Rikon 13-326 Bandsaw Mobility Kit with Foot Pedal
Just step on the pedal to raise your bandsaw onto casters for easy movement around your shop!
Rikon's 13-326 Bandsaw Mobility Kit makes it easy to move your Rikon bandsaw around the shop, and fix it firmly in place when it's time to cut. Perfect for small shops, where space is limited and the ability to move things around is crucial. Just step on the pedal to raise it onto casters. The pedal caster swivels, allowing you to easily steer around obstacles and position your saw close to the wall when needed. Once lowered, the metal feet keep it in place for stable cutting. The Mobility Kit fits the 10-324*, 10-324TG*, 10-325 and 10-326 bandsaws.
|Manufacturer Part Number||13-326|
first the wheels don't roll well.
second the door to the storage cabinet didn't open far enough to use the storage area properly because it banged into the wheel.
I placed the wheels on the other end thinking it would solve the problem, then the door only opened a few inches. I shimmed the door up about 1/4 inch and put a spacer on the wheel shaft, now the door opens.
I noticed the cabinet base holes are further from the edge on one side and suspect that if I had built the cabinet from the other side it might clear the door, BUT I built the cabinet exactly according to the directions, Someday when I am really bored maybe I will break down the saw and rebuild from the other side and see if that works.
7 months ago