All categories
Page 3 - Sanding and Finishing Projects
-
Categories: Sanding and Finishing ProjectsJuly 15, 2022Refinishing is time-honored method of updating cabinetry, and if your cabinets are in reasonably good repair, it can yield attractive results - along with a sense of personal satisfaction.Read more -
Categories: Sanding and Finishing ProjectsMay 11, 2022There are two popular methods for using a template to smooth out the edges of curved parts: a flush-trim router bit, and a sanding drum equipped with a template guide. Both have their advantages.Read more
-
Categories: Sanding and Finishing ProjectsApril 28, 2022Nothing catches the eye like a big old scratch or chip right in the middle of an otherwise beautifully finished wood surface – except, possibly, a failed repair attempt.Read more
-
April 28, 2022Our 3-in-1 Cabinet Scraper Sharpening Tool is the only tool on the market to combine a file, 2500-grit diamond hone and hardened steel burnishing rod into one tool to cover the entire process of sharpening a card scraper. It simplifies the multi-step process of restoring a sharp edge to card scrapers and cabinet scrapers. Thanks to the angle guides on the sides, it promises a uniform burr for incredibly thin shavings. The parts of the sharpener are numbered with the sequential steps needed for a sharp edge: file, hone, draw the burr and turn the burr.Read more
-
Categories: Sanding and Finishing ProjectsApril 18, 2022Milk paint is a traditional, casein based paint that's been around for centuries and has, in recent years, enjoyed a remarkable resurgence in popularity.Read more
-
Categories: Sanding and Finishing ProjectsApril 14, 2022What is meant by wet sanding and what situations is it useful for?Read more
-
Categories: Sanding and Finishing ProjectsApril 08, 2022How do you avoid the light areas in stain finishes caused by glue spots?Read more -
Categories: Sanding and Finishing ProjectsJanuary 27, 2022What is the best way to remove dust before applying the final finish?Read more
-
Categories: Sanding and Finishing ProjectsJanuary 14, 2022Is there an easy way to hold and mount the door so you have the same 3/8" overlay all around?Read more
-
Categories: Sanding and Finishing ProjectsDecember 24, 2021Is there a good, heat-resistant finish for small wood projects like coasters, trivets and table chargers?Read more
-
December 03, 2021Will using a different tool eliminate the chance of snipe while smoothing out a board?Read more