Rockler Bead In-Stile and Rail Router Bit Set - 1/2" Shank
Rout tight-fitting joints for beautiful frame and panel doors.
Item #
38951
Rockler stile and rail bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints. This stile and rail set includes two arbors that can be disassembled for enhanced versatility. You can shim out the tenon cutter for a precision fit, and you can even rearrange the cutters to cut joints for glass doors. The guide bearings also allow you to rout curved rails, such as those in arched doors, and even to rout curved joints.
Bead In-Stile and Rail Router Bit Set
(1) Beaded Round Over Stile Cutter
(1) Beaded Round Over Rail Cutter
| Brand | Rockler |
|---|---|
| Weight | 0.8500 |
| Bit Type | Stile & Rail |
| Diameter | 1-9/16" |
| Shank Size | 1/2" |
| Flutes | 2 |
5.0 / 5.0
5 Reviews
Works good easy to setup. Made doors and they look good can’t beleave I made them
Added Feb 4, 2018
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Great customer service.
The cutters worked to perfection. I'm a beginner woodworker. The cut profile was exactly what I wanted. Will be a repeat customer.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Easy set up, great results. I give a five
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Great Performer
I used this for a large cherry frame order. Cherry burns easily if you aren't careful when milling. This set performed flawlessly. The fit was perfect on assembly.
- Was this review helpful? Yes (5) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (5) No (0)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 9 questions
Browse 9 questions
and 23 answers
Why did you choose this?
Rockler Store
Good reviews
Michael O
on Jan 30, 2020
Needed to make doors
Gerald Livingston E
on Sep 13, 2019
Good reviews
Michael O
on Jan 30, 2020
Great price so why not
Mark Z
on Jan 9, 2020
what is the radius of the step bead past of the cutter?
BEST ANSWER: I don’t know what the radius is but I could check it and advise. I will not be able to check until I get home on December 2,
Ken
Ken
- Reply
- Inaccurate
- Ken B on Nov 26, 2017
- Purchased on Nov 24, 2016
can this bit be used to have a curved profile on both sides of the door?
BEST ANSWER: In principle the bits can but you need to have a precise reference for depth two dimension when routing the back of the rails & stiles.and a router table with a good fence. I have seen bits that do both faces simultaneously but don't know if Rocker shows them. If you found one I'm sure they could get it.
- Reply
- Inaccurate
- Peter L on Jul 18, 2016
- Purchased on Jun 6, 2015
Does anyone know the diameter of the radius ? Is it larger than Rockler catalog number 91947? How does #91947 differ from #38951?
How do you rearrange these bits to make a door with a glass panel?
BEST ANSWER: You don’t Freud makes a set for glass.
- Reply
- Inaccurate
- John on Jan 12, 2019
- Purchased on Jun 21, 2017
What router specs would you recommend for bits like this? As in how many horsepower? I'm looking to get a router to eventually use bits like these from Rockler. Thanks a lot!
Rockler Bead In-Stile and Rail Router Bit Set - 1/2" Shank
BEST ANSWER: I bought these and have not used them. I have various routers but a 2 1/2 HP should be more than sufficeient.
- Reply(1)
- Inaccurate
- Joe K on Jan 27, 2019
- Purchased on Apr 4, 2017
What panel router bit goes with this set?
BEST ANSWER: I used raised panel cove 3 1/2 “ cutter 1/2” shank. It did a good job. I made several passes because of the amount of wood I removed. I hope this helps.
Ken
Ken
- Reply
- Inaccurate
- Ken B on Dec 4, 2018
- Purchased on Nov 24, 2016
Can this set be used to make interior 3/4" cabinet doors & exterior 1&5/8 doors ?
BEST ANSWER: Although I have it's not made for ext.doors and will require a few extra steps. I suggest getting an extra. Door set.
- Reply
- Inaccurate
- George R on Jan 24, 2018
- Purchased on May 1, 2016
i need help with Rockler Bead In-Stile and Rail Router Bit Set - 1/2" Shank. i like to know how i can set up these bit or is a setup guide available? also the thckneee of the stail and the rail?
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.govWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Related Products
More Suggestions
