Store Locator
Special Price $25.49 Each $29.99 Each
In stock

Get Expert Advice

Return Policy

Dust Right® 4'' Quick Change Tool Set

Lets you quickly transfer a single 4'' dust collection hose from tool to tool—ports fit tools with 4'' dust ports.
Item #
52594
Rating:
90% of 100

The Dust Right Quick Change Multi-Port Tool Set lets you quickly move a single 4'' dust hose from tool to tool, eliminating the expense of permanent ductwork and a large dust collector. The set includes our Quick Change Handle, which is left attached to your dust hose, and a pair of 4'' Tool Ports, which attach via hose clamps to the dust ports on your tools. Once the Tool Ports are installed, the handle slips on and off quickly. The 4'' Tool Ports are ideal for larger tools like table saws, jointers and planers. Just keep the handle attached to the 4'' hose going to your dust collector and you can move from task to task like never before. With no need for permanent ductwork, your machines can stay mobile, an important aspect of any small shop.


Features:

  • Large, rugged ergonomic handle has two connection points for far greater strength
  • Angled design of handle lessens strain on the hose, and lessens wrist fatigue caused by the weight of the hose
  • Air flow adjustment valve on handle lets you reduce air flow to prevent floor mats and other items from sealing off the opening
  • Tool Ports feature a flexible rubber boot on one end that provides a tight connection and allows for slight variations in the size of the tool's dust port
(1) Dust Right® Quick Change Handle
(2) 4'' Tool Ports
More Information
Brand Rockler
Weight 2.4500
Tech Spec
  • Compatible Hose Diameter: 4''
  • Compatible Dust Port Diameter: 4''
  • Material: Polymer
4.5 / 5.0
88 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
61
16
6
2
3
So easy to change from table saw, to router and to bandsaw. Cleanup is so easy connecting to dust collector.
4 inches to 2.5 adapter
Connection to dust collector
Handle connection used for 4 inch  hose .
June 30, 2020
Purchased
1 month ago
Woodworking Experience:
Intermediate
Great Solution
I'm in-between solutions for dust collection. I have a powerful dust collector, but can't install a duct system until I complete some mechanical changes in my basement. This allows me to quickly connect and disconnect my dust collector to the device I am using. This goes on so easily and connects so well that I never worry about the connection.
June 14, 2020
Purchased
2 months ago
Woodworking Experience:
Intermediate
Great for hooking up tools on mobile bases
I use the kit to switch between joiner, planer, and bandsaw. Quick and easy.
April 6, 2020
Purchased
1 year ago
Woodworking Experience:
Advanced
This is a handy fast way to hook up tools to the dust collector. I see all kinds of possibilities with this.
April 3, 2020
Purchased
3 months ago
Woodworking Experience:
Advanced
seems to be a great product.
April 2, 2020
Purchased
4 months ago
Woodworking Experience:
Intermediate
dust rite quick coupler
got it yesterday. put it to work rite away. works great. easy hookup and disconnect. recommend it for a small shop.
March 22, 2020
Purchased
4 months ago
Woodworking Experience:
Intermediate
The tool ports fit my router table, jointer, planer, and bandsaw, which all had different outside dimensions! Using the Quick Change Handle is awesome!
March 19, 2020
Purchased
4 months ago
Woodworking Experience:
Intermediate
Works like a charm
Great way to easily swap tools connected to the dust collection system.
March 19, 2020
Purchased
4 months ago
Woodworking Experience:
Beginner
Easy transfer
Makes it easy to move my dust collector from tool to tool.
March 7, 2020
Purchased
4 months ago
Woodworking Experience:
Intermediate
Great product
This made working in my shop nicer. I was able to hook up more tools.
March 4, 2020
Purchased
5 months ago
Woodworking Experience:
Intermediate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 10 questions Browse 10 questions and 64 answers
Why did you choose this?
Rockler Store
Need it for the shop
James P on Jul 5, 2020
Already have one set and it works great. Less expensive to buy another complete set, rather than buy two the two tool connectors I need separate.
Steve H on May 28, 2020
Need it for the shop
James P on Jul 5, 2020
quick
Doug J on Jun 23, 2020
Already have one set and it works great. Less expensive to buy another complete set, rather than buy two the two tool connectors I need separate.
Steve H on May 28, 2020
I have a small shop and I move the DC hose from machine to machine as needed, and I want secure and easy-to-use friction fit DC connections.
Kevin K on May 19, 2020
setting up my dust collector, and I'm using rockler fittings, already have one dust right handle love it.
Harvey S on May 18, 2020
purchased the Dust Right 750 CFM Mobile Dust Collector
ttimothy f on May 11, 2020
it will make tool connection easier
Gerald S on May 7, 2020
I needed this for my joiner/planer.
Mark on May 4, 2020
This is a simple and quick solution to getting my dust collector's vacuum to my power tools. I'm not ready to install a fixed tubing system, and this is a great tool that has other uses in the shop as well.
Ed on May 3, 2020
suggested by a friend
Alan F on May 2, 2020
Having these handy will cut down my next project waiting time.
Victor K on Apr 30, 2020
Connect to the bandsaw and an extension hose, replace the old style handle which broke.
K E on Apr 29, 2020
tired of dealing with hose clamps changing hoses from one piece of equipment to another
Greg G on Apr 27, 2020
The system works well and is easy to use
Ross D on Apr 22, 2020
Saw it on Stumpy Nubs
David M on Apr 14, 2020
Much easier than fighting with clamps and slipping on and off each machine
Christopher P on Apr 4, 2020
needed 2 more 4<br />' ports
John B on Apr 3, 2020
Love the idea of not having to worry about clamps and just how quick it will be do go from 1 tool to the next.
AJ C on Mar 2, 2020
To make multi machine use a little less hectic
JohnC on Feb 29, 2020
Needed an extra handle and adapters
Ben S on Feb 27, 2020
easer to use than what I already own.
Rocky M on Feb 26, 2020
Easy quick change tool to leave on
Jarrod F on Feb 26, 2020
Versatile
Patrick M on Feb 25, 2020
They were recommended by a friend. They will make my job easier. They will make my job faster.
Marshall S on Feb 23, 2020
just looking to try it
Joe H on Feb 23, 2020
time saver!
S O on Feb 15, 2020
I use these products in my shop because of efficiency.
Stephen F on Feb 15, 2020
Adding more equipment
David R on Feb 8, 2020
need connections
lawrence v on Jan 27, 2020
I think it’s what I need. I wish there was a break down if what goes to what to connect to vac. System and how the hose connect. I see now I believe I will need hose clamps which I did not think of. I’ll grab them from Home Depot.
Glen O on Jan 23, 2020
The old design handle cracked, I hope this one is designed better (heavier)
J U on Jan 19, 2020
Too easy to use!
David S on Jan 17, 2020
for quick connecting to tool ports
William L on Jan 17, 2020
For quick change between machines
Jay on Jan 7, 2020
Quick change to down draft table
David E on Jan 3, 2020
Positive review on woodworking show
John G on Jan 2, 2020
Looking for an easy disconnect for my shop. Tired of hose clamps trying to fit tight hoses onto ports, and cannot afford a dedicated
Fred C on Dec 27, 2019
i like it
mike h on Dec 19, 2019
I am tired of having to unscrew the clamps on my machine.
Douglas P on Dec 16, 2019
for the ability to quick change between machines
John S on Dec 4, 2019
Make quickly change form tool to tool easy.
Jeff on Nov 24, 2019
too many tools and hard to run hoses all over my tiny shop
William C on Nov 10, 2019
easy to switch between machines.
Michael B on Nov 2, 2019
Provide more flexibility in clean-up.
John C on Nov 1, 2019
Quick changes of tools.
Oscar H on Oct 5, 2019
Easy to switch machines
Stephen B on Sep 27, 2019
It allows me to move my table saw around as I have a small shop and trying to make it efficient
Charles ( Chuck ) K on Sep 19, 2019
Perfect bundle of component for what I need
Michael L on Aug 15, 2019
Need to connect 4" hose to multiple roll around tools.
Joseph T on Jul 14, 2019
Needed the 2 quick disconnect adapters and thought it would be good to get another handle too.
Milo H on Jun 20, 2019
quick
Doug J on Jun 23, 2020
I have a small shop and I move the DC hose from machine to machine as needed, and I want secure and easy-to-use friction fit DC connections.
Kevin K on May 19, 2020
How do I connect my Dust Right Universal Small Hose Kit to my 4" system?

I purchased the Small Hose Kit to connect up to my Dewalt Drop Saw to my Jet Dust Extraction, but am missing a connector to get from the 2 1/4 OD of the Small Hose Kit to the 4" on the Jet, or even the Quick Change Handle. Any advice greatly appreciated.
Nick S on Oct 8, 2017
Dust Right® 4'' Quick Change Tool Set
Dust Right® 4'' Quick Change Tool Set
DeWALT DW716 Heavy-Duty 12'' (305mm) Double-Bevel Compound Miter Saw
DeWALT DW716 Heavy-Duty 12'' (305mm) Double-Bevel Compound Miter Saw
Jet® Vortex Dust Collector 1.5HP w/Bag Filter
Jet® Vortex Dust Collector 1.5HP w/Bag Filter
Dust Right FlexiPort Power Tool Hose Kit, 3' to 12' Expandable
Dust Right FlexiPort Power Tool Hose Kit, 3' to 12' Expandable
Can the tool port be used to attach directly to the dust collector port, to have quick connections at both ends of the hose (dust collector and tool) assuming I buy two handles?
Chris W on Jan 7, 2017
BEST ANSWER: Sure, if it has a 4 inch outlet. The port side connectors are flexible enough to fit on a 4 inch pipe as well as an outlet port.
Will the flexible rubber boot on the tool port fit over 4" PVC drain pipe?
Glenn E on Jan 14, 2017
can I buy additional tool ports separately?
Steve B on Mar 31, 2017
BEST ANSWER: You can get a box of two: Rockler Dust Right® 4'' Tool Ports If you need to use the handle for a floor cleaning system, you'll need to order the sweeper stuff and then the tool ports. The floor sweeping system can't be purchased without the handle.
Is this compatible with a Sawstop professional cabinet saw?
Dan C on Jun 24, 2018
BEST ANSWER: I am not sure, I bought 1 quick change toolkit and need to move it to each machine. To save on the male end I created a form and changed the diameter of 4 inch PVC. to make them work. If you search 'your home workshop' channel on youtube there is a good tutorial on doing this. Use enough wax to get off the form, you can get a perfect air tight fit.
Do the tool ports snugly fit the Rockler Router Table dust bucket?
Brian M on Aug 1, 2019
BEST ANSWER: I don't own that particular item, however, I have been able to hook mine up to multiple tools with standard 4" ports. (planer, drum sander, table saw, disc/belt sander). I can easily switch from tool to tool.
Why do I need a Tool Port instead of just connecting the Quick Change Handle directly to the existing port on the tool (like a Dewalt DW734 planer)?
David D on Nov 21, 2017
BEST ANSWER: You need tool port ,due to the Inside diameter of the quick change handle and the outside diameter are slightly different ,hope this helps
The tool port dia is 4". The inside dia of the non-hose end is 4.25 and fit tight over the fixed dust ports. How does this handle fit the 4" tool port?
Buck on Dec 10, 2017
BEST ANSWER: It is Rockler magic that the parts fit well. Seriously, they are designed to fit together.
Can anyone share the I.D and O.D. of the tail end of the Multi Port Tool?
Mario G on Mar 30, 2017
BEST ANSWER: OK here it is , you'll have to do the fractional or metric conversions. Hose end 3.975 outside, 3.651 inside. pickup end, 4.432 outside,4.252 inside. The adapter the this plugs unto , 4.16 outside, 3.93 inside
all measurements in decimal inches
Hope this helps
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

Prop 65 WarningWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
More Suggestions