$29.99
Each
In stock
Not for use as a safety device. Always use appropriate eye protection.
Dust Right® Lathe Chip Deflector
Attaches to the Lathe Dust Collection System (#52981, sold separately) to help deflect chips away from the turner and into the dust scoop.
Item #
52151

The Rockler Lathe Chip Deflector helps to redirect chips and debris away from the turner's hands, arms, torso and face. When positioned correctly, the chips are guided into the dust scoop on the required Dust Right® Lathe Dust Collection System (#52981, sold separately). The result is less mess and less time needed to clean up after turnings. The deflector attaches to the post on yourLathe Dust Collection System via a sturdy steel attachment arm that is height adjustable with the included 3-star knob. From the attachment arm, an 8'' articulating arm lets you position the shatter-resistant polycarbonate deflector in front of the workpiece, and angle it for optimum effectiveness.
(1) Dust Right® Lathe Chip Deflector
Brand | Dust Right |
---|---|
Weight | 1.1500 |
Tech Spec |
|
4.6 / 5.0
10 Reviews
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Very nice
Helps direct the chips to the Dust Collection System scoop and is addition protection for any wayward chips.
- Was this review helpful? Yes (3) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (3) No (1)
- Flag as Inappropriate
Needed as I always forget my safety glasses and it's always there.
Great it's saved my eyes many a time
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Lathe Chip Deflector
Does an excellent job of keeping the chips from blowing back on you when turning. Nice adjustable gooseneck. I'm happy with it.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (2)
- Flag as Inappropriate
Awesome accessory
I found this deflector shield to be very useful. It actually increased the efficiency of my Dust Right Lathe Collection system. Keeps chips and sawdust off of me to a great extent.
- Was this review helpful? Yes (6) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (6) No (0)
- Flag as Inappropriate
Dust Right® Lathe Chip Deflector
Keeps the chips out of the eyes
- Was this review helpful? Yes (4) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (4) No (0)
- Flag as Inappropriate
Dust Right® Lathe Chip Deflector
Good idea but I wish it was a little larger
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
somewhat helpful
I purchased the shield to assist the Dustright dust collector since it only was effective in collecting dust from sanding. It did very little in chip removal. It was hoped that the shield would deflect chips back into the scoop, but it did not. The limitations caused by the attachment of these devices to my lathe negate any benefit from either item. I can not recommend either items and regret the purchases.
- Was this review helpful? Yes (2) No (2)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (2)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More


More Suggestions