In stock
Grouped product items
Product Name Price Qty
24" x 48" Cherry Plywood, 1/4" Thick
24" x 48" Cherry Plywood, 1/4" Thick Item #: 44133
In stock
$30.99
24" x 48" Cherry Plywood, 3/4" Thick
24" x 48" Cherry Plywood, 3/4" Thick Item #: 49690
In stock
$45.99

24'' x 48'' Cherry Plywood

Item #
GRP40006
Rating:
68% of 100
24'' x 48'' Cherry Plywood
24'' x 48'' Cherry Plywood
These cherry plywood panels offer excellent strength, dimensional stability, and screw holding ability. Ideal for projects where shrinking, warping, swelling, or splitting are a concern. All are high quality A2 grade precut plywood panels with both faces in cherry. All panels measure 24"W x 48"L, and are available in 1/4" and 3/4" nominal thicknesses.

Features:
  • Excellent strength and dimensional stability
  • Ideal when you want to minimize shrinking, warping, swelling, or splitting
  • Cross bands are made of Lauan veneer
  • Great screw, nail, glue and staple holding ability on the face; mechanical fasteners do not hold as well on the butt edges and ends
  • Use for wall coverings, drawer sides and bottoms, and a wide variety of case goods such as desks, kitchen cabinets, fixtures, and fine furniture
  • Sanded first with a 120 grit belt and then following with a 150 grit belt which eliminates burnishing and preps the surface for finishing
  • There is an additional $10.00 shipping charge per piece for this item.
(1) 24" x 48" Sheet of Cherry Plywood
More Information
Weight 11.0200
Tech Spec Item #44133:
  • Thickness: 1/4"
  • Dimensions: 24" x 48"

Item #49690:
  • Thickness: 3/4"
  • Dimensions: 24" x 48"
Prop 65 WarningWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
3.4 / 5.0
19 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
7
4
2
1
5
Very nice high quality veneers
The quality of veneers used on this plywood was top notch! I sealed it first with General Finishes Seal-a-Cell, then three coats of General Finishes Arm-r-Seal (Semi Gloss). The figure and chatoyance were spectacular!
Cherry plywood top and sides. Ambrosia maple drawer fronts.
Cherry ply top
March 17, 2019
Woodworking Experience:
Advanced
I bought a 1/4" 2 X 4 piece of plywood to finish a project.
The wood grain was beautiful and the plywood was a true 1/4" not 7/32"
was very pleased with the piece aqnd also with rockler
December 24, 2018
Purchased
5 months ago
Woodworking Experience:
Advanced
Cherry Plywood
Could not be any happier.
Just what I wanted and needed.
April 6, 2018
Purchased
1 year ago
Woodworking Experience:
Intermediate
Super product at a favorable price
Frankly, I was surprised that the plywood had two finished cherry sides. I ran out of solid cherry for our China cabinet and needed the plywood to finish the back. The grain and color of the plywood, when finished with Enduro Var, perfectly matched the solid cherry. Thanks for a surprisingly well made and matched product. It was a exactly what I needed!
October 3, 2017
Purchased
1 year ago
Woodworking Experience:
Advanced
The wood was in excellent condition and it's really great wood to work.
June 21, 2016
Purchased
over 2 years ago
Woodworking Experience:
Advanced
cheery plywood
very good quality,nice match to my cherry trim
February 25, 2016
Purchased
over 3 years ago
Woodworking Experience:
Advanced
Got exactly what we payed for
High quality wood, and would not hesitate to buy again.

The one defect, which was beyond their control, was that one corner had been damaged during shipping. Conveniently, I didn't need the entire width.
July 31, 2015
Purchased
over 4 years ago
Really nice, but only 23" or so of the 24" width is good
The panel is beautiful ... the good side is definitely A1 and the other side is not A1 but it's quite nice. The only problem is that the banding used to hold the plywood sheets on their pallet cut into the sheet so there were 4 spots where the edges of the panel got crushed in about a 1/4 inch or so. I didn't need the full 24" width, so I just cut the edges off, and it was not a problem for me. If you need the full 24" width along the whole sheet, this would be a problem.
April 14, 2018
Purchased
1 year ago
Woodworking Experience:
Intermediate
smooth and flat
Needed thin cherry for the back of a project. Didn't want seams to show. Ordered . Product arrived in 5 days. All four corners damaged by USPS. Didn't deliver. Had to go to P.O. and pick-up. Cut away damage and it worked quite well. Very flat, took stain well no defects in surface would use again. Very nice match to my cherry material.
March 12, 2017
Purchased
over 2 years ago
Woodworking Experience:
Intermediate
Good stuff
This will do the job just fine. The quality is good and what I expected from the order.
October 13, 2016
Purchased
over 2 years ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 8 questions Browse 8 questions and 43 answers
Why did you choose this?
Rockler Store
To make a curved table for a customer
Stephen W on Jul 22, 2018
My project plan called for this item.
Richard H D on Mar 24, 2018
To make a curved table for a customer
Stephen W on Jul 22, 2018
This is a repeat buy. I was favorably impressed with the quality of the veneer on my first buy so I am confident that this will also be a good piece.
Mark on Jun 22, 2018
My project plan called for this item.
Richard H D on Mar 24, 2018
only needed 24 X 48 piece and the price on this is very reasonable.
Mark on Mar 23, 2018
need to complete project doors
James S on Feb 4, 2018
Cabinet work
Steven B on Jan 21, 2018
Cabinet project
EDWARD K on Nov 11, 2017
Building Furniture (China Cabinet)
JEFF B on May 31, 2017
Needed to complete a project- a cherry and walnut desk for my granddaughter.
Sim G on Feb 21, 2017
to finish a special project
steven b on Jan 23, 2017
Stability of Plywood vs solid wood was primary reason. Saves glueing up several pieces of solid wood to make appropriate size panel.
V. Thomas W on Jan 6, 2017
project
richard b on Jan 1, 2017
Shaker style panels
mark s on Nov 16, 2016
Used as cabinet backing for two different style cabinets.
David H on Sep 19, 2016
school project
Laura Z on Apr 19, 2016
scroll saw projects
Amelia T on Apr 11, 2016
sons school project
maryann h on Mar 9, 2016
building a book case
Duane B on Dec 26, 2015
Building a printer cabinet
Clarence R on Dec 8, 2015
Building tabletops - this will be the center, I'll wrap it with padauk.
Jerry T on Oct 16, 2015
right size and great quality product. Have purchased previously.
Donald C on Aug 17, 2015
I chose this item because it will make a beautiful guitar with a rich full sound!
Darrell P on Jul 8, 2015
dressers
Derrick P on Jul 6, 2015
This is a repeat buy. I was favorably impressed with the quality of the veneer on my first buy so I am confident that this will also be a good piece.
Mark on Jun 22, 2018
only needed 24 X 48 piece and the price on this is very reasonable.
Mark on Mar 23, 2018
What kind of core is in plywood?
Danny B on Sep 12, 2015
BEST ANSWER: I do not know what species of wood was in the core, but it was solid , no voids. I was very happy with the piece I got, used it for the lid and bottom of a box I built, both sides of piece where beautifully grained .
does the grain travel in the 48 inch direction or 24 inch direction?
Jim H on Mar 1, 2017
BEST ANSWER: Jim,
The piece of plywood I received had grain in the 48 inch direction. Very well made, and fit my need.
Steve
Is the interior plied or chip board? Looks like chip board on sample.
don't have one. on Jun 16, 2017
BEST ANSWER: the 3 boards I received were 7-ply, good quality boards. Good veneer quality, I was quite happy with them. Expect to lose about 1/2 inch on each side to shipping dings. Few if any surface imperfections.
Can this product wrap around an arc with a 4' radius?
Capella F on Aug 16, 2016
BEST ANSWER: I doubt it. You'd have better luck trying to bend 1/8" plywood that has an MDF core than any 1/4" thick plywood. Also it is slightly easier to bend plywood successfully across the grain than with the grain. So grain direction
How thick is the veneer?
Aro E on Apr 30, 2016
BEST ANSWER: Not sure. I only sanded it lightly, and it never went through. I have used this product in the past and have always been satisfied with it.
How thick is the 1/4” cherry plywood?
Bill D on Jul 7, 2018
BEST ANSWER: My digital micrometer reads the actual thickness as 13/64ths.
Will Rockler cut plywood like big box stores?
Victor L on Nov 4, 2017
24'' x 48'' Cherry Plywood
24'' x 48'' Cherry Plywood
24'' x 48'' Red Oak Plywood
24'' x 48'' Red Oak Plywood
24'' x 48'' Walnut Plywood
24'' x 48'' Walnut Plywood
24'' x 48'' Maple Plywood
24'' x 48'' Maple Plywood
BEST ANSWER: I doubt that they will. However, if you live close to one of their stores they may.
More Suggestions