WARNING: Cancer & Reproductive Harm - 
VIEW
GRP30731_1
In stock
105 degree stop hinge-2 inches long (50.8mm), steel with nickel, oil rubbed bronze, or brass finishes, includes mounting hardware.
Finish your project with a Jewelry Box Stop Hinge that is both durable and distinctive! This sturdy 105° hinge is an economical alternative to other hinges, easy to affix, and comes with all mounting hardware.
(1) Pair of 105 Degree Stop Hinges
| Weight | 0.0600 |
|---|---|
| Tech Spec |
|
| Open Degree | 105 |
| Finish | Brass, Bronze, Nickel, Oil Rubbed Bronze |
3.8 / 5.0
24 Reviews
Works great
Looks good works well good price...What's not to like
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Stop Hinge
Works perfectly for jewelry box construction
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
Its a nice hinge but not strong enough for my jewelry armoire lid. I'll use these on a smaller project that is coming next.
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
Excellent product Excellent price.
The 105 degree stop hinge is perfect for the wooden keepsake/jewlery boxes that I have been making. There's no chain or deep mortises to deal with, the finish is durable and consistant. The price is right just what a woodworker needs.
- Was this review helpful? Yes (4) No (0)
- Flag as Inappropriate
December 3, 2013
- Was this review helpful? Yes (4) No (0)
- Flag as Inappropriate
Wanted to share a tidbit about how to set them
I noticed a review mention that the leaves are slightly offset, thus making setting your lid square/flush difficult. I haven't used these shorter hinges yet, but have used the 8" variety and they have an offset as well.
There is a pretty easy way to compensate for this. Cut your mortise in one piece -- lid or body, doesn't particularly matter. Then set the lid down with the sides flush to the box. Mark both ends of the other leaf using a marking knife on the non-mortised piece of your box. Take the hinge off the piece that is already mortised. Line up the ends of the leaf on your newly made marks, and trace the hinge. Now cut your second mortise using that outline. Hope this might help future users!
There is a pretty easy way to compensate for this. Cut your mortise in one piece -- lid or body, doesn't particularly matter. Then set the lid down with the sides flush to the box. Mark both ends of the other leaf using a marking knife on the non-mortised piece of your box. Take the hinge off the piece that is already mortised. Line up the ends of the leaf on your newly made marks, and trace the hinge. Now cut your second mortise using that outline. Hope this might help future users!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
They were exactly what I needed for the small box I built. Perfect! And that it only opens 105 degrees was even better.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Inside stop hinges
I like the hinge ok I wish it was available in different finishes also It would be nice to have inside stop hinges in smaller size The high priced hinges are just too costly to put on the small boxes that I make. OOP's I just noticed you offer different finishes THE SMALLER SIZE say an inch or a little longer would be nice
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Work very Well
These are a little trickier to install than the single 8" long hinges, but when I need to span a longer box length I have used these. Look nice and don't require a lot of work to install. I hate some of the fancier hinges that require a router etc. When I am this close to finishing a box I hate to take a chance on screwing it up routing out a pocket for a hidden hinge.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Stop feature is nice. Otherwise it's just an inexpensive hinge.
I like the hinge and will use it again because the 105-degree stop feature works well for my application (and it was available in Antique Bronze; my wife doesn't like brass). But otherwise it's just a cheap thin-plates hinge. I prefer thicker plates that close to the same dimension as the barrel (ala Brusso) but that would be a much more expensive hinge.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Great hinge for the price.
I bought these hinges for a project that has a heavy lid. I was' t sure they would stand up to the task but they work really well.
Just remember to pre drill the holes for the screws first.
Just remember to pre drill the holes for the screws first.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 5 questions
Browse 5 questions
and 8 answers
Do the antique brass stop hinges come as a pair? The other finishes all state pair.
BEST ANSWER: Yes they do. The detail of quantity is just an oversight on behalf of Rockler.
- Reply
- Inaccurate
- Lisa W on Apr 7, 2015
- Purchased on Dec 2, 2014
How wide are these hinges?
BEST ANSWER: These hinges are approx 1" wide overall - just under 1/2" each side.
- Reply
- Inaccurate
- ALAN D on May 6, 2015
- Purchased on Apr 3, 2015
There is an oil rubbed bronze hinge, but the photo looks like it's black. I actually want the black hinge, so which is it...oil rubbed bronze or black?
What size are the screws that these hinges use?
BEST ANSWER: #2-1/2 which are generally not stocked. I use #4-1/2 when I need a replacement screw.
- Reply
- Inaccurate
- Ted G on Jun 9, 2015
- Purchased on Dec 3, 2014
I have two wooden music boxes made in Italy both have 105stop degree hinges .one has a 7 inch with 4 holes on each side. And the other has a 5 inch with 3 holes on each side. I can't find them anywhere ,do you have any ideas?? If so I need them preferrably in brass.thank you for any help you can give.
Frequently Bought Together
More Suggestions