$39.99 Each
In stock
Incredible expanding hose with flexible ports lets you use dust collection with nearly any handheld power tool.

Dust Right Universal Small Port Hose Kit

Item #
48212
Rating:
78% of 100
Dust Right® Universal Small Port Hose Kit Dust Right Universal Small Port Hose Kit Dust Right Universal Small Port Hose Kit Dust Right Universal Small Port Hose Kit Award Winning Small Port Hose Kit Dust Right Universal Small Port Hose Kit Dust Right Universal Small Port Hose Kit Dust Right Universal Small Port Hose Kit Dust Right Universal Small Port Hose Kit Dust Right Universal Small Port Hose Kit Dust Right Universal Small Port Hose Kit Review | Rock-n H Woodshop Dust Right Universal Small Port Hose Kit Demo | Glass Impressions Dust Right Universal Small Port Hose Kit
Dust Right Universal Small Port Hose Kit

Handheld power tools generate a lot of dust right where you least want it: directly under your nose. Unfortunately, the confusing array of non-standardized dust ports on handheld tools makes it hard to connect a dust hose—until now. This new kit from Rockler includes two sizes of flexible rubber dust ports—1'', 1-1/2'' ID —that flex to fit on almost any tool, plus a 2-1/4'' port that connects to most shop vacuums, dust separators or our optional Cord and Hose Holder (#47321, sold separately). The two tool-end ports are thoughtfully designed with a slight elbow that helps lift the dust hose off of your work. All ports thread securely into the included premium ''stretch'' hose, which is a remarkable engineering feat in itself. This supple, agile hose expands from a mere 3' to nearly 15' long, and is a pleasure to work with, providing almost zero resistance as you move about your workspace.


Features:
  • Winner of WOOD Magazine's Innov8 Award for 2015
  • Ports flex to fit almost any handheld power tool with dust collection compatibility
  • Hose expands 5x the original length—from 3' to 15'— for a large working radius
  • Durable, flexible rubber hose is easy to manuever and manipulate, is kink- and crush-resistant, and has no memory
  • Ports swivel for free range of motion
  • Ports reverse thread into hose for a secure, leak-free connection
(1) Expandable 1-1/2'' ID Dust Hose
(1) 2-1/4'' OD Swiveling Port
(1) 1'' ID Swiveling Rubber Dust Port
(1) 1-1/2'' ID Swiveling Rubber Dust Port
More Information
Brand Dust Right
Weight 2.6000
Tech Spec
  • Patent Pending
Technical Documents
Material Rubber
Type Component Kit
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

Prop 65 WarningWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
3.9 / 5.0
1,759 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
834
393
243
168
121
Dust Right Universal Small Port Hose Kit
This kit easily solved the problem of getting dust collection onto my DeWalt DW621 plunge router. The adaptability of this kit is great.
April 19, 2019
Purchased
5 months ago
Woodworking Experience:
Beginner
Great flexibility!
Great hose! Love the flexibility! It’s quite heavy, but the flexibility is a huge plus. Using it with a Festool TS 55 track saw and 9 gallon Rigid shop vac. All fittings fit well.
April 19, 2019
Purchased
1 month ago
Woodworking Experience:
Intermediate
Great gadget
Works perfectly
April 16, 2019
Purchased
1 month ago
Woodworking Experience:
Advanced
A real sucker!
These fit almost all my tools and work great! My belt sander is an odd ball though. I can clean its bag with these and NOT miss a grain of dust.
April 11, 2019
Purchased
2 months ago
Woodworking Experience:
Advanced
Excellent product
I bought this for my random orbit sander and trim router. It fit both items. Worked as advertised. Very satisfied.would recommend product
April 10, 2019
Purchased
1 month ago
Woodworking Experience:
Intermediate
Works great, nicely made.
Also bought the two auxiliary ports and have hooked it up to every tool I've tried so far. Great Product.
Used a piece of 2-1/4" ID hose to attach the Dust right coupler to the end of my existing vac hose.
Used a piece of 2-1/4" ID hose to attach the Dust right coupler to the end of my existing vac hose.
April 9, 2019
Easy way to hook up tools
Great for adapting to different tools to shop vac
April 6, 2019
Purchased
11 months ago
Woodworking Experience:
Advanced
Excellent small port kit
This universal dust small port hose kit has changed my experience with sanding and using my track saw. It fits most of my smaller tools and provides a excellent fit and containment for the dust
User submitted image
Added Apr 5, 2019
April 5, 2019
Purchased
1 month ago
Woodworking Experience:
Beginner
This is an awesome product. I've been searching for connectors for some of my hand held power tools and could not find any. These work perfect on my old belt sander, orbital sander and miter saw. Great product
April 4, 2019
Purchased
1 month ago
Woodworking Experience:
Intermediate
Dust right universal Small port hose kit!
The long hose makes it very adaptable!
April 4, 2019
Purchased
2 months ago
Woodworking Experience:
Advanced
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 117 questions Browse 117 questions and 239 answers
Why did you choose this?
Rockler Store
Many small tools with various hose connections
Nicholas S on Apr 23, 2019
Trying new things see how its works
cuong v on Apr 7, 2019
Many small tools with various hose connections
Nicholas S on Apr 23, 2019
If it works, it's a godsend.
greatUnknown on Apr 14, 2019
Trying new things see how its works
cuong v on Apr 7, 2019
same as above
Merland R on Apr 6, 2019
Vacuum ports are a headache. This seems like a great idea.
Stephen H on Apr 5, 2019
Just what I needed- too much $$
P W on Mar 29, 2019
Adaptability
Carrie M DeBlieck M on Mar 25, 2019
I needed a smaller connection for sanders and my router.
Robert R on Mar 14, 2019
Need a longer hose for shop vac.
norman m on Mar 13, 2019
I was looking thru the magazine and I said wow this is just what I need it's ideal for a small shop, Thanks.
John H on Mar 7, 2019
Practicality
DANIEL R on Mar 5, 2019
Great product for my 30 years of hand tools that have all different ports.
Denis K on Feb 28, 2019
To fill a need in my shop. The bags that come with most of my handheld power tools are not effective - I'm hoping together with the small port hose kit it will solve the issue
Raymond B on Feb 28, 2019
Was told it will fit the Fein unit...
Alden S on Feb 28, 2019
I needed them . . . .at least that's what I told my wife!
PHILLIP S on Feb 27, 2019
Have multiple small tools that need to be attached to a vac.
Paul K on Feb 27, 2019
Needed for my small power tools.
Michael S on Feb 27, 2019
needed something that fits everything small so that I do not have to worry about fittings for each tool.
Kim K on Feb 26, 2019
I've already purchased one for a few tools, worked great, plan to add to other tools.
Ed F on Feb 25, 2019
Tired of using a car detailing kit and hose clamp on the palm sander and other various small tools.
Jason H on Feb 24, 2019
As a long time customer of Rockler I purchased this product to use with my new track saw
Joe A on Feb 24, 2019
To fit small things like orbital sander, hand planner and items like these.
BRENT H on Feb 23, 2019
Sawdust
Lawrence M on Feb 22, 2019
Because of the adaptability to all of my handheld tools
Heather G on Feb 22, 2019
Frustration with small tool ports not fitting my shop vac
Bob M on Feb 22, 2019
Have one of these now and it works awesome.
Hamlover on Feb 21, 2019
I am tired of making duck tape connections.
Wayne A on Feb 21, 2019
The problem is real. I hope it works
Gilbert D on Feb 21, 2019
Needed a good option for my random orbital sander.
Shawn K on Feb 21, 2019
My tools have different size ports.
Alfred G on Feb 20, 2019
To fit Delta CRUZER miter saw and other tools in my shop
Michael A on Feb 20, 2019
Great idea for small tools such as sanders and miter saws. The flexible fitting and expand hose will work great in the shop
James S on Feb 20, 2019
universal
ASHER H on Feb 20, 2019
I like the way it works and I was looking for at this time
Ray M on Feb 20, 2019
The collapsible and space saving ability for a small shop...
JASON E on Feb 19, 2019
Some of my tools have square exit ports, appears these will fit over them.
Joe B on Feb 19, 2019
Keep shop cleaner
mike m on Feb 18, 2019
For my track saw and sander.
John L on Feb 18, 2019
for my health
Lester T on Feb 18, 2019
My newest orbital sander does not offer an adapter for connecting standard hoses and this will solve that problem plus I like the idea of the lighter hose.
Fred J F on Feb 18, 2019
I need it
Mariano S on Feb 18, 2019
It was on sale and has good reviews
K E on Feb 18, 2019
Recommended by a friend as being flexible enough for my needs.
Alexander R on Feb 17, 2019
I have tried several hose connectors and none were very useful. I hope this works. I’ll write back when I receive it.
Barry N on Feb 17, 2019
Have one kit, and small port adapters fit many things. When I use 2 sanders (oscillating circular and square for inside corners), it's too time consuming to switch the small ports on the hose end through multiple finish grades. With a 2nd kit, I can leave one attached to each sander, and change it at the vacuum port end.
Vince on Feb 17, 2019
Hoping it'll fit my Festool track saw and other power hand tools.
Jason N on Feb 16, 2019
Found these on sale. Additions to other set. Savings helped ridiculous freight charges to AK.
Charles H on Feb 15, 2019
saw a YouTube video and liked it
Paullus J on Feb 15, 2019
Price and functionality
JOSH L on Feb 14, 2019
I plan to use this for my compound miter saw and several sanders and routers.
Nelson C on Feb 14, 2019
If it works, it's a godsend.
greatUnknown on Apr 14, 2019
same as above
Merland R on Apr 6, 2019
I need to Connect my Dust Right Universal Small port hose to the end of this Dust Right shopvac hose but don't see a connector?
CPRjr on Apr 16, 2017
Dust Right Universal Small Port Hose Kit
Dust Right Universal Small Port Hose Kit
Dust Right® Heavy-Duty Shop Vacuum Hoses
Dust Right® Heavy-Duty Shop Vacuum Hoses
BEST ANSWER: I bought this hose to do the same thing today. The universal ends will friction fit into the blue hose but won’t thread. They are too small. The fit is ok but you will probably need to add some tape to make it thick enough to hold. On a side note, the small end that comes with the blue hose has a rubber tip and actually fits snuggly on all of the tools I’ve tried so far. So I may just use it and skip using the universal end.
Has anyone tried this set with a Mirka CEROS sander? Will anything fit?
Ron on May 1, 2015
BEST ANSWER: The small green festool hose fits it perfect.
Does this set fit the 1 - 1/2'' hoze included in the Dust Right® Universal Small Port Hose Kit (Item #48212) ?
Alexandre G on Dec 15, 2017
Dust Right Universal Small Port Hose Kit
Dust Right Universal Small Port Hose Kit
Heavy-Duty Shop Vacuum Accessory Kit
Heavy-Duty Shop Vacuum Accessory Kit
BEST ANSWER: Yes, 48212 will fit onto the wand ends of this kit.
How do I connect my Dust Right Universal Small Hose Kit to my 4" system?

I purchased the Small Hose Kit to connect up to my Dewalt Drop Saw to my Jet Dust Extraction, but am missing a connector to get from the 2 1/4 OD of the Small Hose Kit to the 4" on the Jet, or even the Quick Change Handle. Any advice greatly appreciated.
Nick S on Oct 8, 2017
Dust Right Universal Small Port Hose Kit
Dust Right Universal Small Port Hose Kit
DeWALT DW716 Heavy-Duty 12'' (305mm) Double-Bevel Compound Miter Saw
DeWALT DW716 Heavy-Duty 12'' (305mm) Double-Bevel Compound Miter Saw
Jet® Vortex Dust Collector 1.5HP w/Bag Filter
Jet® Vortex Dust Collector 1.5HP w/Bag Filter
Dust Right® 4'' Quick Change Tool Set
Dust Right® 4'' Quick Change Tool Set
Are individual components of Dust Right® Universal Small Port Hose Kit Item #: 48212 available for purchase, separately?
Bob M on Oct 1, 2015
BEST ANSWER: The 3 ports are available together for $19.99 plus handling through our customer care team at 800-376-7856 by requesting item #56413.
Will this fit my DW621 dust port?
Raymond on Apr 18, 2015
BEST ANSWER: this product comes with two dust ports, one 1" and one that is 1-1/2". These two port are flexible so if your router port is close to that, it should work
Will these hose adapters fit the non standard Triton MOF001 router dust port?
Dan J on Feb 13, 2016
Dust Right Universal Small Port Hose Kit
Dust Right Universal Small Port Hose Kit
Triton MOF001 2-1/4 HP Dual-Mode Plunge Router
Triton MOF001 2-1/4 HP Dual-Mode Plunge Router
BEST ANSWER: They will fit anything with a little force and a couple zip ties.
I would like to use this sander with Rocker's new universal small port hose kit. Are they compatible with each other?
A shopper on May 22, 2015
Dust Right Universal Small Port Hose Kit
Dust Right Universal Small Port Hose Kit
Porter-Cable® 382, 5'' Random Orbit Sander
Porter-Cable® 382, 5'' Random Orbit Sander
BEST ANSWER: Yes
will this fit makita BO5030 sander and will the it connect to a bosch gas20l hoover? thanks peter
Pawman on May 11, 2016
will your hose connect with a festool CT36 ?
A shopper on Apr 29, 2015
BEST ANSWER: It connects great to my 1400 router and Bosch jigsaw and sander (all 35mm I believe) Also fits great on my Craftsman miter saw port ... Craftsman is known for going way left field of any type of standard...
Instead of using a shop vac, can I use a reducer on my 4 inch dust collector?
Frank on Mar 11, 2018
"The 2-1/2'' ports are also compatible with our Universal Small Port Hose Kit". Can you clarify how? I would love to connect two of my 1.5" hoses to this.
Eric G on Aug 27, 2018
Dust Right Universal Small Port Hose Kit
Dust Right Universal Small Port Hose Kit
Rockler 4'' to 2-1/2'' Dust Collection Y-Connector
Rockler 4'' to 2-1/2'' Dust Collection Y-Connector
Can this hose be used for wet pickup?
Jack on May 28, 2015
BEST ANSWER: I can't think of a reason why you couldn't. It's largely made of flexible rubber and plastic and seals up well enough. Be aware when you buy this product that it won't work with EVERYTHING. I have a variety of power tools and it works with some but not all. (It also won't work with a Dust Deputy, for example.)
Will this fit the Triton plunge routers with a built in 38mm (1-1/2") dust port I.D.?
Guest on Jul 5, 2015
BEST ANSWER: Richard, after looking at the Triton plunge router, the dust collection hose fits into the guard. So, without attaching the dust ports and just using the hose end, it may work. If, not, you may have to find a piece of, say PVC, that will have an 1-1/2" O.D. then you can use the 1-1/2" swiveling dust port. Worth a try if nothing else has worked.
Will this connect to my Fein shop vac?
A shopper on May 22, 2015
BEST ANSWER: It fits my Fein Turbo II perfectly.
Will it fit a dust deputy?
A shopper on May 17, 2015
BEST ANSWER: Out of the box this does not fit a Dust Deputy. The ID of the 2-1/4" swiveling port is 1-3/4" and the OD of the Dust Deputy inlet port at the tip is 1-7/8". However the wall thickness of the of 2-1/4" swiveling port is 3/16" . After a little quality time with a drum sander and a knife I was able to enlarge the ID if the swiveling port to a little under 2"and now IT FITS GREAT.
What adapters are needed to make this work with the 4" Dust Right system?
Jason W on Jun 4, 2015
Dust Right Universal Small Port Hose Kit
Dust Right Universal Small Port Hose Kit
Rockler Dust Right® Master System
Rockler Dust Right® Master System
Rockler Dust Right® Handle
Rockler Dust Right® Handle
BEST ANSWER: No adapters needed if you already have dust right pieces. It's all made to fit together and works well.
Do you sell an additional 2 1/4 OD swiveling port? I need one on each end for my random orbiting sander.
Erwin G on Nov 29, 2016
BEST ANSWER: The swiveling hose end that connects to the shop vac is 2.25" OD.
Will the adapter ends screw into a standard Festool anti-static hose?
Michael V on May 17, 2015
BEST ANSWER: I have the Festool Dust extractor and the Rockler Product you are asking about. The short answer is that the screw adapter ends do not fit onto the end of the anti stat tubing I received with my Festool Dust Extractor. However the black antistat tubing provided with the Rockler product does fit nicely over the connection at the end of my Festool Dust extractor hose. It makes a very tight connection. It would mean that you would have to use both hoses, the Festool and Rockler, but it works very well.

Hope that helps.

Larry
2 1/4 od swiveling port do you sell individual?
Anuar on May 16, 2018
BEST ANSWER: Sorry, at this time we do not
Will this fit my Makita BO5014k random orbit sander?
Ross M on Jul 17, 2015
BEST ANSWER: I bought it specifically for my Makita random orbit sander, and it does not fit the hose adapter.
Will this fit the Shopsmith 3300 vacuum system?
Edward D on Jul 15, 2015
BEST ANSWER: Yes, I attached this hose kit to my Shopsmith 3300. It will plug directly into the vacuum or thru a std hose coupler.
Will this fit a Ridgid 5" random ordit sander?
A shopper on May 29, 2015
BEST ANSWER: Since your sander has a 1 1/4" vacuum port, it should fit, loosely. So you may have to build up the port on your sander for it to fit more snuggly. I have the 1 1/2" dust port on my Craftsman Belt & Disk sander and it works well, as the port is smaller than the 1 1/2" and it fits loose but does work. I do enjoy this product and it has come in handy. Hope this helps.
Will this fit my Bosch miter saw dust port?
Steve F on Feb 6, 2019
BEST ANSWER: It did not fit my Porter Cable random sander, but duct tape saved the purchase.
Seems Impossible get a straight answer on if this kit will properly interface with the Triton Routers.... what gives? Rockler sells both products, seems like there would be less uncertainty about this obvious question.
Nick T on Sep 23, 2018
BEST ANSWER: Even though the OD of the blue portion of the hose is about 37.5mm and the opening on the router is 38mm, the threads on the inlet stop the blue piece at less than 1.2" in. So it would not be totally secure unless you added a 3D printed part or a piece of tape wrapped around the hose. I have 4 routers and use it this kit on all of them. But I have pieces from vacs I have owned over the years and got real good a rigging stuff to make it work.
Will the larger fitting work with the DWE7491RS 2.5 O.D. port table saw?
JUNIOR C on Dec 14, 2017
BEST ANSWER: No. You will need a larger hose that will accept larger adapters for that.
Does it fit the kreg pocket hole jig?
Mark O on Dec 10, 2015
BEST ANSWER: Yes it does. I use it all the time with mine. The hose w/o attachment fits perfectly. Really helps when drilling multiple holes

Happy Holiday

Larry
will this work with triton 3.5 hp routers ?
A shopper on Sep 3, 2015
BEST ANSWER: My triton router the 1.5 hose fits inside the port. This kit is designed to go over the port so it is fit based on an o.d. Not the I.d. Like my triton router base so I would have to say that it is unlikely to work. As heavy as the hose is I am not sure I would want to connect it to my router from a balance issue.
Does the 2-1/4 OD end on the Dust Right Universal Small Port Fitting fit inside the flanged end of this fitting?
Mike W on Jul 21, 2015
Dust Right Universal Small Port Hose Kit
Dust Right Universal Small Port Hose Kit
Rockler 2-1/2'' Dust Port
Rockler 2-1/2'' Dust Port
BEST ANSWER: Yes it does. My shop vac has 2-1/4 end that fits inside end opposite flange end.
will this fit a rigid model WD4070 shop vac?
Nancy S on Jun 14, 2015
BEST ANSWER: Providing the main port on the vac has a 2-1/4 ID then it will work
More Suggestions