Overview
Specifically designed for use with face frames. These fully concealed 35mm face frame hinges offer 3-way cam adjustments for height, side, and depth (#90788 offers only two adjustments). See optional Blumotion Soft Close System for silent and cushioned door closure.
Related Products
We recommend using our JIG IT® Deluxe Concealed Hinge Drilling System with the JIG IT® Hinge Plate Template C to make installation of these hinges accurate and easy.
Questions and Answers
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 21 questions
Browse 21 questions
and 69 answers
Why did you choose this?
Rockler Store
Because they are easy to install and adjust, and the 46 doors I have mounted with these hinges over the past 3 years are still hanging true.
Curt S
on May 9, 2017
The display cabinet I'm making has 3 doors 36" tall and 30" wide with glass inserts so I needed strong hinges to support the weight. There will be 3 hinges on each door.
James E
on Apr 18, 2017
Because they are easy to install and adjust, and the 46 doors I have mounted with these hinges over the past 3 years are still hanging true.
Curt S
on May 9, 2017
Used these hinges for over 15 years while working for Mills Pride Cabinets. Great product that I trust.
Jim M
on May 4, 2017
will this hinge replace the grass 860 hinge for a cabinet door?
Hi, I got the jig it deluxe concealed hinge drilling system. How do the holes in the guide (3-4-5-11mm) compare to the hinges that say 3/8 1/2 3/4" overlay...? Thank you!
Blum® Nickel-Plated Face Frame Overlay Hinges
BEST ANSWER: The numbers on the guide are indicators to the tab. The tab is the amount of material between the edge of the door and the start of the hinge pocket. For the compact hinges it is usually 3 mm.
Make sure you check the instructions for the hinges before you start.
Make sure you check the instructions for the hinges before you start.
- Reply(1)
- Inaccurate
- Rick H Staff on Oct 7, 2015
Is there a way to limit the range of motion with these hinges so they cabinet doesn't open as far?
BEST ANSWER: No, none that I am aware of...
- Reply
- Inaccurate
- Paul M on Aug 31, 2016
- Purchased on Sep 14, 2014
I have cabinets with 3/8" inset doors and would like to replace the existing semi-concealed hinges with concealed euro hinges. Will this hinge work for this application?
BEST ANSWER: Sorry no, if you have a 3/8" inset lipped door edge you would need to use http://www.rockler.com/salice-hinge-and-plate-for-3-8-lipped-face-frame-doors
- Reply(1)
- Inaccurate
- Steve Staff on Jul 8, 2016
I need 5/8" Overlay for my face frame cabinet doors. I would like to use the model number 90788 concealed hinge that you carry will this work? It says vairable ovelay from 1" to 3/8" in the description is this correct?
BEST ANSWER: That model may work for you but I would not guarantee it. I am a Rockler customer but they have a limited selection of blum hinges. I would recommend part number BH130.1100.26 for the 5/8 mounting plate. p/n BH33.3600 for the hinge. You may have to do a search for these part numbers. I hope this will help you.
- Reply
- Inaccurate
- David G on May 15, 2015
- Purchased on Apr 16, 2015
I currently have kitchen cabinets with 5/16" series 1 110 overlay concealed cabinet hinge, wraparound. This is a blum hinge and some are starting to fail. It appears that blum no longer sells the wraparound hinge and says to use compact 33 edge. Can you tell me what hinge I should be purchasing ?
I have the 3/4" thick cabinet doors. and they have a profile around the edge. How far back does the cup hole need to be from the door edge? If less than approx 4mm then the hole looks like it will cut thru the door at the profile. Thanks
BEST ANSWER: 3mm at the closest point. The depth is 11mm, which is just slightly less than 7/16". I believe these are pretty standard numbers for these types of hinges.
- Reply(1)
- Inaccurate
- James M on Feb 1, 2016
- Purchased on Apr 17, 2015
Does the 1/2" overlay mean that the cabinet door will overlay the face frame by 1/2" on the hinge side?
BEST ANSWER: yes normally if you want a half inch overlay you make the door 1 inch larger so you have a half inch all the way around
- Reply
- Inaccurate
- Paul A on Apr 30, 2015
- Purchased on Apr 6, 2015
can you identify the Blum hinge that I need that has the following numbers on it - 30310 11.02, 26 DC, PA66, 5/8" screw and do you have it is stock? Jerry
BEST ANSWER: that would be item #90788. The variable overlay snap closed hinge
- Reply
- Inaccurate
- Rick H Staff on May 23, 2017
We need to replace our hinges. The info is: Blum 30.310-11.02. We need 24. Another number on the hinge is 11A?
BEST ANSWER: I've bought several,and have been satisfied with them each time.
- Reply
- Inaccurate
- SHIG T on May 1, 2017
- Purchased on Jan 9, 2015
How many hinges do I need per door for a door 58" tall and 14" wide...2" maple stiles and rails with 3/16" glass panels?
BEST ANSWER: You could possibly get by with 3 hinges since you have maple stiles which should hold the screws nicely. With a softer wood I would go with 4.
- Reply
- Inaccurate
- RICHARD S on Apr 17, 2017
- Purchased on Apr 30, 2015
I have model 55910 1/2" overlay hinges. I have what I feel is a large gap between cabinet door and stile when closed. I tried adjusting tighter but door edge hits stile. Any suggestions to close gap?
BEST ANSWER: Not much you can do. It's just the way there designed. I started using the more expensive Blum hinges. More money but a much better design.
- Reply
- Inaccurate
- Joseph B on Feb 14, 2017
- Purchased on Apr 19, 2015
I'm using 2 35mm Face Frame Overlay Hinges (part # 90788) to mount 16" (wide) x 34" (tall) door. How far from the door edge do I need to drill my offset holes? The hinges came with no specs.
BEST ANSWER: Instructions are linked in the Technical Downloads section of this web offer.
- Reply
- Inaccurate
- Steve Staff on Oct 10, 2016
What is the distance (center to center) between the screw holes for the door?
BEST ANSWER: the distance between hole on the door is 45mm
- Reply(1)
- Inaccurate
- Rick H Staff on Oct 6, 2016
I have 31329 1 1/4" overlay hinges. For ease of hanging door, it doesn't look like these come apart like some others. What is the best procedure for hanging the door? Install cup first? bracket first?
BEST ANSWER: I have tried both ways, and I think the best results happen when the cups are installed first. I have made spacers for the bottom of the door to make alignment easier. Good luck, Henry.
- Reply
- Inaccurate
- Michael F on Mar 5, 2016
- Purchased on Apr 20, 2015
does blum make anything bigger than 1-1/4 overlay have swollen doors and need little more gap for closing
BEST ANSWER: blum makes overlay hinges up to 1 9/16 and you can buy them at woodworkers hardware
- Reply
- Inaccurate
- gerald the wood butcher on Feb 28, 2016
- Purchased on Apr 12, 2015
What should I use to clean my 15 y/o self closing hinges to restore their self closing ability?
BEST ANSWER: Try using a silicone spray or something that doesn't leave a residue like electronic parts cleaner.
- Reply
- Inaccurate
- Travis H on Jan 7, 2016
- Purchased on Apr 27, 2015
The variable overlay hinges (90788) mount to the face of frame NOT the edge of the face frame correct?
BEST ANSWER: Yes hinge #90788 is mounted to the face of the face frame.
- Reply
- Inaccurate
- Rick H Staff on Apr 8, 2015
I need to replace two old euro style hinges for my existing cabinets but they have 1-1/2 inch overlays - which Blum Hinge Would you recommend?
Looking for a 1/2" overlay hinge like item Blum 55910 but only opens to a max of 95 degrees?
Reviews
4.5 / 5.0
98 Reviews
The design is a good one...
The design is a good one but the manufacturing fails to support the design. The metal is soft and too weak. It is just pot metal and cannot be depended on for more than a few years. We have to have several on hand to replace them as they break. A sadly typical case of profitability over pride.Editor's note. Blum offers a lifetime warranty on hinges. If replacement is needed Blum can be contacted directly at 800-438-6788.
- Was this review helpful? Yes (4) No (0)
- Flag as Inappropriate
July 3, 2011
- Was this review helpful? Yes (4) No (0)
- Flag as Inappropriate
Easy to install, easy to adjust
After buying the right metric Forstner bit and jigs installation was a snap. Face frame alignment was simple and adequate. An overlay adjustment would have been useful but for the price its absence is understandable. Have been functioning perfectly. Self closing feature works fine.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Blum hinges
I use these hinges in my hobby shop cabinet work. Recently I led a group of church men to work on new orphanage buildings in Guatemala. Ease of installation, necessity to work quickly, unknown quality of locally available hardware and ease of adjustment led me to choose this hinge and take them with us. They worked great and the project is beautiful.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
I have used these on many projects with much success.
I would recommend
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Very good replacement for the same hinge which was poorly designed.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Best hinge on the market
Wouldn't use any other brand.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Great hinges.
The hinges installed easily. They work as advertised. This was the second set I have used and I would use them again. The adjustments are very helpful.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Blum overlay hinge
Looks professional and any cabinet door adjustments can be
made easily with this hinge
made easily with this hinge
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
