VIEW
34432
Special Price
$11.99
Each
Regular Price
$14.99
Each
In stock
Get dust around corners without compromising power or efficiency. The rubber boot provides a tight seal around your dust collection system input, giving you a leak-free portal toward a cleaner shop.
Features:
- Gets dust around corners without compromising power or suction
- Provides a tight seal on each end for leak-free suction
- Rubber boot is flexible to handle tugging when used with a hand-held suction hose
- Designed to work with the Dust Right® Handle (sold separately) or our 4'' hose (sold separately)
(1) Dust Right® Quick Connect 4'' Elbow
(2) Metal hose clamps
(2) Metal hose clamps
| Brand | Dust Right |
|---|---|
| Manufacturer Part Number | TATP-90 |
| Weight | 1.1000 |
| Size | 4" |
| Material | Plastic |
| Type | Elbow |
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.govWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
4.5 / 5.0
158 Reviews
Works great
Works great fit perfect on my planer and jointer
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Does what one would expect.
Nicely made.
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
Works Great
I can't get to the back of table saw for connect/disconnect plus simply bolted in the dust hose kinked it. I bought this elbow and so far it is working just fine. I have it connected to the out-port of the saw then to a 4 inch hose.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Perfect for bench top tools
I have a bench top planer and a jointer. These elbows are a perfect fit for both. I tried the straight connection which put the hose connection in the way of the out feed. She elbow eliminated the problem. And the rubber connector gave the assembly enough rigidity to hold everything in place. Great product.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Bag sucks
It work but the bag I bought suck it has a zipper that runs across the bottom of the bag which make it had to empty when full it should be on the side of bag or have the zipper around the bottom of bag which it would open with a big flap
Added Jun 21, 2019
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Works like a charm
Easy install - works as advertised
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Dewalt 735 Planer
Keeps the hose out of the way! Exactly what I wanted and works right with the quick connect handle. Love this system
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Perfect addition to my dust collection. eliminated a kink and a spot for a clog.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Perfect.
Just right, dimensions are perfect for Dewalt planer to bag.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Problem solver
I have a 4X5 foot out feed table behind my Powermatic 66. I like to store things under the out feed table. The hose laying on the floor gets in the way. This connector allowed me to make a hard 90 degree turn from the back of my saw straight to the wall, and freed up space under my out feed table. Problem solved.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 15 questions
Browse 15 questions
and 79 answers
Why did you choose this?
Rockler Store
Your quick connect handle won't fit normal sized 4" fittings, so I was forced to buy these to adapt what I had,
Keith J
on Jul 6, 2019
looks like it will fit my powermatic table saw
Bob G
on Jun 12, 2019
Your quick connect handle won't fit normal sized 4" fittings, so I was forced to buy these to adapt what I had,
Keith J
on Jul 6, 2019
Hoping to reduce restriction as flexible hose must turn 90 into table saw.
John S
on Jun 19, 2019
Hoping to reduce restriction as flexible hose must turn 90 into table saw.
John S
on Jun 19, 2019
I need it.
Frederick L
on Jun 1, 2019
What is the outside dimension of the male end and the inside of the female end?
BEST ANSWER: Male end 3.9295 at it's widest point. Female end 4.060 to 3.9200 since it is rubber it isn't round.
- Reply
- Inaccurate
- oz on Dec 13, 2016
- Purchased on Mar 3, 2015
How many inches des this stick out from the table saw port? I am building an outfeed table and need to know how much space it needs between the table saw and the side of the cabinet. Thanks
BEST ANSWER: I have the commercial grade Saw Stop table saw and it has a secondary exhaust tube for the saw blade, therefore combined, my elbow extends out 10 1/2" from the back of my saw
- Reply
- Inaccurate
- Ron H on Aug 22, 2016
- Purchased on Mar 3, 2015
do these swivel or are they fixed?
BEST ANSWER: They do not swivel. They will rotate if you do it gently. I like them, because it makes moving the hose so easy. I have a fitting on everything with the hand connector on the dust collector hose. It make life a lot easier to move things around.
- Reply
- Inaccurate
- Dave B on Jun 27, 2015
- Purchased on Apr 1, 2015
Does the 4" Dust Right handle fit over the male end of the elbow snugly ?
BEST ANSWER: Yes, it fits the same as other dust right fittings, as snugly as you would want and still be able to pull the handle off and move it to another machine. I have this four inch elbow on the back of my spindle sander which is up against the wall so the elbow was necessary to attach the handle.
- Reply(1)
- Inaccurate
- Terry Q on May 31, 2017
- Purchased on Jun 8, 2015
will this elbow connect to the wall mounted main unit?
Dust Right® Quick Connect 4'' Elbow
BEST ANSWER: The end of the elbow with the two clamps fits a 4" exterior diameter pipe/hose. Since the specs on the wall unit say it has a 4" intake, it should fit just fine. The clamped end is made of flexible rubber and seals to the pipe/hose/intake as you tighten the clamps. That said, the other end is made to fit the Dust Right handle.
- Reply
- Inaccurate
- Damon H on Aug 26, 2015
- Purchased on Apr 2, 2015
Will this connect directly to the dust right router table dual port fitting (#20225)?
BEST ANSWER: Yes, it will connect. I have this set-up on my router/table saw combo.
- Reply
- Inaccurate
- woodenbear on Dec 28, 2016
- Purchased on Feb 2, 2015
Will this attach to a Powermatic 66 dust port?
BEST ANSWER: It fits a standard 4' port, so if the Powermactic port is 4" you should be good to go. The band where the two clams are is flexible to compress around the port. As long as the port sticks out 2-3 inches, it should work.
- Reply
- Inaccurate
- Damon H on Jan 10, 2016
- Purchased on Apr 2, 2015
Can I use this in a bathroom exhaust fan ducting system?
BEST ANSWER: Yes, I suppose you could, but I am not sure why would want to. Most bathroom plumbing is 3” and metal fittings from a home store are MUCH less expensive.
- Reply(1)
- Inaccurate
- William H on Oct 25, 2017
- Purchased on Oct 26, 2015
I have a dewalt thickness planer, I need a 45 or 90 degree elbow, the port coming out of the planer is 4 inch outside, what do you have? ray
BEST ANSWER: I have this elbow but the swivel one and the dust tight handle. Works like a charm but had to build a small support because the elbow and the handle plus the hose weight is pretty heavy and I was afraid it would break off the outlet fitting of the Dewalt.
- Reply
- Inaccurate
- Michel P on Mar 12, 2017
I have built a dust collector with a 35 gal plastic drum that I got from the local car wash. I use part 34367 for the connectors, I would like to know if this 4" quick connect elbow port will connect and keep the hoses from kinking?
BEST ANSWER: It will direct the hose in the direction it's aimed. Rockler does have another fitting that will rotate to keep the hose from twisting
- Reply
- Inaccurate
- Dennis W on Feb 2, 2016
- Purchased on Mar 11, 2015
What is the distance from the top of the female end with the fittings to the bottom of the elbow? My table saw has a leg bar 5 inches below the dust port and I need to know if this will fit. Thanks
Will this attach to the Dust Right Combo Port?
what is the i.d. of this adapter/elbow ?
Will the Rockler Dust Right® Quick Connect 4'' Elbow fit a 4-7/8" fan inlet?
Frequently Bought Together
More Suggestions