Blind Shelf Support Bulk Pack, 5 Pairs
Add some decorative flair and wonder to your room with these concealed shelf supports. No visible hardware creates a minimalist look, and grants you a wider range of visual variety and options. The invisible shelf brackets are made of sturdy metal, with alloy steel coupling screws to ensure they maintain tension between the posts and the inserts in the plates. This gives you an impressive capacity of 50 lbs for an 8'' deep shelf up to 34'' long (capacity is higher for shallower shelves). For shelves longer than 34'', simply add additional supports. This package includes five sets/pairs of supports. Each set includes the mating brackets and supports you'll need. You provide the space, the screws and the shelf, then enjoy the added storage and staging space in your living room, bathroom, kitchen, bedroom or office.
- Mounting screws not included. Shelves longer than 34'' will require more than two supports.
|Manufacturer Part Number||No|
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
1 year ago
1 year ago
Keep this in mind when choosing your location. If your wall is bowed substantially, the brackets will not be parallel to one another when coming off the wall. This can make it very difficult for the bracket rods to seat all the way into the shelf holes.
If your wall is not plumb, the brackets won't be level coming out from the wall.
Fortunately, the brackets mount with 2 screws. By tightening and loosening the left/right screws, you can sort of fine tune the direction in which the brackets come out from the wall.
You can tune the levelness of the brackets by shimming behind the top or bottom of the bracket. It takes very little. A business card is enough to push it up or down to level.
You may also have to scribe cut the back of your shelf to get it to sit tight against the wall, but this is the case with any mounting bracket.