$79.00 Each
In stock

Magswitch® Workholding System Starter Kit

Item #
38007
Rating:
98% of 100

The Starter Kit is the practical way to get started in the Magswitch Workholding System! Complete with Universal Base, two Mag-Jig 150s and the Reversible Featherboard. The Starter Kit features a reversible featherboard attachment that mounts to the base and can be used on either side of the blade. The two Mag-Jig 150s are removable and can also be used in your own jigs and fixtures.


Features:
  • Holds stock for controlled ripping, routing, shaping, jointing and more
  • Fast setups with precise positioning
  • Small footprint makes it ideal for use with small tables, band saws and fences
  • Can be used anywhere on your table or fence (steel or cast iron)
  • Accepts all Magswitch Workholding System accessories – expandable system gives you a multitude of shop possibilities
  • Magswitch Vertical Featherboard Attachment with Risers (#38487, sold separately) is recommended to add a dimension of dual work hold
Best Used With:
  • Universal Track for Magswitch Workholding System (#38553, sold separately)
  • Magswitch Ultimate Thin Stock Jig/Rip Guide Attachment (#36835, sold separately)
  • Magswitch Dual Roller Guide Attachment (#22189, sold separately)
  • Magswitch Resaw Guide Attachment (#29514, sold separately)
  • Vertical Featherboard Attachment with Risers (#38487, sold separately)
(1) Universal Base that is compatible with a variety of Magswitch products
(1) Reversible Featherboard for left and right stock feeds
(2) MagJig 150s for a magnetic grip that keeps the base firmly in place
More Information
Brand Magswitch
Manufacturer Part Number 8110134
Weight 2.2500
Tech Spec N/A
Tech Docs N/A
Prop 65 Warning WARNING This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
4.9 / 5.0
18 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
16
2
0
0
0
Great shop tool
I use it on my tablesaw bandsaw and my jointer. It holds the piece is tight against the fence‘s
August 6, 2018
Purchased
3 months ago
Woodworking Experience:
Advanced
PERFECT SOLUTION
Great solution for safety and precision. very easy to use
May 9, 2018
Purchased
5 months ago
Woodworking Experience:
Intermediate
Magswitch
Very strong and versatile
Mag switch to bolt down stock guide on tablesaw fence
Mag switch to bolt down stock guide on tablesaw fence
December 22, 2017
Purchased
9 months ago
Woodworking Experience:
Beginner
Great !
I immediately used the 2 magnet units by themselves to anchor a long board while cutting it to length with skill saw. I'm looking forward to buying the other items for this starter kit. Note: you need to offer these other items too.
November 30, 2017
Purchased
10 months ago
Woodworking Experience:
Intermediate
Works great
These I will recommend and I usually do not rate anything unless I hate it.The magnets hold great. I was holding down and against the fence ripping 45's on melamine and I was very happy with the results
September 28, 2017
Purchased
1 year ago
Woodworking Experience:
Advanced
I like it, very easy to use!
September 6, 2017
Purchased
1 year ago
Woodworking Experience:
Advanced
I use these a lot and have adapted them to protect my hands from coming in contact table with the table saw blade.
August 11, 2017
Purchased
over 2 years ago
Woodworking Experience:
Intermediate
Better Fit and Finish
With Magswitch work holding system, you have more control of the work piece thru the table saw. The feather board provides the side pressure and this allows you to be on top of the piece with appropriate saw safety techniques. I have a Gripper system from Micro Jig to provide even top down pressure. Eliminates saw marks from piece. I recommend both these products, for better fit results and keeping the fingers!
June 15, 2017
Purchased
1 year ago
Woodworking Experience:
Intermediate
Magswitch a Winner
This is my first experience with a Magswitch product and to date it has been highly satisfying. I just finished a project where I had to constantly change the position of the feather board and the Magswitch made it an absolute breeze. Cut my task time considerably and held firm every time. I have several home made jigs in mind that will have high utility using the the two switches. Would recommend this device without hesitation.
February 1, 2017
Purchased
1 year ago
Woodworking Experience:
Advanced
MagSwitch Starter Kit
Solid holding power & ease of attachment. Looking forward to making up a couple of jigs that utilize these switches.
October 27, 2016
Purchased
1 year ago
Woodworking Experience:
Intermediate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 34 answers
Why did you choose this?
Rockler Store
Saw it on a Woodsmith tip, watched the video and have several applications that it would work on.
Robert L on Aug 11, 2018
Needed a feather board that didn’t rely on the channels in the table saw top.
Bill P on Nov 15, 2017
Saw it on a Woodsmith tip, watched the video and have several applications that it would work on.
Robert L on Aug 11, 2018
Safety on power tools
Ross G on Jun 20, 2018
Needed a feather board that didn’t rely on the channels in the table saw top.
Bill P on Nov 15, 2017
Safety and price
Jeffrey P on Sep 19, 2017
Husbands wish list
Kathryn K on Sep 12, 2017
Read about the mag switches and wanted to try one. Decided to buy the other attachments at the same time.
EDGAR B on Aug 30, 2017
Ease of use and unlimited applications
DUANE E on Jun 4, 2017
Safety and precision
James C on May 24, 2017
for safety and help in ripping and resawing
Stevie P on Mar 16, 2017
I NEEDED IT
DONALD D on Feb 5, 2017
Table saw work
Randy G on Jan 22, 2017
To enhance shop safety.
Leo T on Jan 14, 2017
on his xmas list
JEANNE L on Dec 13, 2016
Excited about getting to use the Magswitch Workholding System in my shop as there are always times when you could use some additional stability with your project piece and I hope this system will help in that regards.
Jeffrey M on Nov 11, 2016
Like magnet assisted tools
DICK O on Jul 24, 2016
Need it for base for "Ultimate thin stock attachment".
Paige M on Jul 10, 2016
Safety and convenience
Fred R M on May 1, 2016
For making safe and precise rips on my tablesaw.
Landon C on Apr 20, 2016
to add jigs to my table saw and band saw
Sawdust PawPaw on Apr 12, 2016
Nice and strong holding power.
mouse on Mar 30, 2016
Hear lots of GOOD stuff on this. Have it NOW an it's GREAT. Should have gotten it sooner.
ROBERT W on Jan 18, 2016
I have bought this jig and all the attachments. It is a great gadget to have around when the time is warranted. I highly recommend it if you have cast iron tables with your machinery!
Julie B on Jan 11, 2016
Gift.
Joe R on Jan 1, 2016
Works as advertised. I keep it on the table saw.
EARNEST R on Dec 13, 2015
Christmas present request.
Raymond T on Nov 14, 2015
Christmas gift
Bernita B on Nov 9, 2015
wanted to try it out - works well
Myrland G on Nov 6, 2015
Safety factor.
Michael P on Sep 30, 2015
Mag switch product.. what more do i need to say?
Raja A on Jul 29, 2015
I purchased this because of the separate mag switches that can be used on homemade jigs. I already own one the mag fences and was impressed by how solidly it holds to a work surface.
Barry M on Jul 28, 2015
Birthday gift
BRUCE M on Jul 24, 2015
I needed to hold a board down on my table saw and make a consistent quarter inch dado in it. I made a metal auxiliary fence also.
Brad D on Jul 17, 2015
I've witnessed the power of these magnets, and it is impressive. Combined with the starter kit, this is the perfect purchase.
Clark on Jun 10, 2015
already have the fence
Daniel A on Apr 15, 2015
Safety on power tools
Ross G on Jun 20, 2018
Safety and price
Jeffrey P on Sep 19, 2017