VIEW
38162
$249.00
Each
In stock
This mobile base makes moving the rugged Sawstop® PCS Professional Cabinet Saws (sold separately) an absolute breeze, and does so without compromising any of the stability and rigidity so desired in cabinet saws of that caliber. In fact, it's built so tough that it requires no additional support for saws with the longer 52" fence. Give the foot pedal three quick pumps, and the saw is lifted onto four sturdy, rotating casters. A light press on the release lowers the saw so that it rests firmly on the ground, not the casters, ensuring excellent stability while sawing.
Features:
- Compatible with the Sawstop PCS Professional Cabinet Saws (sold separately)
- Mobile base supports both saw and extension table-no need for separate framework for the 52" extension table.
- Two swiveling casters and two fixed casters provide mobility in any direction
- After lowering, the saw rests directly on your shop floor, not on the casters, so its weight is transferred directly to the floor
- To raise the saw, pump the foot pedal three times
- To lower the saw, lightly trip the release
- Constructed from fully welded solid 1/4" steel with a black powder coat finish
- High performance full ball bearing casters
- No International shipping available on SawStop items. SawStop items can only be shipped within the Continental United States.
- SawStop, the SawStop blade logo, and the configurations of SawStop products are either registered trademarks or trademarks of SawStop, LLC and are used with permission.
(1) SawStop Professional Table Saw Mobile Base (MB-PCS-000)
| Brand | SawStop |
|---|---|
| Manufacturer Part Number | MB-PCS-000 |
| Weight | 19.5500 |
| Tech Spec |
|
4.4 / 5.0
25 Reviews
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Great table saw for the money.
It is great. Hook it up to a 31/2 horse power shop vac. Could about 36 inches of 3/4 inch lumber and swipe up about a small hand full of saw dust. Easy to move around.
They say it is best to have two people to put the saw together. If you have patients and are mechanically inclined it is possible to do like I did put it together by yourself. I did.
I did have a safe company bring the Saw to the house and put it in the basement because it is too heavy for one person to do.
The only accessory that I would like to be able to find is a clamp for the miter gauge. They did Drill and tap it for one.
They say it is best to have two people to put the saw together. If you have patients and are mechanically inclined it is possible to do like I did put it together by yourself. I did.
I did have a safe company bring the Saw to the house and put it in the basement because it is too heavy for one person to do.
The only accessory that I would like to be able to find is a clamp for the miter gauge. They did Drill and tap it for one.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Good purchase
I purchased this when I ordered the Sawstop table saw. It works well and I was glad someone in the rating section mentioned doing this upfront when assembling the table saw.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Awesome tablesaw. Great engineering.
Great tablesaw. Ease of assembly. Accurate right out of the box.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Best part of the saw
No one has enough shop space-- but I build really big scenery in a really small shop. The mobile table base is worth it's weight in gold for being able to make a bunch of rip cuts and get the table out of the way.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
SawStop
I had a serious injury with my old table saw. I would recommend this table saw to all levels of woodworkers. It is expensive but so are your fingers. All the power you should need in a home shop. Also very easy to set depth and width. Perfect straight cuts once you have everything adjusted. Recommend the overhead dust collector.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
After injuring my left thumb twice on my old saw I decided it was time to upgrade my 1985 contractor saw to a new SawStop Professional Model with a 36" fence and a 1.75 hp motor. No regrets with this purchase.
The staff at the Rockler Store in Cincinnati are knowledgeable and were very helpful with my decision.
The saw assembly was straight forward, with very understandable instructions, most of tools required were provided which was very helpful. The saw out of the box required no adjustment, I made a slight adjustment to the fence. I'm an old car guy and used the nickle test to prove my work after a tune up. I stood a nickle on edge and turned the saw on and the nickle never moved, the saw is vibration free. Try it you will be as amazed as I am! I demonstrate this to all who visit my shop. The saw deserves a 5+ star rating!
The staff at the Rockler Store in Cincinnati are knowledgeable and were very helpful with my decision.
The saw assembly was straight forward, with very understandable instructions, most of tools required were provided which was very helpful. The saw out of the box required no adjustment, I made a slight adjustment to the fence. I'm an old car guy and used the nickle test to prove my work after a tune up. I stood a nickle on edge and turned the saw on and the nickle never moved, the saw is vibration free. Try it you will be as amazed as I am! I demonstrate this to all who visit my shop. The saw deserves a 5+ star rating!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
How much money is your hand worth?
When I was looking to replace my tablesaw I was leery about spending that much money, after a lot of thinking and again My better judgment I did purchase the sawstop. About four months after I purchased the saw I had an unfortunate accident while I was Cutting some wood for a cedar chest that I was making for my granddaughter. The sawstop saved my left hand. I ended up with a small cut on my finger that just took a Band-Aid. No matter how safe you are accidents happen! How much money do you Thank your hand is worth?
How much is your finger work?
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
it works great! even on my unlevel floor
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 5 questions
Browse 5 questions
and 34 answers
Will this work on the right side of a SawStop 3HP saw with the 36" extension table? I'd like to put it where the not-cast-iron extension table is. I see a previous answer about the dust shroud location, but that appears to be on the left side.
SawStop Professional Table Saw Mobile Base
BEST ANSWER: It does fit, however the rip fence rail on the SS will block the mitre slot on the router table. Also it makes it so heavy on that end, so it's not safe to move on the mobile base. I had mine like this for awhile, and then put it on the left side, and I'm much happier with it there.
- Reply(1)
- Inaccurate
- William A on Feb 18, 2017
- Purchased on Aug 18, 2015
Will this base work with the sawstop 10 inch professional cabinet saw model number CB 31230?
BEST ANSWER: THE BASE I PURCHASED WITH MY SAW WORKS NICE . I HAVE NOT HAD TO USE IT MUCH. TO COMPLETLEY ANSWER YOUR QUESTION CONTACT SAWSTOP DIRECT I HAVE USED THEM SEVERAL TIMES THEY WERE RIGHT ON POINT WITH THERE ANSWERS AND EVEN ASSISTED IN RESOULVING THE FEW PROBLEMS I HAD.
- Reply
- Inaccurate
- Leon S on Feb 29, 2016
- Purchased on Apr 3, 2015
How is the saw shipped? How heavy is the base. How heavy is the table?
BEST ANSWER: Louv1:
Thank you very much for your interest in SawStop! The Professional Cabinet saw is, as Skip M says, shipped on a pallet. The heaviest box will be the one containing the saw body, which will weigh about 375 - 425 depending on if you get our 1.75hp or 3hp model. The best way to move this box is to open it and remove the 2 cast iron wings, which will lighten it by 80 lbs. Having a furniture dolly or hand truck is most helpful in this process. The dimensions of that box is 31"L x 42"W x 30"H.
Thank you very much for your interest in SawStop! The Professional Cabinet saw is, as Skip M says, shipped on a pallet. The heaviest box will be the one containing the saw body, which will weigh about 375 - 425 depending on if you get our 1.75hp or 3hp model. The best way to move this box is to open it and remove the 2 cast iron wings, which will lighten it by 80 lbs. Having a furniture dolly or hand truck is most helpful in this process. The dimensions of that box is 31"L x 42"W x 30"H.
- Reply(1)
- Inaccurate
- SawStop S SawStop Expert on Nov 27, 2017
Can the great SawStop mobile base be adapted to other stationary tools?
BEST ANSWER: I suppose so , it is kind of an expensive solution to that problem.
- Reply
- Inaccurate
- Sandy C on Sep 6, 2018
- Purchased on Sep 5, 2016
Frequently Bought Together
More Suggestions
And it is a well made product