Menu
Cart
Search
Menu
Account
$19.99 Each
In stock
Find In Store
Add to Wish List
Price Alert

Rockler 36'' Miter Track

Item #
48037
Rating:
96% of 100
56  Reviews
Set up your jigs, fixtures and shop-made router tables to accept a smooth-sliding miter gauge. This 36" miter track is constructed of 100% aluminum for excellent durability without the weight. The track fits into a 1" x 1/2" deep dado, and accepts a standard 3/4" x 3/8" miter bar. For fast, trouble-free installation, the miter track comes pre-drilled and countersunk with four holes for #6 mounting screws (not included).
(1) 36" Aluminum Miter Track
More Information
Manufacturer Part Number TA48037
Weight 0.0900
Tech Spec
  • Miter track outside dimensions: 1"W x 1/2"H x 36"L
  • Precision manufactured to fit a standard 3/4" x 3/8" miter bar
  • Requires 1" x 1/2" deep dado
  • Made from premium-grade anodized aluminum
  • Pre-drilled for #6 flat-head screws (not included)
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

Powered by TurnTo
4.8 / 5.0
56 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
50
5
0
0
1
Works as intended
September 4, 2019
Purchased
 1 month ago
Woodworking Experience:
Advanced
Miter gauge track
Put it on my disk sander table works great and installed easily.
July 11, 2019
Purchased
 3 months ago
Woodworking Experience:
Intermediate
Well made and reasonably priced.
Works as expected on my custom built router table for a horizontal featherboard. I would have preferred that it came in a 48" length, the same as my table but ordering two 36" did the trick.
July 8, 2019
Purchased
 3 months ago
Woodworking Experience:
Advanced
Great
It's a great miter track. Better than description.
Thanks Rockler. Keep up the great work.
June 8, 2019
Purchased
 4 months ago
Works as expected, exact dimensions, happened to beat other's price.
Miter track worked perfectly to enable my sled to extend onto outfeed surface
User submitted image
May 22, 2019
Purchased
 4 months ago
Woodworking Experience:
Intermediate
for router table
April 13, 2019
Purchased
 over 4 years ago
Woodworking Experience:
Intermediate
Router table upgrade
Installed this miter track in a router table that previously had a smaller track that did not fit the Rockler box joint jig so I used a table saw to make the slot wider and deeper.
The 36" track is a perfect fit, and it works perfect.
April 9, 2019
Purchased
 6 months ago
Woodworking Experience:
Intermediate
Roclker 36" Miter Track
Worked great
February 3, 2019
Purchased
 8 months ago
Woodworking Experience:
Intermediate
I used it for my homemade router table
Recently I bought a finger joint jig from Rockler, Concord. The only missing element was the miter track and now that is complete and perfects cuts.
January 16, 2019
Purchased
 8 months ago
Woodworking Experience:
Intermediate
Good Quality
worked perfect for my custom builds.
January 5, 2019
Purchased
 8 months ago
Woodworking Experience:
Intermediate
Powered by TurnTo
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 7 questions Browse 7 questions and 63 answers
Why did you choose this?
Rockler Store
For router table top
R E on Aug 30, 2019
For a small, one wheeled railroad.
Jeannie C on Aug 22, 2019
For router table top
R E on Aug 30, 2019
Building my own router table.
Chet B on Aug 24, 2019
For a small, one wheeled railroad.
Jeannie C on Aug 22, 2019
For table saw outfeed table
Christopher B on Aug 9, 2019
Router table enhancement
Mandi A on Jul 29, 2019
making a router table
sean w on Jul 29, 2019
Need for next DiY extension table for new to me bandsaw<br />Ron
Ron N on Jul 16, 2019
Jigs, Jigs, Jigs....
Dan B on Jun 19, 2019
Need a miter track in my homebuilt router table.
V H on Jun 13, 2019
Building a new router table and this is just what I need.
David Q on Jun 7, 2019
To finish my new custom router table. The new table will be using my 3 1/4 HP Triton Router and will require multiple feather boards for safety.
John N on Jun 5, 2019
building combo table saw router workstation
John Matarazzo M on Jun 4, 2019
I'm building a router wing for my table saw and wanted a miter slot.
Jacob H on May 26, 2019
Building a router table
Charles G on May 10, 2019
make jig
C H on Apr 12, 2019
project components
Mike M on Mar 25, 2019
building custom router table
Milton M on Mar 21, 2019
table saw outflow table
Robert L on Mar 21, 2019
I'm building the router table organizer, from the Wood Workers Journal Feb. edition. I'm excited to finish and use this, great idea.
gary p on Mar 17, 2019
Needed to complete project and found I only had 1 at home
GEORGE on Mar 15, 2019
this is just the beginning of my table sled
Satber h on Mar 6, 2019
To complete my shop made router table
David S on Mar 5, 2019
add track to router table
Herbert W on Feb 28, 2019
I need it for a router table I am building.
Tony S on Feb 20, 2019
Need. This for my Delta shaper
John H on Feb 10, 2019
For a router table I am building
Michael O on Feb 3, 2019
for the router feather board base
RANDYALLEN7 MARTIN on Jan 30, 2019
Just built a new router table and needed this for my miter gauge.
Stanley Smith K on Jan 30, 2019
I needed one for my router table and wanted to match my t track
Matthew L on Jan 24, 2019
Project
Francis M on Jan 17, 2019
Project
Alvin D on Jan 5, 2019
storage project
Terry F on Jan 4, 2019
Building drill press table
Todd E on Dec 29, 2018
building a cross cut sled for table saw
Scott D on Dec 28, 2018
I am building a router table and the plans I have recommended it.
M M on Dec 20, 2018
For my router table
Quinn2 on Dec 14, 2018
i needed one
Joe on Oct 25, 2018
BUILDING TABLE SAW SLED
DAVID CHEVERIER O on Sep 10, 2018
for my new router table
Floyd C on Aug 13, 2018
A great price!!
George M on Aug 12, 2018
I built a mobile saw table with my miter saw,table saw,and compound bevel miter saw and gonna extend the miter tracks on the table saw for the sled to work better
Dennis on Aug 3, 2018
Needed for a project I'm building
Charlie on Aug 2, 2018
making a new table saw top
Robert U on Jul 27, 2018
I am building a work bench for my job site table saw and the tracks will be an extension of the table saw's tracks.
Howard S on Jul 26, 2018
For my table saw work bench
Richard D on Jul 24, 2018
Working on a project the requires this part.
Donald G on Jul 23, 2018
Built a new router table, needed the miter track. Rockler had the better pricing.<br /><br /> George M.
George M on Jul 14, 2018
needed it for my homemade router table
james b on Jul 6, 2018
I need this item for my router table, to use Rockler 4-Piece Router Table Accessory Kit.
Mamuka V on May 24, 2018
Allow for small piece work on custom router table
Seth H on Apr 17, 2018
Building my own router table.
Chet B on Aug 24, 2019
For table saw outfeed table
Christopher B on Aug 9, 2019
wiil this work on Ridgid brand saws?
woody on Jun 27, 2015
BEST ANSWER: I doubt it. This has a 3/4" slot with an overall thickness of 1". I believe the Ridgid has 3/4 T-slot. I am making a new router table so I used this for the miter guide.
Can I use this miter track for a diy tablesaw?
Or is their a better option?
Pooky on Feb 11, 2018
BEST ANSWER: The miter track would work for a while, but it would ware much faster than a cast iron one because it is made of aluminum .
Does this work with the Incra mitre Gauge?
Ewan F on Jul 18, 2015
BEST ANSWER: The simple answer is yes. The Rockler Miter Track will work with any standard size Miter gauge. However, some miter gauges such as the Incra 1000 HD have an extra feature on the front that is used to keep the miter gauge from lifting from the slot. This feature will not fit in the Rockler Miter Track but on the Incra models this feature is easily removed with 1 Phillips screw.
What bit do I need to route the channel? How many passes? Feed direction? I’m new to this and these uncertainties are holding me back. Thank you
C Michelle R on May 15, 2018
BEST ANSWER: I believe I used a 1" double carbide router bit on my table. I was using soft #3 pine, so I only had to make one slow pass. Might want to make two passes and especially if you're using harder wood. The key is to take your time on the passes so that you do not chip or splinter your wood.
Will this accept a mitre gauge with a wheel that rides in the side of the table saw mitre slot?
Ron T on Feb 7, 2016
BEST ANSWER: No, I also have a miter gauge with a guide disk on the end and it will not fit in this track unless you can remove it. There are a few brand name manufacturers who have miter gauges that can adjust out the "slop". Those will work just fine.
What track product would I need for use with a Skil Worm Drive tablesaw and miter guage?
Merrill C on Sep 12, 2018
BEST ANSWER: I'm not familiar with the Skil Worm Drive table saw, however, if the miter gage has a standard 3/4" guide bar,
the Rockler track will fit it. How will the track be used? Will the track be fitted into the saw table, or a fabricated table extension?
Frequently Bought Together
  1. Rockler Miter Slot Hardware Kit
    Rockler Miter Slot Hardware Kit
    $9.99
  2. Ideal for any jig that requires moving workpieces over its surface.
    Flush Mount Miter Slot Hardware Kit
    $7.99
  3. 24063 - 17-Piece Universal T-Track Kit
    Rockler 17-Piece Universal T-Track Kit
    $37.99
More Suggestions