$1,249.99 Each
Additional Shipping Charge: $85
Direct Ship

Jet® 13'' Planer/Molder with Closed Stand

Item #
22041
Rating:
80% of 100
Jet® 13'' Planer/Molder with Closed Stand Jet® 13'' Planer/Molder with Closed Stand
Jet® 13'' Planer/Molder with Closed Stand

The JET JPM-13CS 13" Closed Stand Planer / Molder boasts a 1.5 HP motor. The sturdy cast iron table and base provide strength and reduce vibration during use. The Three cutter head design produces a superior finish. Built in lockable caster add support and stability to the machine while allowing it to be maneuverable.


Features:
  • Cast iron table and base provide strength and reduce vibration during use
  • Four precision-ground column design feature adds stability when raising and lowering the table
  • Three cutter head design produces a superior finish in either application
  • Two speed gear box has feed rates set for optimum planning and molding results
  • Molding cutter head accommodates over 40 standard molding cutter sets; most 2" or smaller heads can be installed without removing the planning knives to save you set-up time
  • Infeed and outfeed rollers are adjustable and rubber-coated to support your workpiece without marring the wood
  • Top-mounted height adjustment handle is easy to use for quick table height changes
  • Totally enclosed fan-cooled 1-1/2HP motor uses two matched V-belts to deliver smooth, consistent power to the cutter head
  • Exclusive angled 4" dust port keeps the dust hose out of the way while providing efficient chip and dust removal
  • Built-in lockable casters add support and stability to machine while in use
  • Knife-setting gauge for planing
  • Knife-setting gauge for molding

Additional Planing Features:
  • Three-knife cutterhead design produces a superior planed finish
  • Cutterhead features knife jacking screws for easy, accurate adjustment

Additional Molding Features:
  • Three-cutter design and extra slow feed rate produce ready-to-use molded stock
  • Most 2" or under cutters can be installed without removing the planing knives
  • Over 40 standard molding cutter sets are available. Custom made cutter sets are also available for a wide variety of applications
  • Special gauge is included to assist in proper setup of molding cutters
  • There is an additional $85.00 shipping charge for this item.
  • Ships directly from the manufacturer.
  • Must be shipped within 48 Contiguous United States.
  • Estimated Delivery time: 15 business days.
  • 15% restocking fee on all returned merchandise.
  • Please call customer service before returning product.
(1) Jet® 13'' Planer/Molder with Closed Stand
More Information
Brand Jet
Manufacturer Part Number 708524
Weight 258.0000
Tech Spec
  • Model Number: JPM-13CS
  • Height: 41"
  • Width: 24"
  • Length: 25"
  • Maximum Planing Width: 13"
  • Maximum Planing Thickness: 6-1/8"
  • Minimum Planing Length: 14"
  • Cutterhead Speed: 4500 RPM
  • Cutterhead Diameter: 2-9/16"
  • Cuts Per Minute: 13500
  • Feed Rate - Planing: 20 FPM
  • Feed Rate - Molding: 10 FPM
  • Number of Knives: 3
  • Dust Port Diameter: 4"
  • Motor Power: 1-1/2 HP
  • Motor Voltage: 115/230 V
  • Prewired Voltage: 115 V
  • Motor Current: 15/7.5 A
  • Motor Phase: 1 Ph
Technical Documents
4.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
2
0
0
0
nice machine
Works well, was easy to set up. Knives needed adjusting, the rest was fine. The video, however, was outdated, copyright 1995. lol looked even older and was completely irrelevant. I contacted company and was given a very curt reply. It soured my experience enough that I will not consider another Jet machine for the foreseeable future.
January 18, 2018
Purchased
10 months ago
Woodworking Experience:
Intermediate
The planer moulder works as expected....
The planer moulder works as expected. Having 2 speed feed rate helps. I have found that the faster rate works very well and hardly ever use the slower feed rate. Having 3 blades makes it a lot more expensive to buy and doesn't seem to do that much better than the 2 blade machines. I would have to think a long time before I bought one again. I have never used the moulder part of the unit. So I maybe wasted some money on that part of the unit. Yet all in all it a very good unit, having caused no problems at all. Much better than the 2 blade units that I have used in the past.
December 16, 2012
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions Browse 4 questions and 3 answers
Why did you choose this?
Rockler Store
I was looking for a closed stand 115V planer, this one is expensive, but I like the name jet. We'll see how I like it when I put it to work.
Austin F on Jan 14, 2018
I was looking for a closed stand 115V planer, this one is expensive, but I like the name jet. We'll see how I like it when I put it to work.
Austin F on Jan 14, 2018
What is deal with helical blades and do they work with this unit please? Are they really better?
BGR1960 on Nov 25, 2016
How difficult is it to change the cutter head on the jet jpm 13 cs planer/molder?
preacherman on Feb 23, 2016
BEST ANSWER: I have watched some videos on youtube and the changing of knives look pretty easy.
Where can the JPM-13CD Planer knives be purchased? Does Rockler carry them?
Bill P on Oct 28, 2016
BEST ANSWER: These knives can be purchased on the Jet website. Rockler does not sell them at this time.
can a ripsaw be added to this unit?
alexander on Jan 23, 2017
BEST ANSWER: If you know how to weld, use a milling machine, are very good with math and engineering and have a very intuitive mind, yes, I suppose it could.
More Suggestions