$79.99 Each
In stock

Incra Miter Gauge V27

Item #
29008
Rating:
96% of 100

Compact size makes this the most affordable Incra miter gauge ever! Engineered to provide high performance for your table saw, band saw, router table, disk sander, belt sander or any other tool in need of a better miter gauge.


Features:
  • Exclusive AngleLock indexing system
  • Adjustable GlideLock miter bar with four expansion points adjust for zero side play
  • Twenty-seven laser cut pre-sets for perfect angles in 5° increments over a full 120° range
  • Universal mounting bracket will support any user-made fence as well as any Incra fence
(1) Incra Miter Gauge V27
(1) Universal mounting bracket
(1) T-clip
More Information
Brand Incra
Manufacturer Part Number MITERV27
Weight 2.9000
Tech Spec
  • For use in any standard 3/4" x 3/8" miter slot
  • 27 positive angle stops in 5° increments (+/- 60° range) and special stops at +/- 22-1/2°
Technical Documents
Prop 65 WarningWARNING: Cancer and Reproductive Harm. For more information go to www.P65warnings.ca.gov
Prop 65 Warning WARNINGDrilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. www.P65Warnings.ca.gov/wood.
4.8 / 5.0
33 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
29
2
2
0
0
I have a table which is too small to get the full benefit from this product, but it works well with what I have. Check your blade alignment when you set this up.
June 30, 2019
Purchased
3 months ago
Woodworking Experience:
Intermediate
This is the most accurate Miter Gauge I have ever see. And the settings for different degrees are the easiest I have ever seen in a miter gauge. I love it.
June 24, 2019
Purchased
3 months ago
Woodworking Experience:
Beginner
Great
For my shop purposes, it doesn't get very heave use but is super reliable when I need it. I use it with a DEWALT table saw. It fits and tightens up nicely. One of the screws was a bit too hard to tighten down that the bit started twisting but with the other ones tightened up nicely it fits snug. Love it. Way better than the plastic finicky one that came with the saw. I waited way too long to purchase this upgrade...
April 25, 2019
Purchased
5 months ago
Woodworking Experience:
Intermediate
Was a little skeptical
Purchased this for my older (late 50's) Delta uni-saw - fit like a glove, easy to adjust in miter slot, holds true, heavy duty, very easy to set up with adjusting screws for tilt and angle that hold after adjusting
March 30, 2019
Purchased
7 months ago
Woodworking Experience:
Intermediate
good product
I like all the degree stops.Makes work to be cut more accurate and reproduceable.
February 14, 2019
Purchased
7 months ago
Woodworking Experience:
Advanced
Good product
Pricy for a product that has been around for awhile.
February 9, 2019
Purchased
7 months ago
Woodworking Experience:
Advanced
Incra Miter Gauge V27
Very well made and sturdy. Well calibrated and accurate,I would highly recommend it to any one considering it.!!!
January 30, 2019
Purchased
8 months ago
Woodworking Experience:
Advanced
V27
Very versatile adjust to fit any miter slot perfect straight cuts
January 23, 2019
Purchased
8 months ago
Woodworking Experience:
Intermediate
Required Upgrade to my Kobalt Table Saw
Recommended by other users as an upgrade for my Kobalt saw. Best move I could ever make. Works like a charm!!!
January 7, 2019
Purchased
8 months ago
Woodworking Experience:
Beginner
Well made works well light
Not the cheapest, seems to be well made using in cabinet shop
September 7, 2018
Purchased
1 year ago
Woodworking Experience:
Advanced
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 14 questions Browse 14 questions and 80 answers
Why did you choose this?
Rockler Store
Very good reputation and consistently good quality for a reasonable price.
David P on Sep 2, 2019
Have one on my bandsaw & am adding another for my router table/shaper. Superlative quality & a pleasure to use.
David M on Jul 4, 2019
Very good reputation and consistently good quality for a reasonable price.
David P on Sep 2, 2019
I need it for my Jet 14" Band Saw.
Keith L on Aug 12, 2019
Have one on my bandsaw & am adding another for my router table/shaper. Superlative quality & a pleasure to use.
David M on Jul 4, 2019
Good reviews. Upgrading the sloppy & chintzy Dewalt miter gauge.
Jim S on May 21, 2019
Want to mount my new cross lap jig to a nice miter for the table saw.
Don B on May 6, 2019
The miters that are supplied with my power tools have too much slop in the T-track.
Chip H on Jan 16, 2019
For accurate miter cuts.
Darrel M on Jan 10, 2019
I need it ....
Michael H on Dec 28, 2018
Recommended by other users of my Kobalt table saw.
William R on Dec 15, 2018
Quality product, good price.
Donald Vonderau V on Sep 2, 2018
I needed it for my new cross lap jig.
Michael L on Aug 9, 2018
Good price and good reviews
Gene R on Jul 6, 2018
Reviews
Scott A on Jul 3, 2018
need good miter for routing table and table saw
Vance S on Apr 29, 2018
Needed a better miter gauge than came with my Dewalt table saw. Incra has always been one of the best in accuracy and use.
Michael L on Apr 17, 2018
Infinite adjustment at good increments.
Donnie M K on Apr 8, 2018
need it
Robert W on Feb 28, 2018
The customer reviews Rockler provides is a great indicator of the product and its quality. The brand is also known for quality.
Leslie B on Feb 27, 2018
reviews indicated good value for quality
luis p on Feb 26, 2018
Gauge that came with my jobsite saw is loose and inaccurate
Stephen O on Feb 25, 2018
It came up with Google but, the reviews really sold me on it.
B R on Jan 30, 2018
I wanted to upgrade the miter gauge that came with my table saw. The construction of the Incra products is the reason I chose this one.
Jefferson L on Jan 23, 2018
Best price to value.
Kirk W on Dec 27, 2017
I needed an accurate Miter Gauge for my Band Saw and Disc Sander.
Nikola on Dec 27, 2017
I have one of these already. They are a great product.
James M on Dec 23, 2017
Christmas wish
Gail K on Dec 13, 2017
Husband chose this as a gift
Joanne H on Dec 7, 2017
The Incra miter gauge I already have has no positive lock at 90 degrees, which is a royal pain in the @ss
James S on Jul 9, 2017
High quality, Made In The USA.
Jerry G on May 26, 2017
Replacing gauge provided with portable table saw
Robert O on Apr 20, 2017
Quality tool, better than my expensive miter saw.
Fred F on Feb 24, 2017
to upgrade toa more quality miter gauge to replace the one that originally came with my table saw
jerry c on Jan 24, 2017
to attach jigs to table saw
richard b on Jan 12, 2017
Good ratings and customer feedback on questions. Need ability to fit with a homemade fence and clamp jig for small pieces on my router table
Bruce D on Jan 9, 2017
angle cuts
samuel d on Oct 9, 2016
Features
William H on Oct 7, 2016
It is a quality piece of equipment.
Charles D on Sep 22, 2016
need
DORIS C on Aug 16, 2016
I need this
Alberto S Z on May 17, 2016
I ordered this item because I needed a guide for my router table. I am impressed and wish I bought it a long time ago!
Charles B on Jan 7, 2016
Needed it
Rick F on Dec 26, 2015
Purchased the Jet 14" Deluxe Band Saw which does not include a miter gauge. After some research decided this was the best value considering quality vs. price.
David M on Oct 4, 2015
Used Jet Band saw came w/o miter gauge.
Richard K on Sep 19, 2015
Bought a used table saw without a miter gauge.
Daniel K on Aug 26, 2015
Needed a Miter gauge because my table saw didnt come with one.
Tycen K on Aug 17, 2015
The gauge that came with the new DeWalt table saw was all plastic and completely inadequate. This was the best choice.
Robert P on May 28, 2015
I have one now dedicated for box joints with my Woohaven Box Joint Jig. Bought this so I can keep the box joint jig dialed in for making bee hives.
Thomas on May 17, 2015
Have several Incra products all of which are good quality.
J H on Apr 29, 2015
I wanted one
Bob C on Apr 17, 2015
because of the name and my stock gauge is sloppy
Robert D on Apr 16, 2015
I need it for my Jet 14" Band Saw.
Keith L on Aug 12, 2019
Good reviews. Upgrading the sloppy & chintzy Dewalt miter gauge.
Jim S on May 21, 2019
I have a Dewalt DWE7480 table saw, not sure what the mitre slot size is. Will this work on my saw?
Ron C on Jun 23, 2016
Looking for a better Mitre for the SawStop jobsite saw I just purchased. Will this work? The stock SawStop one is terrible, really disappointed in the quality.
kirk w on Nov 27, 2016
BEST ANSWER: Measure the width of the miter track on the Saw Stop, If it is exactly 3/4" wide it will work. It has a set of five plastic washers with an eccentric center to allow them to be adjusted to fit exactly in youw saws miter track with no play. It comes with instructions for adjusting it to make 90 degree crosscuts precisely. Some saws have a shaped aluminum table that have miter slots that are less than standard.and are not compatible with this miter gage.
? will the incra Miter Gauge V27 fit bosch gts 10 xc
colin l on Apr 24, 2016
BEST ANSWER: I don't know; it's sliding bar is 3/4" wide and 1/4" thick. It works on my Craftsman table saw and Delta band saw.
I have a SKILSAW 10" table saw! Will this fit my unit?
Skeeter on Mar 27, 2017
BEST ANSWER: I don't know anything about your saw but it will probably fit. The Incra Miter is adjustable to allow a tight fit in the table slot. It has guides that can be moved in and out to fit well and accurately into different width slots.
What it the width of the T? With the gauge in the miter slot, how wide is the part of the part that is perpendicular to the slot?
Harold W on Jan 12, 2017
BEST ANSWER: It's only about 6" and I felt it was the weak point to this miter gauge, but there are good holes for mounting a sacrificial fence which I would do anyway. There are adjustments to make the track fit very snug in the T-Slot with no slop or binding. The angle detents are good.
Will this miter gauge fit my dewalt DWE7491RS 15 amp table saw?
Madeline M on Nov 22, 2016
BEST ANSWER: Probably. It fit my DWE7480.
How long is the bar?
Andy M M on Jun 5, 2016
BEST ANSWER: From the face of the gauge,the bar extends 9 7/8". The total length is 15 3/4" from the back of the gauge to the very tip of the bar. I feel this miter gauge is outstanding and all I need. Great product.
Will this fit a 10 Ryobi Table saw?
BigDad on Sep 2, 2017
BEST ANSWER: Measure the track that the Miter fits in. Mine is a Sears 10" table saw with a 3/4 inch miter slot. It fits perfectly. Hope this helps
is this compatable to craftsman table saws?
A shopper on Jun 19, 2015
BEST ANSWER: Some of the Craftsman table saws have an aluminum table formed from sheet aluminum. The miter track on these does not conform to the industry standard 3/4" width and will not accept this or any other miter gage that is machined to fit 3/4 miter tracks.
what is its country of origin (where is it made?)
don m on Aug 10, 2015
BEST ANSWER: USA - Texas
Will this guide work with a Bosch RA1181 router table?
Tonym on Mar 10, 2019
BEST ANSWER: I don't know as i have a Sears Crafstman table. but i also use it on my rockwell table saw and shaper and it seems to work just fine. good luck!
Will this work in a DeWalt 7490 table saw?
William S on Aug 12, 2018
BEST ANSWER: I use this miter gauge with my Dewalt 7491. It should work for your 7490 also.
Will this miter fit Jet 14" Band saw slot?
A shopper on Jun 9, 2015
BEST ANSWER: This is for use in any standard 3/4" x 3/8" miter slot