$107.00 Each
In stock
Rigid, adjustable and precise.

Kreg Precision Band Saw Fence

Item #
26186
Rating:
90% of 100

Add a new level of accuracy to your band saw! Designed by band saw expert Mark Duginske, this fence provides an unprecedented level of rigidity, adjustability and precision.


Features:
  • Heavy-duty, solid extruded aluminum fence and dovetail bracket design provide plenty of support for rugged operations
  • Two simple adjustments for blade drift
  • Precision lens cursor is magnified and easy to read for even the smallest position changes
  • Finish is Anodized for easy clean-up
  • Pre-drilled holes on the mounting rail fit on most 14" Band Saws
  • Easy to Remove - no tools required
  • Optional resaw guides provides a higher level of control when adjusting for band saw blade drift
(1) Kreg Precision Band Saw Fence
More Information
Brand Kreg
Manufacturer Part Number KMS7200
Weight 8.9000
Tech Spec
  • Material: Aircraft Grade Aluminum
  • Mounting Rail Length: 26"
  • Fence Length: 18"
Tech Docs
Length 18"
4.5 / 5.0
59 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
43
9
4
0
3
Ease of set up, good, ease of use very easy.
It was easy to set up, instructions were easy. Makes cutting thin slices of wood from logs that I seasoned very easy.
August 20, 2018
Purchased
1 month ago
Woodworking Experience:
Intermediate
Kreg Band Saw Fence
I have used the fence a number of times now for resewing lumber and it is so much better than the original fence that came with the Rockwell Bandsaw.

The fence is easy to install, adjust and is very accurate and easy to adjust especially with the micro adjuster add on. I have been resawing lumber that is 6 to 7 "for the width and cutting it to 7/8 and 3/4 thickness and the results have been fantastic. The thickness cuts are more uniform and I have not even tried using the resaw guide I purchased as I have not needed it for wood of this width. I had cut some test strips of 1/8" and they came out very uniform also.

This is a well built and designed product and I would highly recommend it.
August 7, 2018
Purchased
5 months ago
Woodworking Experience:
Intermediate
Easy excellence
Very easy to install and to adjust. First attempt at resawing went great
July 13, 2018
Purchased
2 months ago
Woodworking Experience:
Intermediate
Oregon bandsaw fence
Easily installed, very accurate.
May 19, 2018
Purchased
4 months ago
Woodworking Experience:
Intermediate
Great tool!
April 8, 2018
Purchased
6 months ago
Easy installation. Working great so far.
April 6, 2018
Purchased
1 year ago
Woodworking Experience:
Advanced
No issues to install . Now using band saw vs 10 " delta contractor saw for ripping .
March 23, 2018
Purchased
6 months ago
Well made
This is very good band saw fence made by kreg. I had old band saw and it fit perfectly without any drilling. It works very well.
February 15, 2018
Purchased
7 months ago
Woodworking Experience:
Intermediate
Great fence
Great fence, it fit my jet 14" bandsaw with no problems or drilling, works awesome was able to do some resawing to try my first book match with it
First attempt at book match
Jet 14" bandsaw with the kreg bandsaw fence
February 12, 2018
Purchased
7 months ago
Woodworking Experience:
Beginner
Excellent accessory.
Perfect addition to my vintage 14 inch Delta bandsaw. The fence is easy to adjust and very avvurate once properly installed.
December 30, 2017
Purchased
9 months ago
Woodworking Experience:
Advanced
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 22 questions Browse 22 questions and 96 answers
Why did you choose this?
Rockler Store
Highly recommended by several sources and need a new fence.
Dennis W on Aug 12, 2018
needed it
Paul O on Jun 20, 2018
Highly recommended by several sources and need a new fence.
Dennis W on Aug 12, 2018
name brand
Donna M on Jul 29, 2018
needed it
Paul O on Jun 20, 2018
Good quality tools
Colin B on Jun 18, 2018
It fits my Delta saw.
Jesse L on Jun 17, 2018
To make re-sawing easier.
Russell K on Mar 6, 2018
For alignment when resawing
Joseph G on Mar 5, 2018
Only one I could kind
Frank A on Mar 1, 2018
Great reviews online, excellent experience with Kreg products.
Rush W on Feb 22, 2018
Up Grade to Band Saw
Michael C on Jan 20, 2018
Needed it.
Michael T on Jan 7, 2018
Gift request list
Jane D on Jan 1, 2018
My bandsaw didn't come with a fence. Thought I'd try this one.
Tony W on Nov 3, 2017
Saw it on a WWGOA video and like its versatility.
Howard F on Sep 15, 2017
needed fence for band saw
Gary C on Aug 13, 2017
After a lot of research, it seems to be the best choice for the Jet bandsaw I purchased.
William W L on Jul 17, 2017
It received high 'marks' from those who purchased previously.
Gene G on Apr 9, 2017
My factory Jet fence broke.. This looks like a quality replacement.
Steven D on Feb 25, 2017
My band saw that my son gave to me didn't come with a fence.
Earl R on Feb 17, 2017
need one
tom t on Feb 5, 2017
For band saw..
Larry D on Jan 17, 2017
good reviews, appears to be a higher quality than the Jet proprietary fence
Russell S on Jan 11, 2017
I need a good quality name
Allan J on Jan 9, 2017
Good reviews and I am tired of using make shift fences for my bandsaw
Matt R on Jan 7, 2017
My Jet band saw does not come with a standard fence, bummer.
ROXANNE R on Dec 2, 2016
The reviews are better than for the Jet Bandsaw Rip Fence and a recent video observed indicated the quality of the fence.
David G on Nov 28, 2016
reviews and Kreg quality
Tim C on Nov 27, 2016
You Tube video
Thomas M on Nov 20, 2016
for resaw
samuel d on Oct 9, 2016
It had good reviews
Barry H on Oct 7, 2016
I also restored an old powermatic bandsaw, I needed a fence.
Jim S on Aug 29, 2016
The Kreg brand name
Richard D on Aug 22, 2016
Reputation and reviews.
Larry M on Aug 21, 2016
For the wavy peels of oak, I guess, which came off the big slab . Practiced until my hands were bleeding ( well maybe) to get a standard 1/4 inch saw cut. It works this fence.
wayne y on Aug 12, 2016
this was the one my dad wanted
Eric H on Jun 29, 2016
For my Porter Cable 14" bandsaw.
William T on Jun 22, 2016
Man, wish I had bought this years ago. Good product - fair price.
Robert B on May 10, 2016
Needed a fence for my 14" Delta Bandsaw and the Kreg jig allows for the removal of the guide with minimal effort.
Steve B on May 3, 2016
Need it for bandsaw.
John W on Apr 16, 2016
Kreg has a great reputation for quality. Reviews I read were highly complimentary. This product should fit my saw perfectly
Joe A on Mar 30, 2016
I bought and re-built a used band saw and Ii needed a nice fence for it. It works great and is very precise. High quality materials also.
Harry on Mar 3, 2016
Like Kreg fasteners system
Gary S on Feb 20, 2016
Best fence on the market for the price.
Robert A. S on Feb 6, 2016
i need a fence for my drill press and I've had great experiences with Kreg products
mark a on Oct 24, 2015
Was well rated in Fine Woodworking. I liked the ability to add an auxiliary fence and be able to independently adjust for drift without affecting fence perpendicularity to table. I also wanted to try the matching resaw guide.
Ronald L on Aug 19, 2015
I was tired of making adjustments to my old fence and repairing it.
Kreg makes quality products. The Kreg fence system will be 100% better.
J A on Jun 29, 2015
Improve band saw performance in resawing.
Ross B on Apr 25, 2015
I use KREG products in other applications and find them solid and reliable and most of all accurate and VERY LONG lasting. This went together easily and fit perfect. Very easy to adjust drift and stays as set up.
James J on Apr 19, 2015
band saw came without a fence
Richard W on Apr 18, 2015
up grade saw
Rick B on Apr 10, 2015
name brand
Donna M on Jul 29, 2018
Good quality tools
Colin B on Jun 18, 2018
Is it possible to mount this on a older craftsman table saw?
Dustin on Feb 2, 2016
BEST ANSWER: Yes, it looks like it could work. Have to drill new mounting holes in the fence to align with the table saw mounting holes. I evaluated based on a 1976 vintage Craftsmen table saw with cast top. Of course length of travel on this fence is limited compared to a table saw fence.
Will it work on a power matic model 81 bandsaw?
Pete F on Jan 8, 2016
BEST ANSWER: Not sure I am not familiar with Powermatic bandsaw details. Suggest you contact Powermatic technical and Kreg support too. Powermatic and Jet I believe are manufactured by same company. It fits the Jet perfectly. Hope this helps.
Will this fence work on a Delta 28-303?
David K on Jun 29, 2015
BEST ANSWER: Yes, I have it mounted on mine and it works fine. I use it for resaw; It does take the right blade and some practice but it does make resawing easier.
Will this fence work on a Delta 14" 28-299 saw?
Ken A on Aug 3, 2017
BEST ANSWER: Hello. This model is not on our compatibility chart (https://www.kregtool.com/webres/Files/pdf/BandsawFenceCompatibiltyChart.pdf) but it looks like most of the 14" Delta Band Saws are compatible. I cannot say if it will or will not fit for sure. Thank You - Josh.
Does the Craig fence work with a 14 5/8 Porter Cable Band Saw?
Richard C on Dec 5, 2015
BEST ANSWER: I have the Kreg but it is mounted on a 14" Jet bandsaw. The sliding track is long enough to fit a wider table. I would recomend to order it and size it up as a dry fit before drilling any new holes. This is a sterdy tool and easy to adjust as with other Greg products. Once adjusted it holds the adjustments until you choose to change it. Example, I adjusted for drift upon inital setup. Another advantage is ability of mounting jigs and higer fences with sliding hardware. Fast and easy. No need to disassemble the fence to create a new setup or to take one down. Hope this helps.
will this work on craftsman 12" MN 113.243311?
James M on May 14, 2018
BEST ANSWER: I do not see that on the compatibility chart. You might want to contact Kreg directly to see about that model.
http://go.rockler.com/tech/kreg-compatibility-chart.pdf
How far apart art the mounting holes for a Delta bandsaw?
Steve S on Jun 1, 2017
BEST ANSWER: Delta has a number of different models, so I can't answer the question with that information. However, I can tell you that the optional mounting holes on our fence's mounting rail are 11.156," 11.5," and 12.875" apart on-center.
Ben Bolluyt
Kreg Tech Support
will this fence work on rikon 10-321 14" band saw?
H H on Jan 19, 2017
BEST ANSWER: I put this on my Delta and install was easy and it works well. I looked at the Rikon cut sheet on line and am confident that it will work on it as well. If you are doing resaw work there is an accessory for the fence that you might want to consider, it make the resaw easier to control. Just ask your friendly Rockler sales person
Will this work on the Craftsman (Rikon) 14" bandsaw?
bob h on Jun 29, 2016
BEST ANSWER: Yes! I installed mine about a year ago, and I couldn't do without it. You will have to drill two holes in the front of the table, but it is no big deal.
Will this fence work well on my old Rockwell/Delta model 28-365 20” bandsaw or is the fence too short?
Sam S on Jul 21, 2018
BEST ANSWER: Hello,
I am sorry to say that your model of band saw was not listed on the compatibility list. So, I do not know exactly what modifications you would have to make in order to make the fence work. One of the most common modifications is drilling a hole in the side of the table top to accommodate the mounting rail for the fence. If you should take a chance on the fence and discover that it will not work for you, you can return the fence for a full refund. Thanks!
Does this work on a Rikon model 10" - 10-305??
Sam Y on Aug 9, 2017
BEST ANSWER: Hello. I cannot tell you for sure that it will fit as we have not tested this particular model. I looked at the Rikon 10-305 and I know you will at the very least have to drill mounting holes in your saw for the mounting rail on the Band Saw Fence to secure to. Additionally, this is a 10" saw whereas our Band Saw Fence was designed for saws greater than 14". Depending on where you purchase it, you can see if it will work and if not you may return it to the dealer. Thanks - Josh.
Will this work on a Ridgid band saw?
William B on Jul 31, 2017
BEST ANSWER: Hello. We have one model of Ridgid that we have tested to be compatible, model BS1400. If you are using another model I cannot guarantee that it will or will not fit. You can view this compatibility chart on our website (https://www.kregtool.com/webres/Files/pdf/BandsawFenceCompatibiltyChart.pdf). Thank You - Josh.
My Craftsman Model # isn't listed. I have the 14" 124.32607. Is this fence compatible?
Terry S on Apr 30, 2017
BEST ANSWER: Hello Terry,

Since your Craftsman Saw is not listed on our compatibility chart, if your saw table has the mounting holes on the front of the table could always modify your Band Saw table by drilling holes to match the fence guide.

Thank you,
Billy H
Will this fence fit a Jet 14" JWBS band saw?
Ronny B on Apr 25, 2017
BEST ANSWER: Hello Ronny,

Your saw is not listed on our compatibility chart. But you could always modify your Band Saw table by drilling holes to match the fence guide.

Thank you,
Billy H
I have Shopsmith bandsaw with an upgraded Aluminum table. WI'll this fit on the Shopsmith?
G O on Feb 28, 2017
BEST ANSWER: If your bandsaw has tapped holes on the front edge of the table it will work.
Does this fit a 14” Harbor Freight Bandsaw? I see 2 pre drilled holes on the ends of both sides of the table.
Ryan B on Sep 3, 2018
BEST ANSWER: I don’t know if it will
Is possible to mount this on a Delta Milwaukee 14 inch Bandsaw 96-6803?
Ken P on Jun 13, 2018
BEST ANSWER: Unfortunately, the compatibility with that bandsaw is not yet known to have been tested, so I can't say for sure. The best way to assess would be to find the most similar Delta bandsaw from this list: https://www.kregtool.com/webres/Files/pdf/BandsawFenceCompatibiltyChart.pdf
Will this fence fit on an old Powermatic 141 band saw?
Walter S on Apr 26, 2018
BEST ANSWER: Hello,

Your band saw was not listed on the compatibility list and therefore it can't tell us the modifications you have to make to retrofit it to your band saw. Usually, it is a matter of drilling holes in the side of the table to accommodate the holes in the rail for mounting the band saw fence. Either way I cannot say with certainty that the fence will be compatible, but if for some reason it is not then you can return it for a refund.

Thanks!
Adjusting Kreg bandsaw fence for blade drift re resawing ?
Al no email on Mar 23, 2018
BEST ANSWER: Hello Al,
I have attached the link to the manual for the Bandsaw. Please look at page 8 as they have the directions for it.
Thank You,
Billy H
Kreg Tech Support
https://www.kregtool.com/webres/Files/Kreg%20-Band-Saw-Fence-Manual.pdf
Will this fit on a Delta 14" bandsaw 28-200?
CHRIS S on Feb 8, 2018
BEST ANSWER: That exact model isn't on our compatibility chart, which you can see here: https://www.kregtool.com/webres/Files/pdf/BandsawFenceCompatibiltyChart.pdf
The closest one on the chart is the 28-203; however, that one only requires the slight modification of an additional hole drilled into the mounting rail for the fence to match the holes on the table.
Ben Bolluyt
Kreg Tech Support
Will this work on aRockwell Model 14?
Rich J on Dec 1, 2017
BEST ANSWER: Hello, unfortunately this is not on our compatibility chart so I am unable to give you a definitive answers. The Band Saw Fence is designed for most 14" saws so I would assume that it will work but I could not tell you if any modifications would need to be done. Thanks, Josh.