Laguna Tools Cyclone Dust Collector D|Flux:3

Featuring a 3HP motor and large cast-aluminum impeller, this high-efficiency two-stage cyclone dust collector draws an impressive 1,941 CFM—enough air movement to handle large networks of ductwork. Three 4'' dust ports covering an 8'' main inlet provide plenty of connection options. A large, pleated canister filter screens out dust particles as small as 1 micron. The 45-gallon steel drum is amply sized for long work sessions, and its plastic bag liner is held in place with a unique hose-assisted negative pressure system that keeps it from pulling loose as it fills. Two air struts on the drum lid handle make it easy to lift the lid when servicing the drum, and it rolls on four swiveling casters for convenient emptying. Four swiveling, locking casters also let you move this large machine around easily without a helper. 

Laguna Tools Cyclone Dust Collector D|Flux:3 Details:

• Powerful two-stage cyclone develops 1,941 CFM to keep a demanding home shop running smoothly
• Pleated canister filter traps fine dust particles down to 1 micron
• Internal paddle system with handle simplifies filter cleaning without removing it
• Use the three 4'' dust ports for connecting individual machines, or plumb the collector's 8'' inlet into a large trunk line for branching off to a series of machines with blast gates
• Unique negative-pressure bag retention system holds the plastic liner in place inside the drum and keeps it open during filling; this feature's hose quickly attaches and detaches from the drum with four powerful magnets
• 45-gallon capacity steel drum rolls on four casters
• Swiveling, locking casters keep dust collector mobile
• Air-strut assisted handle makes drum lid easier to raise for emptying drum
• Wireless RF remote controls on and off functions from anywhere in the shop

Click for printable Dust-Management Guide