VIEW
GRP1358_1
In stock
These 3/8" diameter face grain plugs blend naturally with woodwork by absorbing stain more consistently. Made from select, kiln-dried stock in birch or oak. Easy to install with wood glue!
(1) 50-Pack of 3/8" Face Grain Plugs
| Brand | No |
|---|---|
| Manufacturer Part Number | No |
| Weight | 0.0400 |
| Tech Spec |
|
| Tech Docs | No |
| Length | No |
| Thickness | No |
| Width | No |
| Species | No |
| Collection | No |
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.govWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
4.5 / 5.0
10 Reviews
Oak Face Grain Plugs
I'm very new to wood working and took on an oak dremel cabinet for my first hard wood project. These plugs really hid the screw holes well, sanded smooth, blended into the face grain better then I expected, and stained with polycrylic came out very nice. Can you tell its a plug? Yes, if you know where to look.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Perfect Fit
Very reasonably priced grain plugs that were a perfect fit. The quality is outstanding. Used them covering counter sunk screws on side rail slat holders and the top trim pieces on the foot and headboards.
A great purchase for a beautiful finish.
A great purchase for a beautiful finish.
Counter sunk screws used on side rails perfect fit using the grain plugs to cover screws.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Quality Plugs
.I used these face grain oak plugs when installing oak treads on a new staircase. They matched perfectly after staining.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
good product
I used these plugs to cover screw holes in a room that I had lined with sheets of Siberian birch ply. My plug cutter was metric, and so the holes were 10mm wide, and generally these plugs worked very well. Because of their taper, I was able to reduce their thickness on a belt sander if they felt too loose in the holes. About half matched the lightness of the birch in the ply perfectly, and the remainder were darker, so I used these for the less exposed parts of the room. Overall, this product saved me hours of labor. The number of duds in the packs was impressively low. I would happily endorse them.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
nice ly finished pugs
Build Mission style furiture and they work great
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
I also received mixed end and...
I also received mixed end and face grain packages, someone mixed the products, they were replaced with the correct product No Charge. I purchased three additional packages to allow selecting the grain and color to match the wood where used, excellent quality product.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
June 13, 2011
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
Valet Vintner
These plugs worked as expected. The project use quarter sawn white oak and I assume the plugs were red oak. If I do another project like this I will try cutting my own plugs to attempt to get color and grain closer.
Valet Vintner
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
3/8 inch face grain oak plugs
The only problem I have with them is that they are not uniform in size . But other then that . They are great . I just wish that they were more uniform in size
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
I received 2 packages of 3/8...
I received 2 packages of 3/8 oak facegrain plugs. I opened them to use to cover screw holes on custom steps. I found 60% to be end grain and not useable in this project. Both packages were this way. I contacted customer service, and they were very willingto either issue me a credit or refund. I willuse them on another project anyway. They checked with the closest store about 120 miles away and they had 3 in stock. I picked them up and found they were all facegrain. By the way the clerk in the store was a young woman that was very knowlegable and understood my issue. Thanks for a great company.
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
May 18, 2011
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question
Browse 1 question
and 25 answers
Frequently Bought Together
More Suggestions