VIEW
58215
$119.99
Each
In stock
Thanks to our extruded aluminum fence backer, you'll get precise, straight cuts and easy, tool-free adjustments.
The core of the Rockler Router Table Fence is a precision 32'' aluminum extrusion that provides a laser-straight reference surface immune to fluctuations in humidity. Comfortable knobs make it easy to adjust the MDF fence faces for different bit sizes, and to adjust the entire fence back and forth and side to side. The top-mounted Universal T-track runs the full length of the fence, making it easy to add flip-down stops and other accessories. MDF fence faces are coated with melamine for smooth, friction-free routing, and also feature T-tracks for featherboards and stops. A transparent bit guard is included to keep your fingers safe. To add a dust port and featherboards, see our 4-Piece Router Table Accessory Kit (#56764, sold separately).
Features:
- Extruded aluminum backer provides a stiff, straight backbone that won't shift with humidity changes
- Comfortable knobs for easy, tool-free fence adjustments
- Includes bit safety guard for safe routing
(1) Rockler Router Table Fence
(1) Bit Safety Guard
(1) Bit Safety Guard
| Brand | Rockler |
|---|---|
| Weight | 7.1500 |
| Tech Spec |
|
| Technical Documents | Router Table Fence Instructions |
| Length | 32'' |
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.govWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
4.1 / 5.0
24 Reviews
Router Table Fence
This is exactly what I was looking for. I had attempted to construct my own but not even close to the quality
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Love it! Easy to install and works wonderfully!
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
GREAT PRODUCT
Your product is just what I was looking for. I am enjoying the ease of function.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Good addition for my Rockler router table. Good quality and solid construction.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Good little router fence
I'm giving this fence five stars for its excellent value. It's not the perfect fence, and it doesn't exhaust the long list of possible features, but it is well made, sturdy, square, goes together well, and does everything I need my router fence to do, all at a reasonable price. It would cost me much more in time and materials to make something of this quality myself. My biggest gripe is that you have to buy an additional accessory in order to properly implement dust collection, which made me feel like I was being nickel and dimed a bit, but it's not a big enough deal to make me feel the need to deduct a star. If you are in need of a router table fence that simply works, and works well, you can buy this one without reservation.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
2nd time 'round
This is the second Rockler router table and fence system I have purchased. I've never bothered with another. Hard to change from something that works well.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Router table fence
Works great right out of the box. Had the table for a while, but the garage sale find was missing the fence. Very well made.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Have one in my base shop and now in my mobile shop setups.
Simple, square and true. Does what I need at a price that lets me get back to work and let it pay for itself the first day.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
I BOUGHT ROCKLER HIGH PRESSURE LAMINATR ROCTER TABLE TOP WITH ROCKLER TABLE FENCE AND JOINTING SHIMS I AM VERY HAPPY WITH THE PRODUCTS I WOUND RECOMMEND
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 16 questions
Browse 16 questions
and 53 answers
Why did you choose this?
Rockler Store
I added a router to my table saw extension table and now I need a fence for it.
Patrick M
on Feb 24, 2019
I'm have recessed my porter cable 890 router and need a quality fence. I have always trusted Rockler.
Jon K
on Jan 5, 2019
I added a router to my table saw extension table and now I need a fence for it.
Patrick M
on Feb 24, 2019
Best router fence I could find for the money.
George L
on Feb 19, 2019
Can you just purchase the router table fence face?
BEST ANSWER: If you are referring to the sacrificial MDF pieces then yes. Our item # is 120580.They are sold as each, but it is better to buy two of them together. Call 800-376-7856 to order.
- Reply
- Inaccurate
- Rick H Staff on May 9, 2016
What is the narrowest width between t-track that you can have to mount this fence? The pictures show 2 sets of slots on the back side of the fence to mount to the table but I can't find any details about the min/max width. My table is 24" wide and the t-tracks are about 18" apart on center. Will the pre-cut slots allow for this narrow setup?
BEST ANSWER: There are 2 sets of slots on this fence. The inner set has a range from about 19-1/2" to 24-1/4". There is plenty of room for you to drill a pair of holes 18" on centers to match your T-tracks.
- Reply(1)
- Inaccurate
- JACK P on Sep 24, 2016
- Purchased on Jun 19, 2016
Can this table fence guide be used with a custom router table and if so is there any template guide information with the fence?
I don't get it. Why is this twice the price of the Rockler 49298 fence when it looks like it has fewer accessories built on (and the same basic description)? What is the 58215 offering that's not on the 49298?
Rockler Router Table Fence
BEST ANSWER: This is an model that we had before we changed back to the blue aluminum. There is really no difference between them. We are just selling them out till they are gone
- Reply
- Inaccurate
- Rick H Staff on Jun 15, 2015
what size is the aluminum angle? 3x3, or 2 1/2 x2 1/2?
What is the difference between the this router table fence and the drill press fence? They appear to be the same design.
Rockler Router Table Fence
BEST ANSWER: The Router fence is taller(by about an inch?) and wider(32" vs 24"), also the center above the bit is connected compared to the drill press fence.
- Reply
- Inaccurate
- Steve S on Aug 15, 2016
Trying to locate fence replacement parts?
BEST ANSWER: Replacement parts are available for the Rockler Router Table Fence. Please contact Rockler Technical Services at 800-260-9663 for assistance.
- Reply(1)
- Inaccurate
- David Staff on Apr 10, 2019
Can this be used with a kreg stop on it?
BEST ANSWER: If the Kreg stop is for a 3" high fence then it should work.
I use the 3" Rockler flip stop on mine and they work well.
I use the 3" Rockler flip stop on mine and they work well.
- Reply
- Inaccurate
- PHIL R on Aug 24, 2018
- Purchased on Oct 20, 2016
Is the base actually perpendicular to the face? Is it truly 90 degrees, or do I need to shim it to make it accurate?
BEST ANSWER: Using a Stanley 8" try square, I found the base to fence angle to be nearly a perfect 90 degrees. Unlikely that shimming would be necessary unless an extreme precision angle was required.
- Reply
- Inaccurate
- Robert M on Feb 14, 2018
- Purchased on Feb 9, 2016
Will this fence work on a table that is 24" long?
BEST ANSWER: It should. I have the 32" router table with it looks the same as the one in the pix and there are wide slots to be able to adjust left to right. You can go to the store they have them on display you could measure the slot to see if it works for you. Good Luck, hope it works for you!
- Reply
- Inaccurate
- BRUCE A on Apr 6, 2016
- Purchased on Feb 7, 2015
Is it possible to offset the outfeed side of the fence to perform jointing operations?
BEST ANSWER: As the fence is one extruded piece, you would need to "shim" the left side sliding fence. Rockier use to make a shim kit for the router fence.
You can use a sheet of paper, or veneer strips to move the fence out.
You can use a sheet of paper, or veneer strips to move the fence out.
- Reply(1)
- Inaccurate
- Peter S on Feb 22, 2016
- Purchased on Mar 14, 2015
What is the distance (height) between the T-track on the front to the surface of the router table?
Which is a better fence - this one (the Rockler Router Table Fence) or the Rockler Pro Router Table Fence? What are the differences between them?
What is the size of the opening in the aluminum angle-stock, bottom and front?
I have had this fence for several years and it works great but over time the bit opening has gotten chewed up somewhat. I have looked but can’t find a replacement for the melamine MDF parts. Do you make a slotted MDF that woul work on this fence? `
Frequently Bought Together
More Suggestions