Store Locator
Grouped product items
Product Price Qty
Rockler Easy-to-Grip 5-Star Fence Knobs, 5/16''-18 Threads
Rockler Easy-to-Grip 5-Star Fence Knobs, 5/16''-18 Threads Item #50035
In stock
$9.99 Pair
Rockler Easy-to-Grip 5-Star Tall Fence Knobs, 3/8''-16 Threads
Rockler Easy-to-Grip 5-Star Tall Fence Knobs, 3/8''-16 Threads Item #55561
In stock
$9.99 Pair
Rockler Easy-to-Grip 5-Star Tall Fence Knobs, 1/4''-20 Threads
Rockler Easy-to-Grip 5-Star Tall Fence Knobs, 1/4''-20 Threads Item #58063
In stock
$9.99 Pair

Get Expert Advice

Return Policy

Rockler Easy-to-Grip 5-Star Fence Knobs

Save your knuckles with these ultra-tall fence knobs, featuring the same comfortable shape and construction as our other Easy-to-Grip knobs.

Item #
GRP40882
Rating:
94% of 100

Our extra-tall knobs rise above most fences, giving your fingers plenty of room to loosen and tighten them without bruising your knuckles. As tall as they are, they're easily accessible from any side, meaning less legwork to set up your machines. Perfect for router table fences, drill press fences and band saw fences, where their ergonomic shape and comfortable materials make them a pleasure to use. They truly must be felt to be appreciated.

Features:

  • Ultra-durable construction with comfortably molded gussets
  • No sharp edges—rubber overmold extends beneath the knob for total comfort and easy tightening
  • Extended-length insert for extra thread durability

  • (2) Rockler Easy-to-Grip 5-Star Tall Fence Knobs
More Information
Brand Rockler
Tech Spec
  • Material: Polymer with thermoplastic rubber (TPR) overmold
  • Insert Threading: 5/16''-18 / 1/4''-20 / 3/8''-16
  • Overall Height (Projection): 4-7/16''
  • Overall Width: 2-1/4''
4.7 / 5.0
128 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
110
7
4
3
4
nice to have a knob that's extends out.
Purchased these to make jigs. I may get more of these to replace the knobs on my router table fence.
April 4, 2020
Woodworking Experience:
Advanced
Just what I needed
I needed these to replace two of the knobs on the back upright portion of my router table's fence (for the sliding fence faces), as the dust port made them difficult to reach. I removed the flared piece at the foot of the stem, and ground down the star so it would clear the table, and they work brilliantly.
A little modification and these knobs make it easy to get at those pesky adjustment knobs.
A little modification and these knobs make it easy to get at those pesky adjustment knobs.
March 11, 2020
Woodworking Experience:
Intermediate
Great idea, but
These work really well, as all other reviews indicate. However one of the 4 I purchased is defective and the thread insert came out while trying to tighten the knob to the router fence. I was not over tightening, just trying to get it to grip and tighten normally. I repaired it with super glue, but I think the inside of the plastic part is now stripped and I'm not sure anything will repair it completely.
December 31, 2019
Woodworking Experience:
Intermediate
Rockler Easy-to-Grip 5-Star Tall Fence Knobs, 1/4''-20 Threads
These would be great if they were threaded completely through. I also bought the t-bolts to go with the knobs and they would only thread in about 3/8" - 7/16" into the knob. I tapped the remaining threads and the knobs work OK now but I would not recommend them based on this experience.
May 13, 2020
Woodworking Experience:
Intermediate
Poor Design 5 star fence knobs 1/4"-20
Very disappointed in the design and quality of these knobs! Threaded inserts pulled out the first time I used them.
Made a test cut and proceeded with the cut for my work piece when the fence moved ruining the piece.
Like the height and hand grip capability but the design needs improvement!!
Definitely would not recommend this product!!!
May 28, 2020
Woodworking Experience:
Advanced
defective product/poor quality control
Totally disappointed in the quality of these knobs. I purchased the 1/4"-20 knobs online. Unfortunately, the threaded insert on one was put in crooked and the threads were deformed. The second also had mangled, deformed threads. Both knobs were initially unusable. I managed to salvage one by cleaning up the threads with a rethreading tool. Unfortunately, the second one was not salvageable; my rethreading tool broke inside the knob.
April 16, 2020
Woodworking Experience:
Intermediate
Response from Rockler
Thank you for taking the time to let us know about the issue that you encountered. I apologize for your inconvenience. Please contact Rockler Customer Service at 80-279-4441 to discuss replacement of the defective knos.
April 17, 2020
David
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov