Overview
Cut cleaner, more precisely fitting dovetails with this 17/32" dovetail bit from Rockler. It's an ideal replacement dovetail bit for the Porter-Cable 4210 and 4212 dovetail jigs. With two finely ground carbide cutters, it stays sharper, longer, and its 1/2" shank increases rigidity for a more stable cut.
What's included
(1) 17/32" Dia. x 7 Degree Dovetail Router Bit
Technical Details
- Brand: Rockler
- Weight (lbs): 0.1500
- Bit Type: Dovetail
- Diameter: 17/32"
- Cutter Height: 3/4"
- Shank Size: 1/2"
- Flutes: 2
Questions and Answers
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions
Browse 2 questions
and 17 answers
Why did you choose this?
Rockler Store
is there a 1/4' shank version of 7° Dovetail Router Bit for Porter-Cable 43776PC - 17/32" Dia x 3/4" H x 1/2" Shank?
Reviews
5.0 / 5.0
7 Reviews
The Rockler PC bit is vastly...
The Rockler PC bit is vastly superior to the bit that Porter Cable supplies with their 4212 Dovetail Jig. Not only does the Rockler actually measure 17/32" in diameter (PC bit measured 16/32" which made setting the cutting depth a real chore) but the bit cuts quickly, easily and neatly. One of the best investments I've made recently! I'd encourage anyone that owns the 4212 jig to replace their PC bit with the Rockler bit.
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
February 24, 2009
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
It was much easier to set...
It was much easier to set my PC dovetail jig for half-blind dovetails with the Rockler bit installed than it had been previously with the PC-supplied bit. I found that the Rockler Bit cut very clean even in Baltic birch plywood drawer sides.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
September 20, 2009
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
Excellent Bit!
Very Smooth Cutting, works as advertised. I bought another.
Much better than the stock bit provided with jig.
Much better than the stock bit provided with jig.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
I have been using this product for few weeks now and love it. It took me a while to get the hang of things but after that its a breeze. Thank you so much
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
as advertised
Performed as expected. Arrived on time
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Wanted to try out this bit...
Wanted to try out this bit out vs P-C bit and Rockler wins hands down. Price is good. Cuts just like it should. Very pleased.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
September 7, 2008
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
I got router bit for my porter cable finger joint jig,it was a good substitute for my old one.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
More Suggestions
Regular Price:
Special Price
Rockler Bead Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank
Regular Price:
Special Price
Rockler Cove Vertical Raised Panel Router Bit - 1-1/4" Dia x 1-5/8" H x 1/2" Shank
Regular Price:
Special Price
