$94.97 Each
In stock

Freud® 10" x 80T Industrial Double Sided Laminate/Melamine Saw Saw Blade - LU97M010

Item #
49195
Rating:
100% of 100

Designed to give long life and excellent finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needed with this blade!


Features:
  • The Silver I.C.E.™ (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor
  • Also available with the premium Perma-SHIELD® coating
  • Triple Chip Grind (TCG) tooth design offers longer life when cutting abrasive manmade materials
  • Laser-cut anti-vibration slots drastically reduce vibration and sideways movement in the cut - extending blade life, and giving a crisp, swirl-free flawless finish
  • Silver I.C.E.™ (Industrial Cooling Element) Coating is a revolutionary coating that resists corrosion and resin or "pitch" build-up and resists heat up to 2 times longer than standard polished blades
  • Features Ti-Co™ Hi-Density Carbide Laminate Blend for maximum performance
(1) Freud Industrial LU97M Double Sided Laminate/Melamine Saw Blade
More Information
Brand Freud
Manufacturer Part Number LU97M010
Weight 2.0000
Tech Spec
  • Anti-vibration design
Tech Docs N/A
Kerf Width 0.126"
Saw Blade Diameter 10"
Material Cutting Chipboard, Laminate, Melamine, Plywood, Wood
Number of Teeth 80
5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Amazed!
Truly amazed by the quality of this blade. I've cut plywood and acrylic sheets with this blade. I've had it for almost two years and I still haven't had to sharpen it. Great buy!
March 14, 2017
Purchased
over 3 years ago
I've searched for over 15 years...
I've searched for over 15 years and bought many $100+ blades, looking for a decent melamine blade. This blade cuts 2 sided MDL (melamine) as close to perfect as I've ever seen. I am also surprised at how quiet it is too. This is the best blade for melamine I have EVER seen. I've been setting the blade height so that the entire tooth just clears the top of the wood. It works so great, I don't want to mess with raising it higher. If you're tired of the back side of your melamine chipping out, this blade is the ticket.
April 17, 2013
I received my new Freud 80-tooth...
I received my new Freud 80-tooth Laminate/Melamine Saw Blade last week and put it right to work cutting 3/4" melamine sheets into shelves for a pantry/laundry room remodel. Powered by my Delta contractor saw, this blade went through the melamine effortlessly and with zero chipping. It left such a smooth edge that I was able to iron on melamine edge banding without even sanding! Before replacing the blade with my normal combination blade, I used it to cross-cut some birch plywood and was impressed with how little tear-out there was in the cut. I got this blade in a Rockler half-price sale, which made this purchase even smarter!
March 6, 2013
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 2 answers
Why did you choose this?
Rockler Store
We cut a ton of melamine and so a top quality melamine blade was a must! We purchased a zero clearance insert plate also to reduce if not eliminate chipping on the bottom side.
Closet F on Jul 10, 2017
We cut a ton of melamine and so a top quality melamine blade was a must! We purchased a zero clearance insert plate also to reduce if not eliminate chipping on the bottom side.
Closet F on Jul 10, 2017
My recent experiences with Frued router bits made me very happy. I needed a new Melamine blade.
phil s on Dec 4, 2016
My recent experiences with Frued router bits made me very happy. I needed a new Melamine blade.
phil s on Dec 4, 2016
Will this blade fit the Jet 10 inch jobsite table saw?
Eric R on Nov 7, 2016
BEST ANSWER: I would think it should as it is a standard 5/8" arbor, 10" blade. I put it on my Bosch table saw. Great blade.
will this blade do as good on hard woods as well as soft
Howard T on Mar 5, 2016
BEST ANSWER: Yes, good blade for melamine, laminates, veneer hardwood plywood, and soft wood. Chip free. I' built many custom Kitchens professionally.