$27.99 Each
In stock

24" Miter Slider Bar

Item #
27648
Rating:
88% of 100
Eliminate difficult and time-consuming setup operations while maintaining accuracy and repeatability! Extruded aluminum miter bar has adjustable aluminum runner for perfect sliding action and can be locked in place for stationary table saw and router table jigs. Make your own featherboards, small and large crosscut boxes, 45° miter jig and your own jig designs. Won't warp, swell or shrink (unlike wooden runners), so the jigs you build will fit perfectly time after time.
Features:
  • Available in 24" and 18" lengths.
  • Works with any standard 3/8" x 3/4" miter slot.
More Information
Brand Incra
Manufacturer Part Number IMS2
Weight 0.5500
Tech Spec
  • Available in 24" and 18" lengths.
  • Works with any standard 3/8" x 3/4" miter slot.
  • With easy to adjust width.
  • Universal threaded mounting holes.
  • Comes with FREE illustrated plans for making a variety of table saw jigs.
Technical Documents
Length 24"
Track Type Miter Bar
Prop 65 WarningWARNING: Cancer and Reproductive Harm. For more information go to www.P65warnings.ca.gov
Prop 65 Warning WARNINGDrilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. www.P65Warnings.ca.gov/wood.
4.4 / 5.0
12 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
7
4
0
1
0
Miter slide
I liked this item, and how it mounted to the jig I made for my table saw.. came with hardware for mounting,was easy to adjust to my saws miter grooves.
September 16, 2019
Purchased
1 month ago
Woodworking Experience:
Intermediate
Micro Aluminum Sliders
The Aluminum sliders worked very well on the table saw sled that I built. This is the first time I used the Micro Aluminum sliders and would recommend them
.
April 5, 2019
Purchased
6 months ago
Woodworking Experience:
Beginner
trust
work great , as advertised . your good to your word .
July 19, 2018
Purchased
1 year ago
Woodworking Experience:
Advanced
Great item to get when needing to make you own jugs for tools that have a miter slots.
May 5, 2018
Purchased
over 2 years ago
Woodworking Experience:
Intermediate
Building jigs an fixtures? Get this!
Made a table saw sled. These bars are so much better than something I would make from wood. Very adjustable for a perfect tight fit.
February 28, 2018
Purchased
1 year ago
Woodworking Experience:
Advanced
perfect for those jigs you must make.
May 27, 2017
Purchased
over 2 years ago
Woodworking Experience:
Intermediate
Made a good box joint jig
Fits slot in my Powermatic 2000 with no slop, and slides smoothlty.
April 23, 2017
Purchased
over 2 years ago
Woodworking Experience:
Intermediate
Great so far and will be using it more next month
July 2, 2019
Purchased
3 months ago
Woodworking Experience:
Intermediate
24" Miter Slider Bar
I needed this to make a crosscut sled for my table saw. Width adjustment is very good.
May 8, 2019
Purchased
5 months ago
Woodworking Experience:
Intermediate
24 inch Miter bars
These worked fine. I was a bit disappointed in the set-up. Based on my experience - you have to 'break' the adjusters free. When you first start turning the little allen screws to adjust to fit - they kind of snap and break free - once that happens you get some ability to tighten (or loosen) the fit. The allen screws are plastic - which doesn't inspire confidence, but all that being said: I have a good tight fit and the sled I made works as one would wish.
October 18, 2018
Purchased
11 months ago
Woodworking Experience:
Intermediate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 7 questions Browse 7 questions and 8 answers
Why did you choose this?
Rockler Store
Right length with three adjustments points, quality supplier good reviews
Philip C on Jun 19, 2019
sled build
Steve S on May 7, 2019
Right length with three adjustments points, quality supplier good reviews
Philip C on Jun 19, 2019
Cross cut jig construction.
matthew k on May 30, 2019
sled build
Steve S on May 7, 2019
need to make new sleds
Mark B on Mar 19, 2019
Planning on making a crosscut sled
Jerry S on Feb 21, 2019
Building a table saw jig
Thomas L on Jun 9, 2018
Stops for belt sander
Robert A on May 21, 2018
to make a jig
raul M on Mar 5, 2018
Building some jigs for table saw
dan c on Oct 11, 2017
I'd like something that I can make sleds with.
Daniel B on Apr 14, 2017
Company reputation for excellent products and customer support
John T on Apr 14, 2017
I plan on building a panel cutter for my table saw and need perfect miter slides.
Frank B on Jan 29, 2017
Cross cut sled for my table saw.
Montgomery C on Jan 22, 2017
want to make me a miter slide for my new table saw
SHAWN C on Dec 8, 2016
Building a table saw sled for new saw. Decided not to deal with movement on wooden runners.
Mario G on Nov 5, 2016
Cross cut jig construction.
matthew k on May 30, 2019
need to make new sleds
Mark B on Mar 19, 2019
Does this come with two bars or just one?
Michael H on Feb 1, 2017
BEST ANSWER: These are sold per each.
What track can I use this miter slider bar? And How long is it?
Evandrof18 on Oct 14, 2016
BEST ANSWER: This miter slider bar is designed to fit a standard 3/4" wide miter slot in a table saw. It is approximately 24" long. I built a crosscut sled using these slider bars, and it works great... be sure to lubricate the slider and the slot.
I have a craftsman 10 in 15 amp table saw will this work on it ?
Crystal D on Jan 29, 2018
BEST ANSWER: If the miter slot is 3/4" wide, this should work.
I have a craftsman table saw. The miter slot has a tab on each side at the top that runs the full length of the slot. I want to build a miter sled. Will the Micro work?
Jimbo on Jan 5, 2017
BEST ANSWER: You can use this item so long as the slots are 3/4" wide
How do you adjust the width to get a snug fit?
Duane H on Jul 30, 2017
BEST ANSWER: I was able to make it snug by just adjusting the screws..in the track...bob
Does this fit a porter cable table saw 10 inch ? Model #3812
Salvador C on Feb 18, 2017
BEST ANSWER: I don't know about Porter Cable but it fits my Delta. I think the miter slots are pretty standard on most table saws. check your measurements. they should be 3/4 inch wide by 3/16 inch deep.
I have a Ryobi table saw that has two pinch point in each slot. The miter piece has a bar that is larger at the bottom than the top. Will it fit?
Leif E on Apr 25, 2019