Store Locator
QTY

Get Expert Advice

Return Policy

Rockler Stop Kit for Rockler T-Track System

Includes four stops—a pair for each direction—making them ideal for a variety of workholding tasks.
Item #
56600
Rating:
86% of 100

For a versatile starter set, try our T-Track Stop Kit, which includes two Inline Stops and two Short Stops. This kit will get you started using the stops for work holding and light machining applications. The stops feature low-profile knobs that fold flat for tool clearance. Use the Short Stops on one end of the board to hold your work while belt sanding, hand planing, or scraping dried glue. Use the Inline Stops to sandwich a board so you can work in either direction. For light clamping pressure, tap some carpenter's shims between one of the Inline Stops. A third style—the Long Stop—is available separately (#46010).

(2) Short Stops for Rockler T-Track System (50603)
(2) Inline Stops for Rockler T-Track System (54161)
More Information
Brand Rockler
Weight 0.4500
Tech Spec
  • Machined from aluminum for durability
  • Designed to work with our T-Track Table (46654, sold separately), the stops also work with any number of jigs, router tables with t-tracks, and any t-tracks that accept 5/16'' T-bolts and can accommodate the 3/8'' keyway
  • Short Stop measures 1-1/2'' x 1-1/2'', and has a T-slot keyway running parallel to the stop face
  • Inline Stop measures 1-1/2'' x 1-1/2'', and has a T-slot keyway running perpendicular to the stop face
  • All stops are approximately 5/8'' tall with the knob in the down position
  • Low-profile flip-down knobs allow clearance for machining stock as thin as 3/4''
  • 5/16''-18 thread T-bolts hold the stops securely in the T-track
4.3 / 5.0
31 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
19
5
5
2
0
Works great
September 12, 2019
Purchased
3 months ago
Woodworking Experience:
Advanced
Nice clamps for top work where the t-track is close to the work, or an intermediate block can be used
Simple, well made, perform very well.
June 25, 2019
Purchased
5 months ago
Woodworking Experience:
Advanced
Hold downs
This is a very functional bed after the upgraded T-track!
great hold downs
great hold downs
June 1, 2019
Purchased
6 months ago
Woodworking Experience:
Advanced
Be carefull some are vertical some horizontal
May 20, 2019
Purchased
6 months ago
These stops work very well for locating and holding
Material while carving with my CNC router.
Do not have to deal with tie downs.
May 16, 2019
Purchased
7 months ago
Holders
The holders as I call them seemed to work great on holding wood in place.
May 9, 2019
Purchased
7 months ago
excellent product
very quick to set up and holds like a bolder.
February 25, 2019
Purchased
9 months ago
Woodworking Experience:
Advanced
These are great for making quick guides for our CNC
February 14, 2019
Purchased
9 months ago
Woodworking Experience:
Intermediate
stop kit for t-track system
works well
July 9, 2018
Purchased
over 2 years ago
Woodworking Experience:
Beginner
These are fantastic and typical Rocker high quality, but be warned, the protrusion on the bottom designed to keep the stop 90 degrees or parallel does not fit after market t-tracks... A little frustrating, but I still use them constantly...
April 3, 2018
Purchased
1 year ago
Woodworking Experience:
Intermediate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 55 answers
Why did you choose this?
Rockler Store
For use in jigs for tablesaw, workbench, or router table with the T-track system.
Michael R on Nov 8, 2019
For use with assembly pad building wooden model cars and semis.
R W on Oct 16, 2019
For use in jigs for tablesaw, workbench, or router table with the T-track system.
Michael R on Nov 8, 2019
it's a good option to keep my fixture in place
Lonelle D on Nov 8, 2019
For use with assembly pad building wooden model cars and semis.
R W on Oct 16, 2019
I chose this product to help secure pieces on the CNC.
Mark A on Oct 16, 2019
for a special project on my cnc
Ed on Oct 8, 2019
I need these for the T-Track table top
Robert D on Sep 29, 2019
Setting up T track system
Stephan G on Aug 29, 2019
add to existing system
Kelly R on Aug 27, 2019
small projects
Dennis W on Aug 26, 2019
Making a T track assembly table
Chris on Aug 22, 2019
To go along with the T-Track System. Will help a lot with my projects.
Donald C on Aug 21, 2019
Hands free placement
S T on Aug 21, 2019
Exactly what i needed for set up table
William D on Aug 20, 2019
I was looking for something to replace the wooden measuring device that I had made several years ago and my cuts were getting a little sloppy.
Steven U on Aug 17, 2019
I had no clamps only table.
Michael H on Aug 13, 2019
I'm curious to try out this system of products.
Sarah M on Aug 7, 2019
sale
Skeeter on Aug 2, 2019
I want to use these for repetitive drilling on my drill press table
Kelvin C on Jul 11, 2019
This items for my shop jigs
John K on Jul 6, 2019
To use with the cnc router I have ordered
DONALD P on Jun 23, 2019
For my Shapeoko 3 CNC
mrspipah on Jun 15, 2019
New clamps that were supposed to ship with cnc are backordered so chose Rockler to provide quality replacement until the more agressive clamps arrive.
Gerald R on Jun 4, 2019
Starting T-Track collection
Darrell S on May 21, 2019
This is a very simple method to locate and secure items on my CNC table.
Kelly S on May 10, 2019
Keeping project secure during assembly
John S on Apr 29, 2019
clamp phones
Zachary D on Apr 27, 2019
I needed some way to use a t--track and position a board at different heights that will support various power tools in a work bench i am building. So the router needs to be at 15 inches while the miter saw is at 4.5 inches, etc.
David D on Apr 8, 2019
Easy set
KELLY V on Mar 30, 2019
to secure my wood work on the t-track table
ANDREW K on Mar 29, 2019
try make easy for me
LAURENCE J FASS A on Mar 27, 2019
birthday gift for dad
Rich D on Mar 27, 2019
Just completed my new work bench and placing T-track system on top
Michael Z on Feb 20, 2019
These will come in handy for my track system on my RAS.
Billy C on Feb 13, 2019
setting up clamp system
Tom L on Jan 29, 2019
Use with T-track
Joe M on Jan 28, 2019
need
James D on Jan 20, 2019
THE T TRACK TABLE DOES NOT WORK WELL WITHOUT THEM
RAY on Jan 1, 2019
New assembly table
Paul K on Dec 29, 2018
Need additional clamps for my Laguna IQ CNC
Dave F on Dec 26, 2018
Bought the t track top needed hardware to go with it.
Jack on Dec 20, 2018
I am hoping to use these to hold projects and improve my alignment when doing two sided digital carving
Katharine L D S on Nov 28, 2018
When I bought the table top system I bought the minimum number of hold downs and stops. I needed more.
Robert T on Nov 28, 2018
Excellent back stop for small projects on the T Track Table Top
Byron V on Nov 27, 2018
Recently built a t track assembly table. These will come in very handy. Check it out @boticawoodworks
Micah B on Nov 27, 2018
These Rockler T-Track system stops are a must for all wood workers. They help hold your small wood projects in place when used with a clamp.
RAUL L on Nov 26, 2018
To add to the Rockler 17 piece Universal T-Track kit I purchased.
Cary on Nov 26, 2018
For cnc machine
John L M on Nov 10, 2018
replaces bulky 2x4 blocks as stops
James W on Nov 7, 2018
Every project requires a good quick stop to hold it in place.
Kenneth E on Oct 22, 2018
need
Larry R on Aug 20, 2018
it's a good option to keep my fixture in place
Lonelle D on Nov 8, 2019
I chose this product to help secure pieces on the CNC.
Mark A on Oct 16, 2019
Can these be used for centering on a drill press?
Jan M on Jan 22, 2016
BEST ANSWER: There is no reason why they can't. I use them to secure my work from sliding when using a CNC machine. A drill press is nothing in comparison to demand.
Will these work with Kreg Klamp track?
Kent H on Aug 18, 2019
BEST ANSWER: Short answer is I don't know, as I use them with Rockler's T-track. I did make some measurements that might help. The opening in Rockler's T-track is 23/64" wide and the rectangular 'key' at the bottom of each of these stops measures 11/32" wide to fit into that slot. The head of the 5/16 T-bolt is 1/2" wide and 3/32" thick. You can check these numbers against the Kreg track.
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov