstop
    DeWayne N on Mar 13, 2017
    to protect new saw from moisture in air during very
    cold and wet weather.
    Bruce M on Mar 13, 2017
    Seeking a better way to protect my tools in the high humid area I live.
    William S on Mar 10, 2017
    To stop rust on tablesaw and plainer.
    Mackinnon Y on Mar 9, 2017
    I live in a high humidity environment, so anywhere you can find a tool cover that combats rust is always appreciated. Protect your investments with some well purchased covers and they will outlast the motors that drive them.
    Todd R on Mar 3, 2017
    Because my table saw is not in a temperature controlled building.
    Calvin C on Jan 15, 2017
    Harsh Wisconsin winters are tough on my tools. So far so good with the Zerust cover
    Nathaniel E on Jan 9, 2017
    keep the rust off my table saw
    Stephen S on Mar 24, 2019
    Just purchased new saw stop saw and this looked like a decent cover for a fair price. We'll see if it lives up to my expectations when I receive it. If it is the same quality as other products that I have purchased from Rockler ,Im sure it will exceed my expectations as usual.
    Dan L on Mar 19, 2019
    I have a contractor SawStop with the 36in T-GLIDE set up. Will this fit? The overall length is 68in but wondering if there is any stretching or play in the fabric?
    JR N on Sep 21, 2016
    BEST ANSWER: There is no stretch in the fabric. I use it on a 60 inch long setup and there's a lot of looseness as the bag is quite a bit more front to back than I need. Playing with it just now, it could cover a 68 inch long setup if you don't mind a little bagging on the top by allowing the front-to-back seam to be inboard of the rails end. As the sewn depth is about 18 inches, there is still good coverage of the all-important bare steel top and the drawstring would still work.
    How did you get it to fit with a 52" fence? I have a Powermatic PM1000 Table Saw with 52 in. Accu-Fence System and it is well short if fitting.
    Rob B on Dec 23, 2016
    BEST ANSWER: I ordered this cover for a Delta 5100, all cast iron, table saw. The saw has a MLCS router tabletop extension which makes the total size of the top 66 ½ “X 32”. There is still about 4 inches in each direction, so it fits a little loose. There is room for the fence to fit under the cover though I remove the fence before putting the cover on. This is to prevent any sharp points from ripping the cover and also allows the saw to be rolled closer to the wall.
    Will this cover my professional saw stop table saw?
    Ron P on Dec 9, 2016
    BEST ANSWER: I bought this from Rockler during December to use on my Powermatic 10" saw with the 50" fence, the same one shown in the picture on Rockler's site. It does not fit my saw!
    Is the outer layer water proof? I'm unfortunate enough to have a roof leak in the shop that falls on the corner of my saw..
    Cody G on Dec 5, 2016
    BEST ANSWER: My saw is in an enclosed area so it does not get any water on it. I did put a little water on the cover and it seems to hold it without soaking in. I do like the cover and would recommend it.
    More Suggestions