$99.99 Each
In stock
Floor Sweep and Bench Nozzle let you clean up in comfort, while the Quick Change Handle and Tool Port let you connect to a stationary power tool.

Dust Right® 4'' Quick Change Shop and Tool Set

Item #
53733
Rating:
70% of 100

The Dust Right Quick Change Shop and Tool Set lets you quickly tap into the two primary uses of the Quick Change system: shop cleanup and dust collection. The Floor Sweep and Bench Nozzle attach to the Quick Change Handle for fast, convenient cleanup, and the handle also slips onto the Tool Port for dust collection at a power tool. The long floor sweep encourages good posture, rides smoothly on rubber wheels, and features a removable grate to filter out large chunks. The Bench Nozzle takes the dust clouds out of sweeping off your benchtop, since dust goes directly into your collector. The beauty of the system as a whole is that instead of permanently plumbing each of your power tools for dust, the Quick Change Handle lets you move a single hose from machine to machine. You'll be able to use a smaller, less expensive dust collector, and with no need for permanent ductwork, your machines can stay mobile. Just keep the handle attached to the 4'' hose on your dust collector and you can move from task to task like never before.


Features:

  • Sweep rolls smoothly on rubber wheels
  • Removable grate in sweep filters out large chunks that could damage the impeller in your dust collector (Note: Turn off your dust collector when removing the grate)
  • Bench Nozzle provides extended reach and features brushes for removing caked-on dirt and dust
  • Large, rugged ergonomic handle has two connection points for far greater strength
  • Angled design of handle lessens strain on the hose, and lessens wrist fatigue caused by the weight of the hose
  • Air flow adjustment valve on handle lets you reduce air flow to prevent floor mats and other items from sealing off the opening
  • Four spring clips let you hang the cleanup tools on the wall for convenient access
  • Tool Port features a flexible rubber boot on one end that guarantees a tight connection and allows for slight variations in the size of the tool's dust port
  • Additional Dust Right Tool Ports sold separately for connection to multiple power tools
(1) Dust Right® Quick Change Floor Sweep
(1) Dust Right® Quick Change Handle
(1) 4'' x 36'' Extension Wand (2 pieces with splice)
(1) Removable Grate
(1) 4'' Tool Port
(1) Bench Nozzle
(4) Spring Clips with Mounting Screws
More Information
Brand Rockler
Weight 9.2000
Tech Spec
  • Compatible Hose Diameter: 4''
  • Floor Sweep Wand Length: 36'' (assembled)
  • Floor Sweep Width: 9''
  • Material: Polymer
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

Prop 65 WarningWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
3.5 / 5.0
32 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
14
6
2
3
7
4" Dust Rite Kit
Excellent fitment, works good!
July 6, 2019
Purchased
3 months ago
Woodworking Experience:
Intermediate
Works aw well as advertised. I recommend this product.
Reaches entire shop, yet out of the way when not in use.  Works great.
Reaches entire shop, yet out of the way when not in use. Works great.
March 23, 2019
Purchased
6 months ago
Woodworking Experience:
Advanced
A must in a work shop
Works well
January 25, 2019
Purchased
8 months ago
Woodworking Experience:
Intermediate
Great for shop clean up
Great kit with the essentials for cleaning up shop after a sawdust slingin session. Easily switch from cleaning benchtops to the floor and everything gets stored away nicely with the included brackets.
User submitted image
Added Jun 28, 2018
June 29, 2018
Purchased
1 year ago
Woodworking Experience:
Intermediate
everything you need
it's very handy to have large scale clean up tools to get the things the machine ports don't.
June 6, 2018
Purchased
1 year ago
Woodworking Experience:
Intermediate
Outstanding gear for my shop.????
Love it.
March 31, 2018
Purchased
1 year ago
Woodworking Experience:
Advanced
Great way to keep the place clean
Love it , the shop is so much cleaner and less hose sitting around
February 24, 2018
Purchased
1 year ago
Woodworking Experience:
Intermediate
Vac tools
Great tools
February 12, 2018
Purchased
1 year ago
Woodworking Experience:
Intermediate
Dust right
Awesome product highly recommend
December 19, 2017
Purchased
1 year ago
Woodworking Experience:
Intermediate
Excellent accessory
Great accessories for dust collector
Uses this morning to clean shop vac filter just attach reducer and clean fine dust out of filter
Also great to use dust collector for vacuum
August 2, 2017
Purchased
over 2 years ago
Woodworking Experience:
Beginner
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 54 answers
Why did you choose this?
Rockler Store
For shop cleanup
Joe P on Sep 2, 2019
Hoping to speed up moving from one operation to another.
Ken W on Mar 27, 2019
For shop cleanup
Joe P on Sep 2, 2019
Setup vac system
Robert S on Jul 26, 2019
Hoping to speed up moving from one operation to another.
Ken W on Mar 27, 2019
Replacement for item damaged in fire.
Stanley S on Mar 26, 2019
To clean my shop.
Jason L on Mar 21, 2019
Seems overpriced for what it is, but seems to be the best value for cleaning up while using the same hose system to go from tool to tool.
NATHAN R on Mar 15, 2019
general clean up and quick change attachment to downdraft table
Joseph P on Mar 8, 2019
Good rating.
Jon H on Mar 5, 2019
Need something better than the shop vac to clean up the shop after making a mess.
Jason H on Feb 24, 2019
Improve my clean up process
Ron A on Feb 3, 2019
Good price at 40% for a nice starter set
Andy B on Jan 3, 2019
I needed a more ergonomic way of vacuuming my shop
Tim P on Jan 3, 2019
Wanted a 4” connector and a sweep, only option was $20 for 2 connectors, I figured a floor sweep and hand sweep was the better deal.
Mark S on Jan 3, 2019
This will make my shop easier to clean up.
Dale B on Jan 2, 2019
Tired of dragging 4" hose around to clean up all the sawdust ! ! >_<'
H E on Jan 1, 2019
my old stuff from you is broken
R Scott S on Jan 1, 2019
will work good with the new collection system that i am setting up
james s on Dec 31, 2018
Needed the tool set to complete hose and handle cleaning attachment
Bruno B on Dec 29, 2018
Easy clean-up
JOHN C on Dec 29, 2018
4" hose capacity
The price was right.
Paul E on Dec 27, 2018
I need it
Kathleen S on Dec 27, 2018
Right tool for the right job.
Keith S on Dec 26, 2018
New option for cleaning shop
Kenneth W on Dec 26, 2018
I have the 21ft hose and need this kit to vacuum the shop floor.
zach v on Sep 12, 2018
need for cleaning shop floor
James E O on Jul 19, 2018
for the reason they were designed -- to make clean up easier.
JERRY E on Jun 21, 2018
help with easy clean up
Michael S on Apr 25, 2018
I own an old version of this and it is pretty worn out. This also seems like a better version. The old version wasn't sturdy and had other issues.
Paul R. B on Mar 31, 2018
Expanding Workshop.
Morris S on Jan 12, 2018
Christmas gift for my husband
CAROLYN on Dec 12, 2017
I wanted to improve the dust collection in my shop and feel that these tools will help.
Elaine B on Dec 11, 2017
Make cleaning sawdust from floor easier
B A on Nov 27, 2017
Small shop dust collection solution
Todd W on Nov 25, 2017
Vacuum tool kit for a 4" dia dust collector.
Nigel D on Nov 19, 2017
I have a dusty shop
David E on Oct 27, 2017
because they break so frequently I need to replace them and it is not my money
Christopher D on Oct 6, 2017
Better cleanup and price reduction
Ronald B on Sep 1, 2017
So I can easier clean up my shop which is in my garage.
Lynn J on Aug 3, 2017
To use with Jet Dust Collection, clean floor and bench. with Quick Change Handle and Dust Ports (2.5 & 4.0) can easily move dust collection from machine to machine as well. Dont have hoses running every where and no need for a complex series of blast gates.
Steve M on Jul 27, 2017
use for woodshop clean up
Doug M on Jul 16, 2017
for a clean shop
Margaret H on Jul 14, 2017
to utilizes the 4" expandable hose
James N. B on Jun 5, 2017
will help with floor and bench cleanup and quick connect makes switching from tool to tool easier
stanmcmct on May 14, 2017
To keep my workshop clean with ease
Myriam V on May 3, 2017
To attach to my dust collector for garage cleaning
King on Apr 24, 2017
Sweeping my shop with a broom added more dust in the air, I would rather vacuum. It does a nicer job.
Neal H on Apr 9, 2017
I need it...BAD
Stephen A on Mar 20, 2017
To have the ability to use my dust collection system to vacuum the floor.
Keith W on Mar 19, 2017
to make clean up in my shop easyer
Charles V on Mar 15, 2017
Setup vac system
Robert S on Jul 26, 2019
Replacement for item damaged in fire.
Stanley S on Mar 26, 2019
Are the Rockler supplied adapters suppose to fit inside the 4” Dust Right expandable hose? The ones I bought won’t fit inside the hose!
Steve R on Jan 3, 2019
BEST ANSWER: they need to redesign the whole system. I am not satisfied with most of it
Will this work with the #22643 Dust Right Handle?
Andrew W on Aug 7, 2017
BEST ANSWER: Yes, I have purchased 2 additional for different tools.