VIEW
50104
$69.99
Each
In stock
Here's a gift that always sounds just the right note! The complete kit is easy to assemble and includes pre-cut, unfinished walnut for the case, glass music movement cover, hardware and velvet jewelry compartment liner. Design of box requires movement to be activated by winding key only. If lid opening activation of musical movement is desired one can omit glass piece above movement compartment. Sized for an 18-note movement.
Kit includes:
(1) Precut walnut for case
(1) Plexiglass musical movement cover (movement optional)
(1) Set of Hardware
(1) Velvet Liner
(1) Precut walnut for case
(1) Plexiglass musical movement cover (movement optional)
(1) Set of Hardware
(1) Velvet Liner
| Weight | 2.0500 |
|---|---|
| Tech Spec |
|
| Technical Documents |
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.govWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
4.0 / 5.0
63 Reviews
Five stars
Beautiful wood, awesome project for any young lady and can be personalized in any way
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Musical Jewelry Box Kit
Please continue to offer these kits. They are the only kits I can find on the 'net which are appropriately sized, simple and elegant. I am making them for middle school goddaughters; perfect size!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Enjoyed this project
Fit together very well, easy to assemble and finish
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Good quality wood and fabrication.
I suggest pre-fitting each part before gluing. I didn't and got a couple pieces installed backwards.
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
I made this for my granddaughters.
This went together perfectly. I will by it again!
This went together perfectly. I will by it again!
Added Dec 28, 2018
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Boxes for the ladies!
I would recommend this for others. It is a quick, easy and good way to make a jewelry box for the ladies. It does not require any craftsmanship, but . . . .
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
Will make a good Xmas gift
Glued up easily only needed minor sanding. Finished with about 5 coats of amber shellac. Decided not to install the musical movement. Also the supplied felt wouldn't even cover the whole bottom in one piece so I added my own. Overall very good.
- Was this review helpful? Yes (1) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Good quality and really great price
build it my self it was easy but i needed sometime to finish it up
really worth it
really worth it
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 8 questions
Browse 8 questions
and 65 answers
Why did you choose this?
Rockler Store
Gift for daughter's birthday
Joe O
on Jun 30, 2019
Christmas Gift
Robert O
on Dec 16, 2018
Gift for daughter's birthday
Joe O
on Jun 30, 2019
My husband wants to make something special for our granddaughter for her graduation from high school.
Patricia S
on Mar 15, 2019
My husband wants to make something special for our granddaughter for her graduation from high school.
Patricia S
on Mar 15, 2019
I like this kit because I can add inlay to li
D A
on Dec 7, 2018
What would be an appropriate lid support for this box?
BEST ANSWER: Make a plywood template the size of the top. drill holes completely through the plywood where the hinges go. Then lay the plywood on the walnut top and mark the holes by drilling through the plywood into the walnut. (not too deep!)
- Reply
- Inaccurate
- William A N on Jan 7, 2016
- Purchased on Oct 20, 2015
Is the musical movement included? If not, how much is it and do you have them?
BEST ANSWER: A musical movement is not available. For musical movements see http://www.rockler.com/18-note-musical-movements
- Reply
- Inaccurate
- Steve Staff on Oct 17, 2016
will it take a 30notemusicalmovement?
BEST ANSWER: you have to purchase the player separately. Then it plays a song. I didn't count the notes
- Reply
- Inaccurate
- John A on Jan 16, 2019
- Purchased on Oct 3, 2017
what type of stain and color on walnut wood ?
BEST ANSWER: Hi, Earl,
I just used a clear varnish, couple of coats. That really brings out the depth of the wood without covering up the grain. If you plan to put a velvet liner inside you might ample varnish that area to make sure you like it. /Frederic
I just used a clear varnish, couple of coats. That really brings out the depth of the wood without covering up the grain. If you plan to put a velvet liner inside you might ample varnish that area to make sure you like it. /Frederic
- Reply
- Inaccurate
- Frederic S on Jan 3, 2019
- Purchased on May 5, 2017
How do you install the stopper wire of the musical instrument to be above the back of the box if you have the Plexiglas installed protecting the movement?
Musical Jewelry Box Kit
BEST ANSWER: i made these musical boxes for my granddaughters and i didn't install the plexiglass in them so i just mounted where they fit. sorry i couldn't be more help.
- Reply
- Inaccurate
- Steve J on Dec 9, 2018
Will this box accommodate a 50 note sankyo orpheus movement?
BEST ANSWER: it should fit. I am not familure with this sankyo.i built a couple of these boxes and had no problem with the fit. I did have to have a piece of glass cut for the actuateing arm on the side of the box.
- Reply
- Inaccurate
- Jim B on Dec 1, 2016
- Purchased on Apr 5, 2015
what does the inside look like? are there compartments?
BEST ANSWER: At one end of the compartment there is a small space provided for a music box to be installed. The inside is well sanded and ready to finish or add felt for a softer interior, The divider between the musical movement device and the rest of the interior is a matching piece of walnut, approx. 1/4" thick, also ready to finish. They provide a piece of clear glass to go over the musical movement device, but there is no clear set of instructions on how that relates to the use of the music box, itself. Hope this helps.
- Reply
- Inaccurate
- Malcolm on Oct 21, 2015
- Purchased on Jan 18, 2015
Frequently Bought Together
More Suggestions