$29.99 Pack
In stock

Bench Accessory Kit

Item #
76% of 100
Bench Accessory Kit
Bench Accessory Kit

Be safe in your workshop with our new seven piece bench accessory kit. The seven piece Bench Accessory kit features a non-slip mat to prevent work pieces from moving while using a router or electric sander. Two hold down clamps for keeping your work piece against your bench and four Bench Dogs that hold your stock in place while belt sanding, hand planing or for securing other objects.

(1) Non-Slip Router Pad
(2) Hold Down Clamps
(4) Rockler Bench Dogs
More Information
Brand Rockler
Weight 3.5000
Tech Spec

Non-Slip Router Pad

  • 24" W x 36" L
  • Made of joined rubber squares
  • Black color

Hold Down Clamps

  • 4-1/4" reach
  • 8-1/4" long
  • 11/16" diameter

Rockler Bench Dogs

  • For all workbenches that have 3/4" dia. Holes
  • Low profile (7/16")
  • For working with 1/2" thick material and up
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

3.8 / 5.0
66 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Good Accessories
Work as advertised and reasonably priced.
June 2, 2019
2 months ago
Woodworking Experience:
Like it a lot.
May 22, 2019
2 months ago
I don’t like the plastic parts the hold down work fine suffice
April 18, 2019
3 months ago
Woodworking Experience:
Don't know what to say. They are a good addition to a working bench.
February 1, 2019
6 months ago
Hold fasts work well in bench and sawhorses!
December 2, 2018
8 months ago
bench dogs and holdfast
the hold fast holds my wood down very well.my bench is 3-1/2 inches thick with 3/4 inch holes.i wood recommend these for anyone
December 1, 2018
8 months ago
Woodworking Experience:
A complete kit for the bench
November 28, 2018
8 months ago
Awesome starter kit!
Great set of gear for my work bench (I bought two sets because it was a wonderful price) and my mobile work station.
November 21, 2018
8 months ago
Woodworking Experience:
I had to sand the blue off the shaft to make it hold.
November 16, 2018
8 months ago
Great deal on must have woodshop items
This is a great accessory kit for any woodshop, the hold downs are cast iron and work as well as any others on the market. The bench dogs are hardened plastic and work as well as any other set I've had. the non slip pad is much better than I expected, its much thicker and seems well made, So much better than te self liner pads I've been using. And best off you get all this for less than you can buy just one hold down for most anywhere else. Do yourself a favor and get this set or 2 heck I bought 3 at this price....
November 16, 2018
8 months ago
Woodworking Experience:
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 8 questions Browse 8 questions and 76 answers
Why did you choose this?
Rockler Store
building a bench
Walter Widdis A on Jul 10, 2019
to secure projects
Sue W on Jun 23, 2019
building a bench
Walter Widdis A on Jul 10, 2019
Coupon 15% off
Ken M on Jul 4, 2019
to secure projects
Sue W on Jun 23, 2019
Thought it would be handy
Joy T on Jun 20, 2019
Needed a starter bench accessory kit. Had a coupon.
David M on Jun 19, 2019
have used before. excellent product
James R on Jun 5, 2019
Bought a kreg like benchbwith round holes, and wanted a quick hold down clamp.
Kevin V on May 30, 2019
I've been gifted my Dad's amazing workbench. This is a great way to start getting things in order when working on the bench.
Doug K. on Apr 11, 2019
Only have two hands and find a third is required.
l paul S on Apr 5, 2019
Good reviews
Mariel B on Apr 4, 2019
should improve the accuracy and precision of project work
Paul B on Mar 24, 2019
need bench dogs and home depot has never heard of them:)
henry p on Mar 23, 2019
Looks like a good deal
Matthew T on Mar 18, 2019
I am building a new workbench and this is a good package.
James C. H on Feb 25, 2019
work bench
Harry W on Feb 24, 2019
needed for new bench and nice price for the set
clarence p on Feb 13, 2019
Have a bench that I can use this on now.
Gary B on Feb 11, 2019
I’ve bought others that don’t fit my dog holes. Neighbor that helped build my work bench recommended these. He built the same work bench as mine.
Tom on Feb 7, 2019
I am doing more hand tool work. The hold fast and bench dogs make that much easier
David on Feb 6, 2019
Great product, works awesome.
Matthew S on Jan 18, 2019
This is just simply a great deal !
Pamela K on Jan 9, 2019
ease of use
jeff e on Jan 1, 2019
To add to my new workbench
Jean R on Dec 26, 2018
On husbands wish list
Linda W on Dec 21, 2018
Hold down clamps were not included with my new workbench. The set seemed like a good value.
Larry M on Dec 17, 2018
Make life easier on the bench.
HAROLD N on Dec 12, 2018
I'm building a woodworking table and wanted an old school flair.
Carl S on Dec 11, 2018
My husband picked it out as a gift
Patti P on Dec 3, 2018
I need to hold down my work
James E L on Nov 26, 2018
Something I needed to add to my tool collection.
Kathy E on Nov 26, 2018
I needed to accessorize a bench and these 2 sets are an economical way to add some much-needed quality !
Keith E on Nov 25, 2018
need the bench hold fast
michael g on Nov 23, 2018
On my husbands CHristmas LIst
Kathy J on Nov 23, 2018
Upgrade for my new homemade workbench
Michael R on Nov 22, 2018
New bench, need dogs to hold materials.
Ralph327 on Nov 19, 2018
sharon y on Nov 19, 2018
building a new work bench and needed these
jACK J on Nov 17, 2018
I have a workbench but no hold downs and if the price hadn't been reduced I wouldn't have made either purchase
Kenneth R on Nov 15, 2018
Good price and reviews
Louis K on Nov 15, 2018
For new bench
Charles K on Nov 15, 2018
Don't keep in stock in store so purchase online
j m on Nov 14, 2018
Always wanted a good hold down and this is much more value for the price.
Dave on Nov 11, 2018
Good stiff hold downs are essential to my bench work.
Charles B on Nov 11, 2018
New bench top
Gilbert G on Nov 11, 2018
Building a real workbench soon and will need this kit, great price too!
Justin T on Nov 11, 2018
To use with new vise on old work bench.
Carroll P on Nov 10, 2018
Needed a router mat, saw this, and since I'm building my bench (plus I got it about half off the original price because it was on sale) it was pretty much a no brainer.
Brian K on Nov 10, 2018
to hold my work fast
michael s on Nov 10, 2018
Best price I've found for Hold downs & I've used and trusted Rockler for many years...
Dan F on Nov 10, 2018
convenient versatility for a portable workbench/sawhorse
Steven E S on Nov 9, 2018
Coupon 15% off
Ken M on Jul 4, 2019
Thought it would be handy
Joy T on Jun 20, 2019
What the hold downs made of ?cast iron or steel
Mike K on Feb 23, 2016
BEST ANSWER: they are cast. Says Taiwan on the side
what size hole do you drill for a 11/16"X8"X3.12" bench hold down?
Harvey S on May 26, 2015
BEST ANSWER: You need a hole that is 3/4"
hat MATERIAL are the bench dogs m,aDE OF?w
lyle c on Apr 15, 2018
BEST ANSWER: The dogs are some kind of strong plastic , I can’t break them.
I drilled a 3/4" hole in my bench top and when I hit the hold fasts it just bounces around and does not stick tight. Is this user error?
chris p on Feb 28, 2018
BEST ANSWER: Your bench top may be too thin. I glued and screwed a 2” x 2” piece of wood under my bench where I wanted the holes. Works fine.
Do hold down clamps work with an MDF workbench table top?
Everett M on May 24, 2017
For best strength I'd suggest a hardwood bench top when using hold downs. There is a lot of torque on the sides of the hole and the MDF isn't designed for this type of stress since it is made from fine chips and dust.

what diameter hole do I need to drill for bench dogs
bob l on Feb 22, 2016
BEST ANSWER: I drilled my holes with a 3/4 " bit. I already had holes so I made a template to enlarge the holes from 1/2" to 3/4". They fit fine.
I ordered the the hold down and it fits loosely in my bench holes (3/4"). I have a 2 x 4 laminated workbench that is 3.5" thick. Why does it fit so loosely?
Andrade on Mar 16, 2019
BEST ANSWER: My bench is the same thickness. I us a wooden mallet to slam it down. You might have something below the bench top that is preventing the hold down from going all the way down to lock the piece your going to
plane or otherwise work on. These things work really good!
More Suggestions