VIEW
53326
$119.99
Each
In stock
Reaches through narrow openings to hollow out vessels and vases—rotatable, replaceable carbide cutter provides a sharp edge.
The swan neck shaft of our Carbide Hollowing Tool is specially contoured for making blind cuts and undercuts inside of turned vessels. Like our other carbide turning tools, it features a replaceable, rotatable cutter that does away with the hassle and downtime of sharpening. Just rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges are dull. Ideal for beginning to advanced woodturners, ensuring quick success without the frustration of dull tools, and without the need to invest in sharpening equipment.
Features:
- Contoured swan neck reaches inside of turned vessels to hollow and smooth the inside surface
- Solid carbide cutter stays sharp for longer when compared with steel for a longer useful life
- Shaft features a flattened back for stability when using the tool rest
- Handle is made of solid ash encased in thick, molded rubber end for enhanced grip and reduced fatigue
(1) Full-Size Ergonomic Carbide Turning Tool, Hollowing
(1) R1 Carbide Cutter
(1) Wrench
(1) R1 Carbide Cutter
(1) Wrench
| Brand | No |
|---|---|
| Manufacturer Part Number | No |
| Weight | 1.6000 |
| Tech Spec |
|
| Technical Documents | No |
| Type | No |
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.govWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
4.0 / 5.0
2 Reviews
I truly have no problems with the tool. However, since this is my first of its kind for me, I could use a good tutorial and tool rest recommendation for its use. The Rikon standard rest for the Midi lathe is too small and without a flat surface the tool rolls. It would be nice to know I need a different tool rest for best results.
Still getting used to the tool, but can say on the few occasions when I did get it positioned just right it worked great.
Still getting used to the tool, but can say on the few occasions when I did get it positioned just right it worked great.
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
Works well. No issues. Nice tool.
Works very well.
- Was this review helpful? Yes (24) No (2)
- Flag as Inappropriate
- Was this review helpful? Yes (24) No (2)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 5 questions
Browse 5 questions
and 15 answers
Why did you choose this?
Rockler Store
My teenage grandson has become a rather good turner, and wants to be more creative with bowl turning. I hope this tool allows him to do that.
Robert C
on Sep 18, 2018
I've been looking for a hollowing tool for sometime. Saw this Rockler carbide. I have used their other carbide and thought it might what I was looking for.
John H
on Dec 9, 2017
My teenage grandson has become a rather good turner, and wants to be more creative with bowl turning. I hope this tool allows him to do that.
Robert C
on Sep 18, 2018
Son-in-law has a wood lathe and has started making wooden bowls. Though I would give him some encouragement with this new tool.
Richard W
on Mar 1, 2018
Is the back side flat to help with the side torque?
How deep can this hollow? How large is the curved section? How thick is the steel shank section?
BEST ANSWER: ive went up to 3 inches/ 2in./ 1/2 in, I really like it it works great
- Reply
- Inaccurate
- albert r on May 15, 2018
- Purchased on Sep 26, 2017
Will a ci3 carbide fit this tool?
BEST ANSWER: No. The bit number that fits the tool is stamped on the bit.
- Reply
- Inaccurate
- Tanja D on Apr 14, 2018
- Purchased on Oct 8, 2017
Cost of the replacement cutters and how are they packaged?
BEST ANSWER: The cost of the replacement cutter is $24.99 and they are packaged individually.
Here is a link
http://www.rockler.com/round-carbide-mini-turning-tool-replacement-cutter
Here is a link
http://www.rockler.com/round-carbide-mini-turning-tool-replacement-cutter
- Reply
- Inaccurate
- Rick H Staff on Sep 14, 2017
Frequently Bought Together
-
Pen-Turning Ergonomic Carbide Turning Tools, 3-Piece SetSpecial Price $109.99 Regular Price $139.99
More Suggestions