Store Locator

Get Expert Advice

Return Policy

Rockler Silicone Mini Glue Brush, 2-Pack

Get pin-point gluing precision, effortless cleanup, and indefinite reusability with the Mini Silicone Glue Brush from Rockler.
Item #
45495
Rating:
88% of 100

No more throwing away countless acid brushes - this brush cleans up with a quick rinse under a faucet, or simply leave it to dry, and the glue peels off, leaving the bristles perfectly intact. The miniature 3/8" brush tip is ideal for crafts and detail work like reaching into finger joints, dovetails, and for spreading glue on narrow stock. Use the 1/8"dropper tip to dispense the perfect amount of glue into dowel holes, mortises, or onto small moldings, all with minimal squeeze-out. Brush has flexible silicone tips with rigid plastic shaft.

Note: Not for use with CA glue.

(2) Rockler Mini Silicone Glue Brushes
More Information
Brand Rockler
Weight 0.0500
Tech Spec
  • Length: 5-3/4"
  • Brush tip measurements: 3/8" in diameter x 3/8" long
  • Angled bristles for cutting in
  • Tip diameter: 1/8" widening to approximately 3/8" at the base
  • Dropper tip length: 3/4"
  • Not safe for food use
Bristle Type Silicone
4.4 / 5.0
158 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
111
17
19
5
6
Glue applicators
I really like mine. They help me in tight spaces. These were purchased for my son who is just getting started.
June 4, 2020
Purchased
1 month ago
Woodworking Experience:
Advanced
Great for narrow edge gluing
Will come handy
May 24, 2020
Purchased
1 month ago
Woodworking Experience:
Intermediate
Very happy!
May 23, 2020
Purchased
2 months ago
Woodworking Experience:
Intermediate
mini brushes
i work with small pieces in my segmented turning and this brush allows me to put the glue where i need it without trouble or excess as a large brush would.
May 22, 2020
Purchased
1 month ago
Does what it says
May 14, 2020
Purchased
2 months ago
Woodworking Experience:
Advanced
Good tool
These are very good additions to your gluing of projects. They allow you to work in tight places and with small cuts. And they clean up as designed ready then for the next project.
April 27, 2020
Purchased
2 months ago
Woodworking Experience:
Intermediate
A nice addition to my glue spreading Arsenal.
I have a larger Rockler silicone glue brush and like it especially for spreading glue on larger surfaces. I regularly forget to get my brush cleaned up after a glue up and appreciate the option of peeling off the dried glue instead of throwing another brush away. These mini glue brushes have been handy for gluing screw hole plugs in place especially using the tapered end.
April 26, 2020
Purchased
2 months ago
Woodworking Experience:
Advanced
Great tool
Gluing up segments for segmented bowl, it is just the tool to get the glue on the segments easily and without a lot of mess
April 15, 2020
Purchased
2 months ago
Woodworking Experience:
Advanced
Gluing made easy!
These replace acid brushes or other brushes quite nicely. It's hard to get glue that has dried on fiber brushes but it's a piece of cake to peel the dried glue off these things.
April 10, 2020
Purchased
2 months ago
Woodworking Experience:
Intermediate
Good
Much better than trying to pore some glue down a dowel hole.
April 6, 2020
Purchased
2 months ago
Woodworking Experience:
Intermediate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions Browse 4 questions and 57 answers
Why did you choose this?
Rockler Store
These look like they will work well to put glue into some holes for dowels to then be inserted.
Evelyn V on Jun 6, 2020
Necessary
George R on May 22, 2020
These look like they will work well to put glue into some holes for dowels to then be inserted.
Evelyn V on Jun 6, 2020
I needed it because they work
Woodsman Axe R on Jun 3, 2020
Necessary
George R on May 22, 2020
because I needed it
Michael F on May 18, 2020
Works well
William M on May 17, 2020
New to me. Looks to be reusable.
Jason Carter M on May 16, 2020
liked the full size glue brush but wanted smaller brushes for box joints and other small joinery
Cody G on May 15, 2020
I started using these a few months ago and one I started using them I quit using the metal handled brushs. These work extremely well.
Timothy Z on May 14, 2020
Sometimes a big brush is to much!
Charles H on May 8, 2020
Tight spots
stan v on May 4, 2020
My wife loves to borrow these
Karl B on Apr 27, 2020
great for gluing up small projects and clean up is<br /> a breeze
Morgan B on Apr 26, 2020
Easy to apply small quantities of glue without dripping.
Antonio R on Apr 26, 2020
Perfect ford mortise and tennant joining.
Phil K on Apr 26, 2020
All wood isn’t the same size in every application. I can use my finger, but splinters can still happen.
Wes on Apr 24, 2020
i'm tired of using my hands, like the fact it is reusable and has easy cleanup
Matt M on Apr 24, 2020
Will use this mainly for refurbishing projects to get to loose or separated boards
Brick W B on Apr 24, 2020
I like the larger brush I purchased earlier (Easy Cleanup) so purchased these for smaller projects.
Jeff L on Apr 22, 2020
make glue up cleaning easier.
Lawrence D on Apr 21, 2020
Genius product!
Adam D on Apr 21, 2020
To compliment the Rockler Glue Keeper I just purchased
Joel H on Apr 19, 2020
The micro glue brush set worked so well, that I thought this would too.
Thomas E on Apr 17, 2020
reputation & cleanup
Linda M on Apr 16, 2020
use a glue brush and wanted to try this for dowel holes
dale h on Apr 11, 2020
Hope to start doing more biscuit glue ups and have already found what a messy process it can be to get the glue where you want it and not where you don’t.
Doug L on Apr 11, 2020
replacing the old acid brushes
Milton M on Apr 9, 2020
Heard alot of good things about them. Acid brushes are getting old
Ronald R on Apr 9, 2020
great for glue and easy cleanup
JAMES C on Apr 9, 2020
Previous glue applicators purchased from Rockler work well so thought I'd add these to my shop.
Santiago N on Apr 8, 2020
Tired of buying the multi packs of glue brushes and only being able to use them for part of a project. Longer life....
Darnell I. on Apr 4, 2020
Shop glue ups
Kevin F on Apr 2, 2020
Handy to have
David T on Mar 30, 2020
I have several projects ready for assembly and these brushes look like they will work for me.
Steven H on Mar 29, 2020
going to give them a try
Rick V on Mar 26, 2020
we are doing a lot of dove tails going to try this
Marie A P on Mar 25, 2020
help with glueing
CLARENCE N on Mar 22, 2020
I have challenges on applying glue to dowel, dovetails, and biscuit joints. Hopefully it will help me with the mess i always create.
Will on Mar 12, 2020
Just trying it out.
Brian B on Mar 10, 2020
reusable
Bob T on Mar 8, 2020
to use in small areas
Laura W on Feb 29, 2020
convenience
Tom L on Feb 29, 2020
Glue will come off after it drys
Andy N on Feb 29, 2020
Seems helpful when gluing up mortise and tenons.
Diane H on Feb 10, 2020
Willing to try
Bruce R on Feb 9, 2020
don't have one
jim on Feb 1, 2020
I need to do small glue ups.
William J on Jan 31, 2020
SALE PRICE
larry j on Jan 27, 2020
Right Size
Jeffrey S on Jan 27, 2020
Tired of using my finger
J B on Jan 25, 2020
"Shop uses, glue ups, & projects"
Sam Bullard on Jan 24, 2020
I needed it because they work
Woodsman Axe R on Jun 3, 2020
because I needed it
Michael F on May 18, 2020
can I use this silicone brush with Gorilla Glue?
Roy B on Oct 19, 2016
BEST ANSWER: I use gorilla wood glue and have no problems with the brush.
Can I use this brush for silicone glue (GE Silicone II), for a rubber glue (Lexel) and for an epoxy glue?
Anita D on Sep 2, 2015
BEST ANSWER: I've used if for Epoxy with no problem. I've also used it for things such as shoe-goo adhesive. I would imaging that it would work with silicone glues, but I've never tried it. I guess there is a small chance that the silicone in the glue might react with the silicone in the brush, but I'd still give it a try.
Can you use these Silicone mini glue brushes for liquid acid flux when soldering. Thanks TW ?
Tim W on May 1, 2019
BEST ANSWER: I don't know if the silicon will hold up to the acid, but regardless these are pretty big. Think pencil eraser size. So if the solder jobs are battery cables or large caning for stained glass they would work.
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov