$36.99 Each
In stock

Small Router Bit Case

Item #
60588
Rating:
86% of 100
Small Router Bit Case
Small Router Bit Case

Solid wood cases firmly hold 1/4" and 1/2" shanked router bits (sold separately) for easy carrying and convenient storage. Small router bit case is ideal for storing different categories of bits, including straight, roundover, raised panel door and specialty bits. With rubber feet on bottom for standing.

(1) Small Router Bit Case
More Information
Weight 2.7500
Tech Spec Fits:
  • 20 1/4" Shank Bits
  • 30 1/2" Shank Bits

  • Case Dimensions: 12 7/8" L x 7" W x 4 1/8" H
  • Case Material: Solid Wood
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

4.3 / 5.0
7 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
5
0
0
0
Very nice wooden router bit case
I'm a beginning woodworker and I wanted a quality case for my router bits...one that would keep them sharp and secure them from banging into one another. This case accomplishes that, but the bits can be very difficult to take out of or put in the included foam insert. My solution is to use an old leather work glove to remove and replace the bits as I need.
July 6, 2016
Purchased
over 2 years ago
Woodworking Experience:
Beginner
Router bit case
This is a great replacement for one that no longer held all my bits.
March 27, 2016
Purchased
over 3 years ago
Woodworking Experience:
Intermediate
Fine case. Better constructed than the photos might suggest. A little pricy & could use a small handle. Otherwise a good case that holds a fair number of bits.
April 28, 2016
Purchased
over 2 years ago
Woodworking Experience:
Intermediate
Overall I'm very happy with this...
Overall I'm very happy with this case. As other reviewers have said, I should have bought the larger one!I've run into two issues with this case that have made me rethink my bit storage a little. First, the manufactured holes do hold the bits very tight. It can be hard to get bits in, and even harder to get them out. I've cut myself more than once doing this, and every time it gets me thinking about what to do differently. The second issue is that the box is fairly limiting on how tall your bits can be. I have several pretty tall bits, and they don't fit in the case. It's a little obsessive on my part, but I would really like a solution that lets me keep all the bits in one place. I will probably end up pulling the insert out, enlarging the holes slightly and then putting the insert in a drawer to fix the height issue. The box will make great storage for something else!
November 6, 2012
I purchased and really like the...
I purchased and really like the large case that indeed filled up fast. I used a 1\2-inch brad point bit on the drill press and drilled out the 1\4-inch holes. The bits fit snug, however the newly drilled holes don't grab the bit nearly as hard as the manufactured holes. I have cut myself while pulling a bit from a pre-cut hole. I now use a piece of leather to wrap the pit before removing\replacing it. This is preferred over the thought of my bits bouncing around in the case.
March 13, 2011
The storage case works just fine...
The storage case works just fine for its intended purpose. It's well constructed and definitely does a nice job protecting the bits. My one complaint would be that it holds the bits quite firmly, making it difficult to extract them and making me worry about cutting myself in the process.
March 4, 2011
This router case is well-constructed, easy...
This router case is well-constructed, easy on the eyes, usable, and not overly brutal to the wallet, especially if you catch it on sale. The rows alternate between 1/4" and 1/2" shank, and almost all bits (that I have, anyway) fit in the case fairly well -- the exception being really long straight bits. Extremely wide bits can require a bit of fiddling to get to live peacefully with their neighbors.The padding holds the bits well, occasionally being a bit reluctant to give up its charges, but not incapable of being persuaded. My biggest regret over buying the case is that I didn't get the larger case, as it took a surprisingly short time to fill it.Overall, a decent purchase.
May 26, 2009
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions Browse 4 questions and 20 answers
Why did you choose this?
Rockler Store
to keep my expensive bits safe and out of the salt air here on Maui.
R C on Dec 28, 2018
Great to store and organize router bits. My second one of these.
Jim on Oct 2, 2018
to keep my expensive bits safe and out of the salt air here on Maui.
R C on Dec 28, 2018
Protect loose bits
Casey K on Nov 20, 2018
Great to store and organize router bits. My second one of these.
Jim on Oct 2, 2018
I chose this because the bit storage in my router case allows the bits to fall out and rattle around in the case whenever the case is moved.
Gavin A on Sep 27, 2018
I recently bought one of these using your Special Catalog Supplement. I like it so well I'm now ordering another.. Any chance of a price break to match the one I already have. Here's Hoping !!
Bill R on Jul 6, 2018
Husband's gift request
KATHRYN A on Jun 12, 2018
To store router bits in a compact, secure way.
David R on Apr 26, 2018
need a safe place to store my bits this case looked well made
Ede S on Apr 11, 2018
I need something keep my bits in together
Ted C on Feb 10, 2018
A place to store my bits besides a drawer
Bob D on Nov 16, 2016
Because I needed additional router bit storage.
Mark C on Sep 21, 2016
Need some place to store router bits so they can be found!!!!
Norma W on Jul 20, 2016
I don't need the large storage box
Michael R on Mar 2, 2016
Pricing. Quality has been determined and I'm happy with my purchase.
Mark E on May 24, 2015
Protect loose bits
Casey K on Nov 20, 2018
I chose this because the bit storage in my router case allows the bits to fall out and rattle around in the case whenever the case is moved.
Gavin A on Sep 27, 2018
Is the interior bit holder included in the box?
John E on Jun 9, 2018
BEST ANSWER: Yes! It arrives as pictured - 1/2” soft foam padding in the lid and the bit holder insert fits snugly in the bottom of the box. The bit holder is a 1-3/8” thick, very dense foam that hold all bits really well, no chance of them accidentally coming out. There are five rows (L to R) that alternate 1/2” shaft and 1/4” shaft sizes. In total there are 30 - 1/2” shaft holes and 20 - 1/4” shaft holes. The box is very lightweight and sturdy enough.
How snug do the bits fit into the foam? If installed into a box with a handle would the router bits fall out if stood on its side or even placed upside down? I'm thinking about making a box or modifying the lid to the router bit storage box Rockler offers so that both the bottom of the box and the underside of the lid both store router bits.
Zachary T on Nov 18, 2018
Small Router Bit Case
Small Router Bit Case
Router Bit Tray
Router Bit Tray
Large Router Bit Case
Large Router Bit Case
BEST ANSWER: The bits have a good tight fit. I cut mine to fit in 2 separate boxes, using the small holes for 1/4 inch drive drill bits. They can be turned upside down and even shaken around without the bits falling out.
The reviews mention low height clearance. What is the maximum bit length that this case can store?
JASON C on Oct 13, 2015
BEST ANSWER: 2"
More Suggestions