Store Locator
QTY

Get Expert Advice

Return Policy

Rockler 48'' Universal T-Track with Hold-Down Clamps

Stacked-groove design allows you to attach a wide range of accessories.
Item #
25736
Rating:
96% of 100
This combo package includes a 48" length of our new anodized aluminum Universal T-track, plus two hold down clamps (each including one hold down, one 3" T-bolt, and one 5-star knob). Additional hold downs are available separately below. This kit makes a great addition to our Drill Press Table!

Features:
  • Hold down clamps accommodate material up to 2-1/2" thick.
  • Our Universal T-track features a unique "stacked" T-slot that accepts both 5/16" T-bolts and 1/4" T-bolts, as well as 1/4" Hex-bolts, allowing you to attach a wide range of accessories.
  • Aluminum T-track is easy to cut to length.
  • Star knobs hold clamps firmly in position.
(1) Length 48" Universal T-track, anodized aluminum
(2) Hold down clamps
(2) 5-Star Knobs
(2) 3" T-Bolts
More Information
Brand Rockler
Weight 3.2000
Length 48"
Track Type Universal
4.8 / 5.0
96 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
80
14
2
0
0
A review from someone who doesn't write reviews.
Rocklers T Tracks and accessories are in a word - awesome! In fact, to date everything I've purchased from Rockler has been exactly what I expected and in many cases exceeded my expectations.

To boot, their customer service is excellent. My only request is Rockler open a store in the New Orleans area!
Totally awesome worktable w/ Rockler T Tracks, Clamps, Bench Cookies & more - great quality!
Used the Rockler Up-Cut Sprial Router Bit for the bench holes - highly recommend!
September 30, 2019
Purchased
2 months ago
Woodworking Experience:
Advanced
Stepping Up
Fantastic purchase and I also got the aluminum flip stop. Installed them onto my radial arm saws fence. Should have done this years ago. Replaced the saws standard table with 1” polypropylene sheet and inserted 22” of track on a 45 degree angle to assist in set ups and hold down clamps.
September 29, 2019
Purchased
2 months ago
Woodworking Experience:
Advanced
Exceeded expectations. Great shop addition
Great addition multiple tracks save many clamps
Great addition multiple tracks save many clamps
September 26, 2019
Purchased
2 months ago
Woodworking Experience:
Intermediate
First rate. Used it on a table for my drill press.
September 24, 2019
Purchased
2 months ago
Woodworking Experience:
Intermediate
Great addition to the shop
I use these all the time. Great for holding down a piece when sanding or using a router. I probably will be ordering more.
September 20, 2019
Purchased
2 months ago
Woodworking Experience:
Intermediate
Great product, a little over priced though.
September 16, 2019
Purchased
2 months ago
Woodworking Experience:
Intermediate
48" T-Track with 2 Clamps
I bought this value priced sales item to make a drill press jig. The pieces made the construction an easy job. I now have a safer, more accurate set-up for my drill press. The T-Track is easy to cut to length as needed.
September 12, 2019
Purchased
2 months ago
Woodworking Experience:
Intermediate
ROCKLER TIE DOWN CLAMPS
GREAT PRODUCT AT A BETTER PRICE THAN I FOUND ON LINE EVEN THRUOGH AMAZON.
September 10, 2019
Purchased
3 months ago
Woodworking Experience:
Intermediate
Good Stuffs
I am in the process of making a sled for my table saw and these little guys came in very handy. Relatively inexpensive but you should not base your decision on the cost.
September 10, 2019
Purchased
3 months ago
Woodworking Experience:
Intermediate
Great Track, great buy
Got track and clamp package on sale, so it was like getting the clamps very cheap. I used the track on my crosscut sled and that adds safety to cross cutting, particularly with small or short pieces. Probably adds some accuracy as it holds it the same through the cut.
September 6, 2019
Purchased
3 months ago
Woodworking Experience:
Intermediate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 9 questions Browse 9 questions and 66 answers
Why did you choose this?
Rockler Store
Building miter sled for table saw.
Werner V on Oct 20, 2019
Cross cut sled
Dave Conder A on Sep 28, 2019
Building miter sled for table saw.
Werner V on Oct 20, 2019
Making a raised panel jig for my table saw using your products. Liked the clamps and track & price. Thank you and wish me luck!
William H on Oct 7, 2019
Cross cut sled
Dave Conder A on Sep 28, 2019
building a base for my drill press, and table saw sled for building wood toys for grand children
Randy E on Sep 26, 2019
Great products and great customer's relations. Never had a order substandard.
Dean S on Sep 21, 2019
The T-Track added versatility to my workbench and has proven to be a great clamping system for all types of woodworking projects. I use it very frequently.
Stephen T R on Sep 19, 2019
Looks good
Jdblack79 . on Sep 8, 2019
expanding initial install of these, they are a wonderful accessory for my saw bench
John S on Sep 3, 2019
Setting up T-Track System
John W on Aug 29, 2019
for a drill press table
Fred K on Aug 27, 2019
Building a drill press table and it was a good price
Brad Z on Aug 23, 2019
I need to make a nice deck for my sub-par table saw.
Richard A on Aug 11, 2019
Building a jig for shaper origin router
Samuel L on Aug 10, 2019
To enhance the setup of my workbench
B H on Aug 9, 2019
Good buy
Marion C on Aug 6, 2019
Ordered for table saw cross cut sled
Johnathan H on Aug 6, 2019
I bough another brad, red, nowhere as nice as Rockler's!
Ron on Aug 4, 2019
Finishing table
mark gearhart G on Aug 2, 2019
For table saw out-feed table T Track install
Christopher B on Jul 26, 2019
to use with the table saw cross cut sled plans
Johnathan H on Jul 26, 2019
Needed it for Table saw sled.
Oswaldo S on Jul 19, 2019
This items for my shop jigs
John K on Jul 6, 2019
Making an assembly table with T-Track and hold down clamps.
Frank L on Jun 30, 2019
Because I like them
RICHARD K on Jun 28, 2019
building a cross cut/miter sled
James S on Jun 20, 2019
Will be helpful
Ron W on May 20, 2019
Making a drill press table
Bill on May 11, 2019
Great deal for both T-Track and hold down clamps
GEORGE M. on May 10, 2019
Making a new work table with a laminated top ... need hold downs
Larry H on May 9, 2019
I wanted to add these to my work bench to use to hold down the sign boards that I am making
Joe W on Mar 23, 2019
Going on drill press table
Douglas G on Mar 21, 2019
Because they are highly functional and awesome
Michele C on Mar 20, 2019
You always have great products off the wall stuff cannot fined any ware else
Ronald Bailey A on Mar 13, 2019
This is an easy one. I always use jigs and hold downs. I still have all my fingers and this is why. I know the importance of good hold and what it does to secure work while using machinery!
Stephen A on Mar 13, 2019
Making a few different jigs
Barry D on Mar 9, 2019
To finish my chop saw workstation and add the ability to have lock downs and stops.
David M on Feb 25, 2019
to make jig to rip live edge stock
DOUG T on Feb 20, 2019
The Rockler accessory kit I purchased didn't include any hold-downs.
DOUGLAS S on Feb 13, 2019
planning to make a crosscut sled
Karen M on Feb 11, 2019
I have 1 set and needed more for outfeed table/assembly table
Jason on Feb 1, 2019
Building a new cross cut sled for table saw
James O on Feb 1, 2019
To make a crosscut sled
Bret Craytor C on Jan 31, 2019
best price
James B on Jan 31, 2019
Getting started with a new table saw and drill press... add features to the sled that I'm building...
Brendan L on Jan 28, 2019
Goes with the t-track kits we just bought
Leesa T on Jan 24, 2019
needed more track and hold downs
Robert H on Jan 23, 2019
Making a cross cut sled. Kit costs less than ordering the individual parts.
Neil B on Jan 20, 2019
table top work bench
Raymond J on Jan 16, 2019
If the system works like I think it will I will be buying more
Lee M on Jan 15, 2019
Building a new crosscut sled and wanted two more clamps
Phillip S on Jan 15, 2019
Making a raised panel jig for my table saw using your products. Liked the clamps and track & price. Thank you and wish me luck!
William H on Oct 7, 2019
building a base for my drill press, and table saw sled for building wood toys for grand children
Randy E on Sep 26, 2019
what is the width and depth of slot in table top to accomodate the extruded track ? thanks in advance
Jim F on Sep 30, 2015
BEST ANSWER: 3/4" wide x 3/8" deep.
Which hold downs come with the package? The 5 1/2" or 3"?
Jordan B on Oct 30, 2016
BEST ANSWER: The 5-1/2" comes in the package
I have a older 10" craftsman table saw with miter groves that measure .742" +\-. Will this track fit? Does it's actual width measure under .750? .
Cliff C on Mar 25, 2018
BEST ANSWER: The track I received measures 0.746" wide x 0.370" thick. FYI, the track is an aluminum extrusion and extrusion dies will wear (openings enlarge) with usage. If you find its tight, you can always sand or file the sides to remove a few thousandths.
Will these sit flush in 3/4 plywood?
Dwayne F on Jun 28, 2018
BEST ANSWER: Yes, With no problem.
When incoporsting these into a crosscut sled, what distance from the blade on each side is best recommend by those that have built and used them? Thanks
Craig W on Oct 22, 2018
BEST ANSWER: I kept the nearest edge of the track 3.75" from the path of the blade. This will keep the clamps out of the blade regardless of what I put under them or what angle they are to the blade.
Hello - will the hold down clamp work with 1/4-20 T-Track hardware? I have a bunch of Rockler 1/4-20 T-Bolts and knobs.
Brian on Jan 5, 2016
BEST ANSWER: They will if your present t-tracks slot is wide enough. The bolts of this hold down are 5/16th inch . The flat bolt head that slides in the track is slightly more than 1/2 inch wide. ( the narrow side )
do you sell stops that fit the track as well? they are pictured with the hold down assembly...do these clamps take the place of the kreg tool hold down?
mark s on Jan 26, 2016
BEST ANSWER: the stops work just fine. I've used them in a variety of ways with both hand and power tools on saw horses, assembly table, drill press. they work very well.
How much force will the clamps hold and the T track? Thinking about using the track and clamps for a quick change for a single stage reloading press? Do you think it'll be strong enough for that?
ScubaBeau on Sep 25, 2017
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov