$129.99 Each
In stock

Incra Miter Gauge 1000

Item #
20350
Rating:
88% of 100

Unbeatable accuracy at an affordable price! Includes solid steel laser-cut protractor head, 18" track fence and sliding stop positioner. Whether it's your basic 90° cut-off, simple pictures frames, complex compound miters, or a 20-sided object, the Miter Gauge 1000 delivers perfect repeatable accuracy every time.


Features:
  • Precision angle indexing teeth are laser cut in solid steel to lock in 41 positive ° range
  • Plus 1/2 ° vernier cursor
  • Special stops at 22-1/2 ° and 67-1/2 °
  • GlideLOCK Miter Bar with six expansion points allows you to adjust both sides of the bar for zero side play, anti-friction travel on all table saws with standard (or near standard) miter gauge channels. This means the bar won't wiggle around in the miter slot
  • With 18" Incra track fence and Incra sliding stop positioner
  • Accurate enough to produce gap-free hairline glue joints on the mitered corners of any multi-sided object without trial-and-error setups
    (1) Incra Miter Gauge 1000
    More Information
    Brand Incra
    Manufacturer Part Number MITER100018T
    Weight 5.9500
    Technical Documents
    Prop 65 WarningWARNING: Cancer and Reproductive Harm. For more information go to www.P65warnings.ca.gov
    4.4 / 5.0
    33 Reviews
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Star
    25
    2
    3
    1
    2
    Excellence product.
    The Incra Miter Gauge-1000 is another great accessory that Rockler sells. It comes dis-assembled but, the concise, and easy to follow, directions let me put it together in a few minutes. I like the ease in making adjustments with and the micro adjustment that allows the operator to correct for a half of a degree. I made several miters and, when I measured them, they were right on. I had made my own out of hard maple, a couple years ago, and it was wearing out. I decided to purchase this instead of making a replacement. I'm sorry I didn't have this available to me at the time I made my original. I would have owned this one at that time and saved a lot of work and had a more consistently accurate miter cuts. I would recommend this everyone who wants a great Miter Gauge that is more than worth the selling price.
    September 2, 2019
    Purchased
    1 month ago
    Woodworking Experience:
    Advanced
    I like it a lot
    I like it a lot
    July 17, 2019
    Purchased
    2 months ago
    Mitre Gauge
    A nice product
    July 12, 2019
    Purchased
    2 months ago
    Woodworking Experience:
    Intermediate
    MG1000
    Another quality product from Incra.
    June 23, 2019
    Purchased
    3 months ago
    nice tool
    This was easy to assemble and set up. My first cuts were perfectly square. I have been frustrated by the miter fences supplied with saws and decided it was time to try something new. This just works!
    June 13, 2019
    Purchased
    3 months ago
    Nice precise tool well worth the investment.
    When you finally get a nice precise tool it brings back the reason that you started woodworking in the beginning. If you are still struggling with the miter guage that came with your machine put the fun back into woodworking again you know that you need it so just do it you won't be sorry this tool works great.
    June 9, 2019
    Purchased
    3 months ago
    Woodworking Experience:
    Intermediate
    Dead on positive lock
    Having positive lock on your miter gauge is a game changer. I went into the store knowing I needed something different and the sales man pointed me to this. It's a great tool. Solid feeling and I'm confident, after getting it assembled that it's dead on.
    Fits great in my contractors table saw track
    Allows for repeatable opposite angles which is perfect for my woodworking style
    March 31, 2019
    Purchased
    6 months ago
    Woodworking Experience:
    Intermediate
    best tool I brought in a long time
    December 26, 2018
    Purchased
    9 months ago
    Woodworking Experience:
    Advanced
    When I bought my new DeWalt job site table saw I held the supplied miter gauge guide in my hand for a moment then slid it into the guide slot. I was shocked at the poor fit and wobbly travel. I instantly knew I was not going to make any straight cuts with that piece of junk. DeWalt tools usually attain to high standards. I wondered how this got into the box. I tossed it out. Incra 1000! Wow cool tool. Go Incra!
    October 3, 2018
    Purchased
    1 year ago
    Woodworking Experience:
    Intermediate
    great
    This item is as I expected, great.
    September 23, 2018
    Purchased
    1 year ago
    Woodworking Experience:
    Advanced
    Start typing your question and we'll check if it was already asked and answered. Learn More
    Browse 9 questions Browse 9 questions and 26 answers
    Why did you choose this?
    Rockler Store
    Needed a miter gauge as the used table saw I bought recently didn't come with one at all. Wanted a good one for some future builds coming up and researched the subject and this one seems to check the important boxes.
    DOUG M on Jul 1, 2019
    Quality product made in USA
    C W on Jun 2, 2019
    Needed a miter gauge as the used table saw I bought recently didn't come with one at all. Wanted a good one for some future builds coming up and researched the subject and this one seems to check the important boxes.
    DOUG M on Jul 1, 2019
    I can clamp pieces to the fence to ensure the pieces do not move during cuts.
    Colton G on Jun 5, 2019
    Quality product made in USA
    C W on Jun 2, 2019
    U-tube and advertisement
    Joseph N on Apr 16, 2019
    I dropped my original equipment miter, which was made from cast aluminum and it broke. Needed a new one.
    Wesley W on Apr 6, 2019
    Great product and excellent service!
    John K on Apr 2, 2019
    Seems to fit my needs.
    John S on Mar 1, 2019
    Good Reviews. I hope it is worth the price.
    Randal E on Jan 6, 2019
    Purchased new tablesaw. Needed good miter gauge to make accurate cuts.
    Austin L on Dec 21, 2018
    Better features, easier adjustment of t-slot slide, competitor has 5 nylon set screws to adjust t-slot slide which are mounted on the side of the slide. Incra has the adjustment of slide on the top, much easier to make adjustments.
    James D on Dec 11, 2018
    I have an old Craftsman Table saw that has the original miter gauge and it has never been real accurate. Now that I have time for more projects needed to upgrade.
    Jeff C on Nov 29, 2018
    needed a good miter gauge
    Steven C on Mar 26, 2018
    It seems to have the features I need and can take slop out of the groove in the saw.
    Kenneth A on Feb 16, 2018
    Need an accurate miter gauge
    Roger on Feb 11, 2018
    The one on my saw could use some improvement. Looks like a quality piece.
    jim m on Jan 26, 2018
    Best Value
    Loy C on Dec 20, 2017
    Reviews were positive and price was very reasonable for the product.
    A M on Aug 11, 2017
    its the only accurate miter gauge available
    NEMER A on Jul 20, 2017
    Good price with free shipping
    ERIC B on Apr 30, 2017
    I needed a better miter gauge than the one that came with my saw. Also I am not a full time woodworker so the price is right for the type of work that I do.
    Dennis P on Apr 29, 2017
    Needed a new miter gauge incra is a very good product.
    John S on Feb 2, 2017
    Great tool
    Philip S on Dec 20, 2016
    Needed a more accurate gauge than the factory supplied tool
    Gerard M on Aug 26, 2016
    I wanted an accurate miter gauge.
    Fred M on Jul 26, 2016
    Didn't need the extension of the SE or HD suffix models but still wanted an aluminum face for sub face and box jig attachment
    Leonard E on Jun 15, 2016
    Wanted an accurate miter for Bosch router table which came without one. Also liked fence.
    John Christian S on May 27, 2016
    great product have it on all table saws
    Charles H on Apr 8, 2016
    Recommended by instructor in table saw class!
    Stuart L on Feb 20, 2016
    eliminate wiggle in track and provide more accurate extension bar
    Michael M on Dec 31, 2015
    good price for needed add-on for my table saw
    Frank W on Dec 2, 2015
    Same as for clamps.
    William K on Nov 23, 2015
    Needed extended MITRE gauge to cut dados
    William K on Oct 9, 2015
    The ability to fine tune the angles with the scale and the attached fence and the cutoff stop that was shown in the video. That combined with the 20 % off was too good to be true.
    Grandpa can fix it on Aug 20, 2015
    table saw use
    David B on May 27, 2015
    I have been making picture frames using the "miter" gauge on my table saw and an old miter box. Neither performed quite as well as I would like so I thought I would splurge and get a really good mitering tool.
    James F on Apr 7, 2015
    I can clamp pieces to the fence to ensure the pieces do not move during cuts.
    Colton G on Jun 5, 2019
    U-tube and advertisement
    Joseph N on Apr 16, 2019
    I have an old bench top table saw....The width of the channel is .63 inches. Will this jig fit?
    allen on Jul 15, 2015
    BEST ANSWER: In short, no. The miter bar is sized for .75" slots (and is just slightly under the nominal .75"). I looked and sure enough none of the documentation actually states that, just that it fits "Standard" miter slots. Guess everyone is just supposed to know that 3/4" slots are the standard.
    i have a sears table saw,will this miter gauge work on it ?
    A shopper on Jul 23, 2015
    BEST ANSWER: I to have a Sears table saw, about 15 years old, and I use it on that saw, so it does work for me.
    does it come with a miter bar? theres not one shown shown. it should have an adjustable miter bar
    tim c on Mar 31, 2019
    BEST ANSWER: Tim - How Strange ! You are correct - the image does not show the miter 'bar" piece.
    The miter gauge DOES have a miter bar - in fact - the handle is attached to the bar.
    The bar and protractor componants are heavy duty, and I think you'll be happy using it.
    Hello, does it work with Delta table saw?
    Victor M on Jun 2, 2015
    BEST ANSWER: If your saw has a 3/4 inch miter slot it will work with or without a T-slot. This miter gauge is very accurate because it fits tight in the slot due to the adjustment rollers.
    Will this fit my craftsman TS with a 5/8" miter slot? Or does Incra sell an "adapter kit" to accommodate the smaller slot?
    mec1117 on May 27, 2017
    BEST ANSWER: No it won't. The slide is 3/4 " and it has adjusters to tighten the slide if the slot is too wide.
    is there provisions for me to clamp the piece to the fence?
    John K on Aug 11, 2019
    BEST ANSWER: As I understand the question the answer is no. The fence runs parallel to the sawblade. The miter gauge runs perpendicular to the sawblade.
    Will the incra 1000 mitre work on an older Craftman table saw?
    Jim D on Apr 20, 2019
    BEST ANSWER: the miter bar did not fit in the slots of the old craftsman table saw I bought used almost 50 years ago. It does however work great on my my new stop saw. It is so handy that if I were to lose it I would replace it right away. The older caftman saws were hard to find after market accessories for because of their slot width.
    Can the mitre bar be removed and replaced with a narrower bar?
    Marengo on Jan 7, 2018
    BEST ANSWER: The bar is attached with screws, so it certainly could be replaced with a different bar - however, said bar would need to be drilled for the same spaced mounting holes.
    well this fit my rigid table saw ?
    douglas zandona on Apr 7, 2017
    BEST ANSWER: yes , it has adjustable poinst to fit standard miter channels.