VIEW
50464
$399.00
Each
Direct Ship
Ships directly from the manufacturer.
Estimated Delivery time: 14 business days.
Estimated Delivery time: 14 business days.
SawStop RT-LFT 4-Post Router Lift with Lock
Conveniently raise and lower your router from the top of the table—chain-drive mechanism allows smooth operation.
Item #
50464
Built for precision and ease-of-use, the SawStop Router Lift features a heavy-duty four-post lifting system that's chain-synchronized for smooth, even lifting. It also features a positive lock mechanism to prevent downward creep. Both the elevation and locking mechanisms are controlled from above the table, so you don't have to stoop to make adjustments. The adaptive router clamp and included reducer collars accept router motors from 3-1/4'' to 4-1/4'' in diameter. 9-1/4'' x 11-3/4'' router plate fits perfectly into all SawStop Router Tables.
(1) SawStop RT-LFT 4-Post Router Lift with Lock
(1) 1-1/2'' I.D. phenolic insert ring
(1) Starting pin sleeve
(1) Elevation crank
(1) Insert ring wrench
(1) 3-1/2'' router reducer collar
(1) 3-1/4'' router reducer collar
(1) Pack of hex wrenches
(1) 1-1/2'' I.D. phenolic insert ring
(1) Starting pin sleeve
(1) Elevation crank
(1) Insert ring wrench
(1) 3-1/2'' router reducer collar
(1) 3-1/4'' router reducer collar
(1) Pack of hex wrenches
| Brand | SawStop |
|---|---|
| Manufacturer Part Number | RT-LFT |
| Weight | 18.0000 |
| Tech Spec |
|
3.7 / 5.0
3 Reviews
The porter cable 7518 does fit
Willem Is incorrect about fitting the porter cable 7518. In fact if you go to the Sawstop website and look under faq it says that the most commonly used router for the lift is in fact the Porter cable 7518
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Fantastic lift went in the table with no issues
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Does NOT fit larger routers
After purchasing, you find the lift's manual states max router diameter of 4.2", which conflicts with SawStop and Rockler websites stating max diameter of 4.25". My PorterCable 7518 router with diameter of 4.20" does NOT fit in the clamp. Called SawStop to see if I was doing anything wrong or there were other actions to take; SawStop service reps response was to not use a router greater than 1 to 1-1/2 HP or 3.5" in diameter.
SawStop website picture again using what looks like a PorterCable 7518
- Was this review helpful? Yes (19) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (19) No (0)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions
Browse 4 questions
and 2 answers
Why did you choose this?
Rockler Store
To use with my sawstop table
Alfonso P
on Nov 21, 2018
To use with my sawstop table
Alfonso P
on Nov 21, 2018
I Wanted to upgrade my router with a good lift, and brand quality.
Jason
on Jun 21, 2018
I Wanted to upgrade my router with a good lift, and brand quality.
Jason
on Jun 21, 2018
Will the Porter-Cable 7518 Variable Speed 3-1/4 HP Router work in this lift?
BEST ANSWER: Thank you for your interest in SawStop! In response to your question, yes, our Four-Post Router Lift is compatible with the Porter-Cable 7518 router.
- Reply(1)
- Inaccurate
- SawStop S SawStop Expert on Jun 26, 2018
Will this lift work with the Ridgid R2900 Router?
Will this lift work wth my DeWalt 618 router?
BEST ANSWER: Yes, this is the router I am using in SawStop lift. You just need to use the reducer collar. No problems.
- Reply
- Inaccurate
- David B on Oct 18, 2018
- Purchased on Jun 29, 2018
Is this lift work with my Milwaukee router model # 5625-20?
Related Products
More Suggestions