VIEW
GRP25382_1
In stock
Eliminate banging cabinet doors with the smooth, whisper-soft closing action of new BLUMotion hinges!
Virtually invisible damping mechanism in the much-loved Clip Top hinge design. 3-way adjustability and clip-on ease of the original. Each hinge has a switch for turning the soft-close feature on or off. Smooth, whisper-soft closing action paired with an equally graceful appearance make the new BLUMotion hinges a standout for visual and tactile aesthetics. No more rattling glasses and banging cabinet doors and no bulky apparatus on the outside of the hinge. Switching off one hinge on smaller, lighter doors allows the same soft-close speed throughout your kitchen. Self-lubricating with a full 110° opening angle. Compatible with doors up to 1" thick. Hinges include sleek screw caps as well as hinge plates for various overlays. If existing hole is less than 13mm deep, shims are available that allow retrofitting without reboring (sold separately, #35245). Angle restriction clips (sold separately, #31075) are also available to prevent doors from colliding with adjacent walls and cabinets when opened. Due to the new hinging action of the soft-close hinge, the original Clip Tops and Soft-Close Clip Tops may not be combined in the same door.
Related Products
We recommend using our JIG IT® Deluxe Concealed Hinge Drilling System with the JIG IT® Hinge Plate Template A to make installation of these hinges accurate and easy.
(2) Blum Soft-Close BLUMotion Clip Top Overlay Hinges
(1) Package of Mounting Screws with Screw Caps
(2) Mounting Plates
(1) Package of Mounting Screws with Screw Caps
(2) Mounting Plates
| Brand | Blum |
|---|---|
| Manufacturer Part Number | N/A |
| Weight | 0.5000 |
| Tech Spec | N/A |
| Technical Documents | |
| Application | N/A |
| Cabinet Application | N/A |
| Open Degree | 110 |
| Finish | Nickel |
| Style | Soft Close |
| Tab | N/A |
| Cup Diameter | 35mm |
| Cup Depth | N/A |
| Minimum Door Thickness | 0mm |
| Maximum Door Thickness | 26mm |
| Adjustments | 3-way Cam |
| Gap | N/A |
| Demountable | N/A |
| Minimum Reveal | N/A |
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.govWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
4.8 / 5.0
46 Reviews
Good hinge
Very good quality hinge. Easy to adjust. Little pricey but you get what you pay for.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Perfect
They work perfectly but they have only been on for a few weeks. Time will tell.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Excellent hinge
Simple to install and adjust to fit doors to the opening. The covers dress up the hinge and make a professional install look for the project.
Would have liked some direction on how to place the wall attachment so I could maximize all of the adjustment features of this hinge. I almost ran out of adjustment aspects. The "up/down" adjustment was very handy in getting the doors to align vertically. All in all a great hinge, and I will probably use them on another door project when that time comes.
Would have liked some direction on how to place the wall attachment so I could maximize all of the adjustment features of this hinge. I almost ran out of adjustment aspects. The "up/down" adjustment was very handy in getting the doors to align vertically. All in all a great hinge, and I will probably use them on another door project when that time comes.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Easy to install, work very well in my application.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Fantastic hinges that always impress.
These hinges are the absolute best for full overlay. I used 4 for a heavy full length mirror hung over a recessed medicine cabinet. Worked like a charm and they are a bit forgiving :)
Added Apr 20, 2018
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
After buying “off” brand concealed hinges, these are good hinges for the price.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
High quality hinge for a fair retail price.
I would recommend this hinge for the project it was used on.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Blumotion hinges
Great hinge with smooth action.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Great product!
They do exactly what they’re supposed to do. Love the 3-way adjustability!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Consistent high quality
I have been using Blum cabinet hinges for many years. The consistent high quality and ease of installation sold me right off. I made my own marking and drilling guides and it was very easy. So far, I have found the template/guides that I made have worked all of the various Blum hinges I have installed. I especially like that I can get my doors installed in the shop, then easily unclip them for installation.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 22 questions
Browse 22 questions
and 65 answers
How much weight will each hinge support?
do these hinges let the inside surface of the door and cabinet be flush when the door is open to 90 degrees, I need all the inside cabinet space and the doors must be flush or greater when open @ 90 degrees. Cabinet sides are 3/4" (actually 20mm), doors are the same?
BEST ANSWER: These hinges take up a little bit of space inside the cabinet. You need the Blum hinges that open extra wide. Thee hinges are bulky and expensive.
- Reply
- Inaccurate
- Painter613 on Feb 28, 2016
- Purchased on Feb 6, 2016
can these hinges accommodate a door 1 1/8" thick?
BEST ANSWER: These hinges are set up for up to 1" thick door. Hinges #55864 and #55872 however can handle a door up to 1-1/4"
- Reply
- Inaccurate
- Rick H Staff on Sep 22, 2015
Will these hinges work on a frameless cabinet with 7/8" thick sides and a full overlay (7/8") door that's 5/8" thick?
BEST ANSWER: the full overlay hinges should clear the opining of the doors being 7/8" offset. I mocked up 1/8th thick to my cabinet and door hinge side and it seem to clear and open fully. Be sure to add the proper distance (1/8") to both mounting and drill locations. BUT with a 5/8" thick door my drill 32mm drill bit will just about poke through the material. Maybe file down point and clamp down doors using a drill press to avoid wondering should work.
- Reply
- Inaccurate
- BRAD T on Jun 15, 2015
- Purchased on Dec 6, 2014
Can I use these hinges on 1/2 thick plywood doors?
BEST ANSWER: No. The recessed hole required is to seat the hinge in the back of the door must be 11 mm deep (7/16"), which would not leave enough material in the face of the door, especially if the plywood is less than 1/2" (which almost all of it is now-a-days).
- Reply(3)
- Inaccurate
- William S on Aug 4, 2016
- Purchased on Mar 20, 2015
I have lost some of the small screws and having a hard time finding replacement screws. Lowes told me they were .4 x .8. Is that correct?
Can I use just one Soft-Close BLUMotion hinge per door?
BEST ANSWER: The question I believe is if he can use a conventional hinge and one soft close as a pair. I did exactly that and it works fine. If you are asking to use only one hinge per door, than I agree with the other answer.
- Reply
- Inaccurate
- Bill T on Aug 27, 2016
- Purchased on Aug 7, 2016
I am building a cabinet with a thick heavy door ~5.5" thick, will these hinges work, or will I need an old piano hinge?
BEST ANSWER: Since they are overlay, the the only problem with thickness might be that the door won't open completely without it hitting the cabinet. . . I would also be concerned about the weight of the door. 90 degree hinges might be a better bet if the door isn't too heavy, then you wouldn't have to worry about the outside edge of the door damaging the front of the cabinet. . .
- Reply
- Inaccurate
- Sean O on Jun 13, 2017
- Purchased on Jun 26, 2015
Is hinge overlay 3/4 inch?
BEST ANSWER: Yes they are set up for 3/4", but the instructions tell you how to set up for different thicknesses.
- Reply
- Inaccurate
- Christopher F on Aug 10, 2015
- Purchased on Apr 2, 2015
Can these hinges work with 3/8" and 1/2" overlay?
BEST ANSWER: The half overlay should adjust to 3/8" and the full overlay could adjust in to 1/2", but you may have to trim the door a bit.
- Reply
- Inaccurate
- ROBERT F on Aug 20, 2018
- Purchased on Jan 9, 2018
Can i use these hinges for a lazy suzan door to door?
BEST ANSWER: I would use #81018 for lazy susan door to door
- Reply
- Inaccurate
- Rick H Staff on Apr 1, 2016
What is the overlay that results using this hinge and included mounting plate? Or, what is the mounting plate height?
BEST ANSWER: This hinge is a half overlay hinge which means the overlay is 3/8.
- Reply(1)
- Inaccurate
- david d on May 29, 2015
- Purchased on Apr 4, 2015
will these work for roll out drawers?
What style do I need for 1/4” overlay doors?
Need replacement hinge to fit 1/2" thick doors ?
I want to retrofit my cabinets with soft close hinges. They currently have Blum E32, 9/16", 110 degree, 34.355-01.01 hinges. Is there a Blum hinge I can order that I can simply swap out without any drilling or other work?
My client changed their minds and does not want handles and wants push open instead. Can I turn off the slow close feature of these hinges and install a tip-on touch latch? It would be easier than returning the soft close hinges and buying self closing hinges instead.
Will these hinges close strong enough where these latches would close and lock? http://www.rockler.com/safe-push-touch-latches-select-size-and-color
Blum® 110° Soft-Close BLUMotion Clip Top Overlay Hinges for Frameless Cabinets
Can I get a small euro full overlay hinge where the inset to the mounting screws inside the cabinet is less that 37 mm? I need it to be about 30 mm..
i need a hinge for frameless cabinet. Want to know the maximum overlay possible with 110?
Hi, I have a frameless bookcase that i am going to add four doors to, two outer and two inner. The inner doors are share a common 3/4" frameless partition, and will be half-overlay. Outer will be full overlay. Question is, will the mounting screws on the on the inner frameless 3/4" think partition hit each other and not go in all if the hinges are at the same height on opposite sides of this partition? How deep to these screws mount into the wooden inner partition?
Frequently Bought Together
More Suggestions