Rockler 30° Chamfer Router Bit - 1-3/8" Dia x 7/8" H x 1/2" Shank
The perfect bevel angle for six-sided objects.
Item #
24805
This chamfer bit can be used to apply a beveled edge to cabinetry and furniture elements, or to chamfer the edge joints for multi-sided objects. With a 30 degree angle, it's perfectly suited for hexagonal barrels or columns, and you can also use it to build segmented turning blanks.
(1) Rockler 30° Chamfer Router Bit
| Brand | Rockler |
|---|---|
| Weight | 0.2700 |
| Bit Type | Chamfer |
| Diameter | 1-3/8" |
| Cutter Height | 7/8" |
| Shank Size | 1/2" |
| Flutes | 2 |
4.9 / 5.0
7 Reviews
Great for long edges.
Great for long edges that need to be at 30 degrees. With the bearing it is easy to insure that the full edge and nothing more is cut. Much better than a rip on the table saw.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Bit cuts clean, runs true and is a great way to convert a 15 degree to 30 degree chamfer.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Great Bit
I bought this bit to help me replace some kitchen drawers for a friend of mine, it made the fronts look just like the old ones that I needed to replace.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
It worked well for the job we had to do
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
30 degree chamfer router bit
It leaves a very smooth cut on all surfaces, inexpensive and the warranty is great!
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question
Browse 1 question
and 10 answers
Why did you choose this?
Rockler Store
need 30 deg angle for special project. rockler has always been a good source for me
William D
on May 4, 2020
6 sided lighthouse project
George O
on Sep 26, 2019
need 30 deg angle for special project. rockler has always been a good source for me
William D
on May 4, 2020
Perfect bit for what I need!
DON W
on Dec 2, 2019
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.govWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Related Products
More Suggestions
