$109.99 Each
In stock
Build sturdy, beautiful frame and panel doors with minimal setup and absolute precision!

Rockler Classical Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank

Item #
91991
Rating:
86% of 100
Rockler Classical Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank Rockler Classical Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank Rockler Classical Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank Router Bit Setup Jigs: Rail & Stile
Rockler Classical Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank

Use this rail and stile router bit set to create beautiful door frames for glass panel, flat panel and raised panel doors. Rockler rail and stile bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints. The one-piece cutting edge allows you to achieve a perfect fit without having to disassemble an arbor and install shims. With ball bearing guide, you can even use a template to build doors with curving rails.

  • 5/8" Bearing.
  • 1/4" x 3/8" Groove.
  • K10 and K20 grade carbide for clean cutting action.
  • Final sharpening with 600 - 800 grit diamond wheels.
  • Precision balanced for smooth operation.
  • Baked-on anti-stick coating to reduce pitch and resin buildup.
  • If you are not 100% satisfied with these bits, send them back for a refund.
    (1) Classical Stile and Rail Router Bit Set
    More Information
    Brand Rockler
    Manufacturer Part Number N/A
    Weight 0.5500
    Tech Spec N/A
    Technical Documents Stile and Rail Router Bit Instructions
    Bit Type Stile & Rail
    Diameter 1-3/8"
    Cutter Height 1"
    Shank Size 1/2"
    Flutes 2
    Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

    Prop 65 WarningWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
    4.3 / 5.0
    16 Reviews
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Star
    11
    1
    3
    0
    1
    These bits out performed my expectations, I did over 350 doors of walnut until I had them resharpened.
    July 12, 2018
    Purchased
    7 months ago
    Woodworking Experience:
    Advanced
    Stole and rail
    The set does an amazing job!
    First cabinet door EVER!
    First cabinet door EVER!
    January 28, 2018
    Purchased
    9 months ago
    Woodworking Experience:
    Beginner
    rail and style bit set
    Worked like it was expected
    May 11, 2017
    Woodworking Experience:
    Intermediate
    It's what I expected. Seems like good quality. Cut nice and clean.
    November 7, 2016
    Purchased
    over 2 years ago
    Woodworking Experience:
    Intermediate
    A must have !!! If you are doing a lot of cabinet doors this saves so much time it's so easy to set up and use if you have set up block. The bit is $100 and well worth it. The bit lasts too. I've done a lot of oak and popular doors with it and is still sharp as new.
    August 10, 2016
    Purchased
    over 2 years ago
    Woodworking Experience:
    Advanced
    Great product
    Did exactly what I needed them to do
    April 8, 2016
    Purchased
    over 2 years ago
    Woodworking Experience:
    Advanced
    Router set for babinet doors.
    This is the third set that I have purchased for variable reveals in cabinet doors. Work great. Also recommend the template for setting your router.
    February 28, 2016
    Purchased
    over 2 years ago
    Woodworking Experience:
    Advanced
    Excellent quality
    I'm a novice wood worker and tackled my first raised panel door project recently. I knew Rockler's products were good, so I ordered these. I didn't purchase the setup jigs for the bits so I used trial and error on scrap wood to fine tune the setup. They worked fantastic.
    January 21, 2016
    Purchased
    over 2 years ago
    Woodworking Experience:
    Beginner
    No problems with these. Works well
    January 20, 2016
    Purchased
    over 4 years ago
    Woodworking Experience:
    Advanced
    This was my first set of...
    This was my first set of rail and stile bits and I am not disappointed. The contour of the two bits are identical and they produce good close fitting parts. I purchased the setup block and had no problem setting up the bits. Good addition to my tool set.
    October 7, 2009
    Start typing your question and we'll check if it was already asked and answered. Learn More
    Browse 5 questions Browse 5 questions and 19 answers
    Why did you choose this?
    Rockler Store
    It was a good match to an existing cabinet.
    Robert T on Aug 31, 2018
    Making my first attempt at raised panel doors. Reviews were very positive
    Tim Z on Feb 12, 2018
    It was a good match to an existing cabinet.
    Robert T on Aug 31, 2018
    Rockler router bits are very dependable, long lasting, and cost effective
    Ed C on Feb 25, 2018
    Making my first attempt at raised panel doors. Reviews were very positive
    Tim Z on Feb 12, 2018
    needed for project
    Maureen M on Jan 21, 2018
    making cabinet doors
    James M on Jan 6, 2018
    viewed several YouTube videos of other people using the items. Seemed to be well constructed.
    William G on Dec 19, 2017
    I chose the wrong thing. These not what I thought from your catalog
    Jack C on Jul 29, 2016
    Needed it
    daniel D on Jun 24, 2016
    Had to match an existing profile.
    Larry M on May 14, 2016
    making doors? this set works very well. rails and stiles match very well. just put your panel in and glue them up. make sure your router is good enough to use them though.
    m. c. lowe on Aug 6, 2015
    Seems like a great product
    Gregg R on Jul 8, 2015
    Hope it ships.
    Mario R on Apr 18, 2015
    Rockler router bits are very dependable, long lasting, and cost effective
    Ed C on Feb 25, 2018
    needed for project
    Maureen M on Jan 21, 2018
    What is the maximum material thickness?
    Jim V on Jun 20, 2017
    BEST ANSWER: This bit can be used with up to 1" thickness
    What is the thickness of the groove where the panel fits?
    Tim Z on Feb 12, 2018
    BEST ANSWER: Hey Tim, I don't have the bit on me now to measure exactly but it is close to a quarter inch. Quarter inch ply is a little loose. Hope this helps.
    Will this work for 3/4 thick cabinet doors?
    Robert T on Aug 31, 2018
    BEST ANSWER: Yes ,that is what they are set up for.
    on the groove is it a quarter inch wide and 3/8 deep ?
    homer on Mar 5, 2018
    BEST ANSWER: Yes
    More Suggestions